N20 电工仪器、仪表综合 标准查询与下载

KS C IEC 60751:2003 工业铂电阻温度计传感器

이 규격은 전기적인 저항이 온도의 함수인 산업용 백금 저항체 온도 센서에 대한 요구 사

Industrial platinum resistance thermometer sensors

BS EN 61010-2-051:2003 测量、控制和实验室用电气设备安全性要求.混合和搅拌用实验室设备的详细要求

Replacement: Replace the whole text by the following new paragraph: This part of IEC 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or homogeneity of materials and their accessories. Such devices may contain heating elements. NOTE If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other part 2 standards. The requirements for equipment which contain heating devices are given in IEC 61010-2-010.

Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for mixing and stirring

BS EN 61010-2-061:2003 测量、控制和实验室用电气设备安全性要求.具有热原子化和离子化的实验室原子光谱测定仪的详细要求

1 Equipment included in scope Replacement: This part of IEC 61010 applies to electrically powered laboratory atomic spectrometers with thermal atomization. NOTE 1 Examples include atomic absorption spectrometers, emission flame photometers, atomic fluorescence spectrophotometers, inductively coupled plasma spectrometers, microwave coupled plasma spectrometers and mass spectrometers, all with thermal atomization and ionization (including tubing and connectors which are provided by the manufacturer for connection to external supplies). NOTE 2 If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other part 2 standards. 2 Equipment excluded from scope Addition: Add as the first paragraph: This standard does not apply to thermal atomization detectors (flame ionization detectors) used in gas chromatography.

Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

BS EN 61010-2-010:2003 测量、控制和实验室用电气设备安全性要求.材料加热用实验室设备的详细要求

This clause of Part 1 is applicable except as follows: 1 Equipment included in scope Replacement: Replace the text by the following: This part of IEC 61010 applies only to electrically powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment. NOTE If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard, it will also need to meet the requirements of those other part 2 standards. In particular, if equipment is intended to be used for IVD purposes, it will need to meet the requirements of IEC 61010-2-101 2 Equipment excluded from scope Addition: Add the following three new items after item i) aa) equipment for the heating and ventilation of laboratories; bb) sterilizing equipment; cc) heating equipment which the OPERATOR is intended to enter, and which is large enough for the OPERATOR to remain inside with the door or doors closed.

Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material

KS C IEC 62053-31:2003 交流电度表.特殊要求.第31部分:电机和电子仪表(两线式)的脉冲输出装置

IEC 62053의 이 부는 기술 위원회 13(참조 규격을 참조할 것.)의 관련 규격에

Electricity metering equipment(a.c.)－Particular requirements－Part 31：Pulse output devices for electromechanical and electronic meters (two wires only)

KS C IEC 60736:2003 电能仪表的试验设备

이 규격은 정밀도 등급이 0.5, 1과 2급의 전력량계 형식 시험과 수락(accepta

Testing equipment for electrical energy meters

KS C IEC 60387:2003 交流电量表的符号

이 규격은 기계식이나 전자식 측정 소자에 관계없이, 교류 전기 계기와 그들의 보조 장치

Symbols for alternating-current electricity meters

KS C IEC 62059-11:2003 电量计量设备.可靠性.第11部分:通用概念

IEC 62059에 관한 이번 규격은 전력량 계측과 부하 제어를 위한 전자식 계량 장치

Electricity metering equipment－Dependability－Part 11：General concepts

DIN EN 62052-11:2003 电测量仪器.一般要求、试验和试验条件.第11部分:测量仪器

Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment (IEC 62052-11:2003); German version EN 62052-11:2003

DIN EN 61010-2-101:2003 测量、控制和实验室用电气设备的安全要求.第2-101部分:体外诊断(IVD)医疗设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-101: Particular requirements for in vitro diagnostic (IVD) medical equipment (IEC 61010-2-101:2002, modified); German version EN 61010-2-101:2002

NF C42-544-3:2003 仪表用变压器.第3部分:组合式变压器

Instrument transformers - Part 3 : combined transformers.

KS C IEC 60338:2003 耗量和需量的遥测仪器

전기 요금과 통계적인 목적으로 특별히 요구되는 전자식 미터와 접목되어 운영되려는 신규

Telemetering for consumption and demand

KS C IEC 62053-61:2003 交流电度表.特殊要求.第61部分:动力消耗和电压要求

이 규격은 하나 이상의 전기 에너지를 측정하는 combined meters와 IEC 6

Electricity and metering equipment(a.c.)－Particular requirements－Part 61：Power consumption and voltage requirements

BS EN 60052:2002 用标准(空)气隙法测量电压

IEC 60052 sets forth recommendations concerning the construction and use of standard air gaps for the measurement of peak values of the following four types of voltage: a) alternating voltages of power frequencies; b) full lightning impulse voltages; c) switching impulse voltages; d) direct voltages. Air gaps constructed and used in accordance with this standard represent IEC standard measuring devices in accordance with IEC 60060-2 and are primarily intended for performance checks of high voltage measuring systems.

Voltage measurement by means of standard air gaps

UL 61010B-2-031-2003 测量、控制及实验室用电气设备.第2部分:电测量及试验用手持探头组件的特殊要求

Replacement： This International Standard applies to hand--held and hand--manipulated PROBE ASSEMBLIES of the types described below，and related accessories These PROBE ASSEMBLIES are for use in the interface between an electrical phenomenon and a measuring or test instrument They may be stand-alone PROBE ASSEMBLIES which are themselves within the scope of part 1，or accessories to other equipment within the scope of pa rtl a)Low—voltage and high—voltage，non—attenuating PROBE ASSEMBLIES(type A) Non-attenuating PROBE ASSEMBLIES for direct connection to voltages not exceeding 63 kV r m s or d．c They do not incorporate active components，nor are they intended to provide a voltage divider function or a signal conditioning function，but they may contain passive non-attenuating components such as fuses b)High-voltage attenuating or divider PROBE ASSEMBLIES(type B) Attenuating or divider PROBE ASSEMBLIES for direct connection to voltages exceeding 1 kV r m s or d．c but not exceeding 63 kV r m s Or d c The divider function may be carried out wholly within the PROBE ASSEMBLY，or partly in the test or measu ring equipment intended to be used with the c)Low-voltage attenuating or divider PROBE ASSEMBLIES(type C) Attenuating，divider or other signal conditioning PROBE ASSEMBLIES for direct connection to voltages exceeding 30 V rm s or42，4 V peak or 60 V d c，but not exceeding 1 kV r m s，peak or d c The signal conditioning function may be carried out wholly within the PROBE ASSEMBLY，or partly within the test or measuring equipment intended to be used with the PROBE ASSEMBLY

UL Standard for Safety Electrical Equipment for Measurement, Control, and Laboratory Use; Part 2: Particular Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test First Edition

BS EN 62052-11:2003 电量计量设备(AC).一般要求、试验和试验条件.计量设备

This part of IEC 62052 covers type tests for electricity metering equipment for indoor and outdoor application and applies to newly manufactured equipment designed to measure the electrical energy on 50 Hz or 60 Hz networks, with a voltage up to 600 V. It applies to electromechanical or static meters for indoor and outdoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, such as maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements apply. It does not apply to: a) portable meters; b) data interfaces to the register of the meter; c) reference meters. For rack-mounted meters, the mechanical properties are not covered in this standard.

Electricity metering equipment (AC) - General requirements, tests and test conditions - Metering equipment

IEC 61010-2-061:2003 测量、控制和实验室用电气设备的安全要求.第2-061部分:具有热原子化和离子化的实验室用原子能谱仪的特殊要求

Equipment included in scope Replacement: This part of IEC 61010 applies to electrically powered laboratory atomic spectrometers with thermal atomization. NOTE 1 Examples include atomic absorption spectrometers@ emission flame photometers@ atomic fluorescence spectrophotometers@ inductively coupled plasma spectrometers@ microwave coupled plasma spectrometers and mass spectrometers@ all with thermal atomization and ionization (including tubing and connectors which are provided by the manufacturer for connection to external supplies). NOTE 2 If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard@ it will also need to meet the requirements of those other part 2 standards. Equipment excluded from scope Addition: Add as the first paragraph: This standard does not apply to thermal atomization detectors (flame ionization detectors) used in gas chromatography.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

IEC 61010-2-010:2003 测量、控制和实验室用电气设备的安全要求.第2-010部分:材料加热用实验室设备的特殊要求

Scope and object?This clause of Part 1 is applicable except as follows:Equipment included in scopeReplacement:Replace the text by the following:This part of IEC 61010 applies only to electrically powered laboratory equipment for the heating of materials@ where the heating of materials is the only function or is one of several functions of the equipment.NOTE If all or part of the equipment falls within the scope of one or more other part 2 standards of IEC 61010 as well as within the scope of this standard@ it will also need to meet the requirements of those other part 2 standards. In particular@ if equipment is intended to be used for IVD purposes@ it will need to meet the requirements of IEC 61010-2-101.Equipment excluded from scopeAddition:Add the following three new items after item i):aa) equipment for the heating and ventilation of laboratories;bb) sterilizing equipment;cc) heating equipment which the OPERATOR is intended to enter@ and which is large enough for the OPERATOR to remain inside with the door or doors closed.

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials

NF C42-736:2003 测量、控制和试验室用电气设备的安全要求.第2-081部分:分析用及其它用途的自动和半自动试验室设备的特殊要求

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-081 : particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes.

BS EN 50249:2003 地下管道和电缆用电磁波监测器.性能和安全

Electromagnetic locators for buried pipes and cables - Performance and safety