N22 电能测量和负荷控制系统 标准查询与下载

DIN EN 62058-21:2011 电能测量设备(交流).验收检查.第21部分:机电式有功电能表的特殊要求(0.5,1和2级及指数A和B级)(IEC 62058-21-2008, 修订版);德文版本EN 62058-21-2010

Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B) (IEC 62058-21:2008, modified); German version EN 62058-21:2010

DIN EN 62058-31:2011 电能测量设备(交流).验收检查.第31部分:静止式有功电能表的特殊要求(0.2S,0.5S,1和2级及指数A和B级)(IEC 62058-31-2008,修订版);德文版本EN 62058-31:20

Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C) (IEC 62058-31:2008, modified); German version EN 62058-31:20

ANSI C12.10-2011 功率表的物理属性.安全标准

Covers the physical aspects of both detachable and bottom-connected watthour meters and associated registers. These include ratings, internal wiring arrangements, pertinent dimensions, markings and other general specifications. Refer to the latest versions of ANSI C12.1 and ANSI C12.20 for performance requirements.

Physical Aspects of Watthour Meters - Safety Standard

KS C 1201-2010 电度表通则

이 표준은 교류 회로에 사용하는 전력량계 및 무효 전력량계(이하 계기라 한다.)와 이들의

General rules for electricity meters

NF C44-058-31*NF EN 62058-31:2010 电计量设备(直流).验收检验.第31部分:有功电能用静态电度表的特殊要求(0,2 S,0,5 S,1和2级,指数A,B和C).

Electricity metering equipment (a.c.) - Acceptance inspection - Part 31 : particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2 and class indexes A, B and C).

NF C44-058-21*NF EN 62058-21:2010 电计量设备(直流).验收检验.第21部分:有功电能用机电电度表的特殊要求(0,5,1和2级,指数A和B).

Electricity metering equipment (a.c.) - Acceptance inspection - Part 21 : particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B).

BS EN 62058-21:2010 电量表设备(交流).验收检验.有功电能用机电计量仪的详细要求(0.5,1和2级,以及类指数A和B)

This part of IEC 62058 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated electromechanical meters for active energy (classes 0,5, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. The process described herein is primarily intended for acceptance inspection between the manufacturer and the purchaser. This European standard applies to meters of accuracy classes 0,5, 1 and 2, as well as to meters of class indexes A and B. NOTE It can also be used for other purposes, for example to support initial verification.

Electricity metering equipment (a.c.). Acceptance inspection. Part 21: Particular requirements for electromechanical meters for active energy (classes 0,5, 1 and 2 and class indexes A and B)

BS EN 62058-31:2010 电量表设备(交流).验收检验.有功电能用静态计量仪的详细要求(0.2S,0.5S,1和2级,和类指数A,B和C)

This part of IEC 62058 specifies particular requirements for acceptance inspection of newly manufactured direct connected or transformer operated static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2) delivered in lots in quantities above 50. The method of acceptance of smaller lots should be agreed upon by the manufacturer and the customer. The process described herein is primarily intended for acceptance inspection between the manufacturer and the purchaser. This European standard applies to meters of accuracy classes 0,2 S, 0,5 S, 1 and 2, as well as to meters of class indexes A, B and C. NOTE It can also be used for other purposes, for example to support initial verification.

Electricity metering equipment (a.c.). Acceptance inspection. Part 31: Particular requirements for static meters for active energy (classes 0,2 S, 0,5 S, 1 and 2, and class indexes A, B and C)

BS EN 62058-11:2010 电量表设备(交流).验收检验.第11部分:一般验收检验方法

The general acceptance inspection methods specified in this part of IEC 62058 apply to newly manufactured electricity meters produced and supplied in lots of 50 and above. The process described herein can be used for assessment of conformity with the requirements of the Directive 2004/22/EC of the European Parliament and of the Council on measuring instruments (MID), using: - Module D, Declaration of conformity to type based on quality assurance of the production process: - Final product inspection and testing; - Module F, Declaration of conformity to type based on product verification: - Verification of conformity with the metrological requirements by examination and testing of every instrument; or - Statistical verification of conformity with the metrological requirements; - Module H1, Declaration of conformity based on full quality assurance plus design examination: - Final product inspection and testing. When the process is used within module F, the inspection methods selected shall meet the requirements specified in 5.3 of Annex F of the MID. See 5.5 below. It is noted, that the requirements of 5.3 of Annex F of the MID do not take into account the switching rules between normal, tightened and reduced inspection. Those switching rules, mandatory with lot-by-lot inspection, when properly applied, ensure adequate protection to the customer against poor quality, and provide incentives to the manufacturer to produce consistently good quality.

Electricity metering equipment (a.c.). Acceptance inspection. Part 11: General acceptance inspection methods

DL/T 698.2-2010 电能信息采集与管理系统.第2部分:主站技术规范

本部分规定了电能信息采集与管理系统主站的架构、基本要求、功能和性能要求。 本部分适用于电能信息采集与管理系统的设计、使用和验收。

Data acquisition and management system for electrical energy part 2: technical specification of master station

DL/T 698.35-2010 电能信息采集与管理系统.第3-5部分:电能信息采集终端技术规范 低压集中抄表终端特殊要求

本部分在DL/T 698.31电能信息采集终端通用要求的基础上,规定了低压集中抄表终端(包括低压集中器、低压采集器)的特殊要求及其相应的试验方法。 本部分适用于低压集中抄表终端的制造、检验和使用。

Data acquisition and management system for electrical energy part3-5:technical specification of electrical energy data acquisition terminal-special requirement for meter rending terminal of LV customers

DL/T 698.31-2010 电能信息采集与管理系统.第3-1部分:电能信息采集终端技术规范 通用要求

本部分规定了电能信息采集终端的通用技术要求、试验方法和检验规则。 本部分适用于电能信息采集终端的制造、检验、使用和验收。

Data acquisition and management system for electrical energy part 3-1：technical specification of electrical energy data acquisition terminal —general requirement

DL/T 698.32-2010 电能信息采集与管理系统.第3-2部分:电能信息采集终端技术规范 厂站采集终端特殊要求

本部分在DL/T 698.31电能信息采集终端通用技术要求基础上,规定了厂站采集终端的特殊要求及其相应的试验方法和检验规则。 本部分适用于厂站采集终端的制造、检验和使用。

Data acquisition and management system for electrical energy part 3-2:technical specification of electrical energy data acquisition terminal-special requirement for data acquisition terminal of power station and substation

DL/T 698.33-2010 电能信息采集与管理系统.第3-3部分:电能信息采集终端技术规范 专变采集终端特殊要求

本部分在DL/T 698.31电能信息采集终端通用技术要求基础上,规定了专变采集终端的特殊要求、试验方法和检验规则。 本部分适用于专变采集终端的制造、检验、使用。

Data acquisition and management system for electrical energy part3-3: technical specification of electrical energy data acquisition terminal - special requirement for data acquisition terminal of special transformer

DL/T 698.34-2010 电能信息采集与管理系统.第3-4部分:电能信息采集终端技术规范 公变采集终端特殊要求

本部分在DL/T 698.31电能信息采集终端通用技术要求基础上,规定了公变采集终端的特殊要求、试验方法和检验规则。 本部分适用于公变采集终端的制造、检验、使用和验收。

Data acquisition and management system for electrical energy part 3-4: technical specification of electrical energy data acquisition terminal- special requirement for data acquisition terminal of common transformer

DL/T 698.41-2010 电能信息采集与管理系统 第4-1部分:通信协议－主站与电能信息采集终端通信

本部分规定了电能信息采集与管理系统中主站和电能信息采集终端之间进行数据传输的帧格式、数据编码及传输规则。 本部分适用于点对点、多点共线及一点对多点的通信方式，适用于主站对终端执行主从问答方式以及终端主动上传方式的通信。

Data acquisition and management system for electrical energy.Part 4-1:communication protocol-master station communication with data acquisition terminal

JJF 1245.5-2010 安装式电能表型式评价大纲特殊要求静止式无功电能表(2和3级)

本大纲适用于频率为50 Hz或60 Hz的单相、三相静止式无功电能表(以下简称仪表)的型式评价。 本大纲不适用于接线端电压超过600 V(多相仪表为线对线电压)的静止式无功仪表、携带式仪表及仪表计度器的数据接口。对架装式仪表,本部分不涉及其机械性能。

Program of Pattern Evaluation of Electricity Meters-Particular Requirements- Static Meters for Reative Energy (classes 2 and 3)

JJF 1245.6-2010 安装式电能表型式评价大纲特殊要求功能类电能表

本大纲适用于频率为50 Hz或60 Hz的单相、三相多功能电能表、预付费电能表以及多费率电能表等功能类电能表(以下简称仪表)的型式评价。 本大纲不适用于接线端电压超过600 V(多相仪表为线对线电压)的仪表、携带式仪表、仪表计度器的数据接口及标准仪表。对架装式仪表,本部分不涉及其机械性能。

Program of Pattern Evaluation of Electricity Meters-Particular Requirements- Electricity Meters with Functions

JJF 1245.2-2010 安装式电能表型式评价大纲-特殊要求-机电式有功电能表(0.5、1 和2级)

本大纲适用于频率为50 Hz或60 Hz单、三相机电式有功电能表(以下简称仪表)的型式评价。 本大纲不适用于接线端电压超过600 V(多相仪表为线对线电压)的机电式仪表、携带式仪表及仪表计度器的数据接口。对架装式仪表,本部分不涉及其机械性能。

Program of Pattern Evaluation of Electricity Meters-Particular Requirements- Electromechanical Meters for Active Energy (classes 0.5, 1 and 2)

JJF 1245.3-2010 安装式电能表型式评价大纲特殊要求静止式有功电能表(0.2S、0.5S、1 和2级)

本大纲适用于频率为50 Hz或60 Hz单相、三相静止式有功电能表(以下简称仪表)的型式评价。 本大纲不适用于接线端电压超过600 V(多相仪表为线对线电压)的静止式仪表、携带式仪表及仪表计度器的数据接口及标准仪表。对架装式仪表,本部分不涉及其机械性能。

Program of Pattern Evaluation of Electricity Meters-Particular Requirements- Static Meters for Active Energy (classes 0.2S, 0.5S, 1 and 2)