N18 工业控制机与计算技术应用装置 标准查询与下载

DIN EN 60770-3:2015 工业过程控制系统用发送机.第3部分:智能发射机的性能评定方法(IEC 60770-3-2014);德文版本EN 60770-3-2014

Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters (IEC 60770-3:2014); German version EN 60770-3:2014

BS EN 62714-2:2015 工业自动化系统中使用的工程数据交换格式. 自动化标记语言. 角色类别库

Engineering data exchange format for use in industrial automation systems engineering. Automation markup language. Role class libraries

BS EN 62541-11:2015 OPC统一架构. 历史数据存取

OPC unified architecture. Historical Access

BS EN 61285:2015 工业过程控制 分析仪室的安全

Industrial-process control. Safety of analyzer houses

BS IEC 62014-4:2015 IP-XACT, 机床流程内封装, 集成和再利用IP的标准结构

IP-XACT, Standard Structure for Packaging, Integrating, and Reusing IP within Tool Flows

BS IEC 62014-5:2015 系统和片上系统 (SoC) 设计使用电子和软件知识产权的质量

Quality of Electronic and Software Intellectual Property Used in System and System on Chip (SoC) Designs

BS ISO 15746-1:2015 自动化系统和集成. 制造系统用先进过程控制和优化能力集成. 框架和功能模型

Automation systems and integration. Integration of advanced process control and optimization capabilities for manufacturing systems. Framework and functional model

DIN EN 61131-9:2015 可编程控制器. 第9部分: 小型传感器和致动器 (SDCI) 单滴数字通信接口 (IEC 61131-9-2013); 德文版本EN 61131-9-2013

Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) (IEC 61131-9:2013); German version EN 61131-9:2013

DIN EN 61158-1:2015 工业通信网络. 现场总线规格. 第1部分: IEC 61158和IEC 61784系列的概述和指南 (IEC 61158-1-2014); 德文版本EN 61158-1-2014

Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series (IEC 61158-1:2014); German version EN 61158-1:2014

IEC 61285:2015 工业过程控制.分析器罩的安全

This International Standard describes the physical requirements for the safe operation of the process analyser measuring system installed in an analyser house (AH) in order to ensure its protection against fire@ explosion and health hazards. This standard applies for analyser houses with inner and/or external potential explosive atmospheres and it applies to hazards caused by toxic substances or asphyxiant gases. (Refer to national guidelines on toxic hazards.) This standard does not address facilities where solids (dust@ powder@ fibres) are the hazard. This standard does not seek to address all functional safety issues related to analyser houses. Clause 4 addresses the location of the AH and connection within the process plant areas. Clause 5 addresses the design@ construction and layout of the AH. It does not address parts of the analyser measuring system installed in other locations such as sample conditioning rooms (SCR) or switchgear rooms. Clause 6 addresses measures for reducing the danger of explosion for AHs while permitting maintenance of equipment with the power on and the case open. For most fluids@ the major constraint is that the concentration of vapours@ which are toxic for personnel@ is lower than the lower explosive (flammable) limit (LEL) (see Clause 7). Using n-Pentane as an example@ the LEL is 1@4 % or 14 000 ?? 10?C6@ the level immediately dangerous to life or health (which is the maximum level from which a worker could escape within 30 min without any escape-impairing symptoms or any irreversible health effects) is only 0@5 % or 5 000 ?? 10?C6. Clause 7 addresses those measures for protecting personnel from materials in the atmosphere of AHs that are hazardous to health.

Industrial-process control - Safety of analyser houses

BS EN 62351-3:2014 动力系统管理和相关的信息交换.数据和通信安全.通信网络和系统安全.包括TCP/IP的剖面

Power systems management and associated information exchange. Data and communications security. Communication network and system security. Profiles including TCP/IP

GOST R 8.883-2015 确保测量一致性的国家系统. 仪表测量软件. 测量信息的处理, 存储, 保护以及传输算法. 评估程序

State system for ensuring the uniformity of measurements. Software of measuring instruments. Algorithms of processing, storage, protection and transmission of measuring information. Test methods

KS B ISO 3511-3:2014 过程测量的控制功能和仪表设备.符号表示法.第3部分:仪表接线图的详细符号

Process measurement control functions and instrumentation — Symbolic representation — Part 3: Detailed symbols for instrument interconnection diagrams

KS B ISO 3511-2:2014 过程测量的控制功能和仪表设备.符号表示法.第2部分:基本要求的补充

Process measurement control functions and instrumentation — Symbolic representation — Part 2: Extension of basic requirements

ISO 10303-210:2014 工业自动化系统与集成.产品数据表示与交换.第210部分:应用协议:电子装配,互联与包装设计

Industrial automation systems and integration - Product data representation and exchange - Part 210: Application protocol: Electronic assembly, interconnect and packaging design

BS EN 62714-1:2014 工业自动化系统中使用的工程数据交换格式. 架构和通用要求

Engineering data exchange format for use in industrial automation systems engineering. Architecture and General Requirements

BS ISO 22400-1:2014 自动化系统和集成. 生产运作管理的关键绩效指标 (KPI). 综述, 概念和术语

Automation systems and integration. Key performance indicators (KPIs) for manufacturing operations management. Overview, concepts and terminology

BS EN 60770-3:2014 工业过程控制系统用发射机.智能发射机的性能评估方法

Transmitters for use in industrial-process control systems. Methods for performance evaluation of intelligent transmitters

NF C46-030*NF EN 62382:2014 加工工业中的控制系统. 电气和仪表回路核查

La présente Norme internationale décrit la marche à suivre recommandée pour réaliser un contrôle de boucle, qui se compose des activités comprises entre l'achèvement de la construction de la boucle (installation et contrôles de point à point) et le début de la mise en service à froid. La présente norme s'applique à la construction de nouvelles usines, ainsi qu'à l'extension ou à la modernisation des installations de systèmes électriques, d'appareillage et de commande (Electrical and Instrumentation and control systems, E&I) dans les usines existantes (automates programmables, systèmes d'automatisation de bâtiment (Building Automation Systems, BAS), systèmes

Control systems in the process industry - Electrical and instrumentation loop check

IEC 61158-3-12:2014 工业通讯网络.数据总线规范.第3-12部分:数据联络层设备定义.12型元件

"General This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term ""time-critical"" is used to represent the presence of a time-window@ within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions@ with attendant risk to equipment@ plant and possibly human life. This standard defines in an abstract way the externally visible service provided by the Type 12 fieldbus data-link layer in terms of a) the primitive actions and events of the service; b) the parameters associated with each primitive action and event@ and the form which they take; c) the interrelationship between these actions and events@ and their valid sequences. The purpose of this standard is to define the services provided to the Type 12 fieldbus application layer at the boundary between the application and datalink layers of the fieldbus reference model; systems management at the boundary between the data-link layer and systems management of the fieldbus reference model. Specifications The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications@ and thus supplement the OSI Basic Reference Model in guiding the development of data-link protocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless@ it is not a formal programming interface@ and any such interface will need to address implementation issues not covered by this specification@ including a) the sizes and octet ordering of various multi-octet service parameters@ and b) the correlation of paired request and confirm@ or indication and response@ primitives. Conformance This standard does not specify individual implementations or products@ nor does it constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead@ conformance is achieved through implementation of the corresponding data-link protocol that fulfils the Type 12 data-link layer services defined in this standard."

Industrial communication networks - Fieldbus specifications - Part 3-12: Data link layer service definition - Type 12 elements