N22 电能测量和负荷控制系统 标准查询与下载

JB/T 5468-1991 电度表铸造磁钢技术条件

本标准规定了电度表阻尼磁钢元件的技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于测量频率为45～65Hz的感应系电度表用阻尼磁钢元件。

Specification for casting magnetic steel of watt-hour meter

JB/T 5465.1-1991 电度表用零部件 端钮盒型式尺寸

本标准规定了电度表用端钮盒的型式、外形尺寸及主要配合尺寸。 本标准适用于固定安装使用的供测量额定频率为45~65Hz的交流有功或无功电能的感应系电度表的端钮盒。

Type and size of terminal button boxes for parts and components of watt-hour meters

BS EN 61028:1991 电气测量仪表规范.X-Y记录仪

Classification, reference conditions, marking and electrical and mechanical requirements.

Specification for electrical measuring instruments - X-Y recorders

prEN 60387-1991 IEC 387的修订.交流电表的符号

Revision of IEC 387; symbols for alternating-current electricity meters

prEN 60687-1991 IEC 687的修订.有源能量用交流静电瓦时表(0.2S和0.5S级)

Revision of IEC 687; alternating-current static watt-hour meters for active energy (classes 0.2 S and 0.5 S)

BS 5685-8:1991 电度表.第8部分:感应电度表用脉冲运行复式记录器规范

Requirements for multi-rate units (MRU's) attached to or separate from electricity meters used for the measurement of electrical energy. Can incorporate a time control, visual display, or interrogation/programming interface.

Electricity meters - Specification for impulse operated multiple registers for use with induction electricity meters

IEEE Std C12.15-1990 机电式电度表中固态用量计量器

Solid-state demand registers for electromechanical watthour meters

Solid-state demand registers for electromechanical watthour meters

DIN 43856:1989 电度表.计价定时转换开关和波纹控制接收机.连接图.端子标记.电路图

The standard deals with the specification of circuit arrangement numbers and terminal marking as well as examples of connecting diagrams for combined connection of integrating meters and tariff time-switches and ripple control receivers.

Electricity meters, tariff time switches and ripple control receivers; connection diagrams, terminal marking, circuit diagrams

IEC 60521:1988 0.5级、1级和2级交流电度表

Class 0.5, 1 and 2 alternating-current watthour meters.

BS 5685-5:1987 电度表.第5部分:多费率记数器输入输出开关或逻辑电路规范

Electrical arrangements for switching multi-rate registers and for their switch or logic outputs.

Electricity meters - Specification for input and output switching or logic arrangements for multi-rate registers for electricity meters

IEEE Std C12.10-1987 机电式电度表

This standard covers certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety features of 60 Hz, two-winding, liquid-immersed transformers rated as follow, and used for step-down or step-up purposes:

Electromechanical watthour meters

BS 5685-4:1986 电度表.第4部分:3级无功伏安小时电度表规范

Mechanical and electrical requirements for single phase and polyphase, single rate and multi-rate, reactive volt-ampe$1Qre-hour (var-hour) meters.

Electricity meters - Specification for Class 3 var-hour meters

BS 5685-2:1986 电度表.第2部分:单相投币控制预付式按时计价的、2级二部式电费率电度表和2级固定费用收受器

Mechanical and electrical requirements for meters for the measurement of alternating current electrical active energy of a frequency in the range 45-65 Hz and having a voltage across connection terminals not exceeding 600 V.

Electricity meters - Specification for single-phase coin operated prepayment flat rate and two-part tariff watt-hour meters of Class 2 and fixed charge collectors of Class 2

BS 5685-3:1986 电度表.第3部分:装有1级机电式最大需量指示器的电度表

Indicators are intended to operate as attachments coupled mechanically to watt-hour and var-hour meters.

Electricity meters - Specification for meters having Class 1 electro-mechanical maximum demand indicators

DIN 43864:1986 电度表.脉冲计将脉冲发送到收费计量表的电流接口

This standard defines the current interface for transmitting pulses from a pulsing meter to a tariff metering device.

Electricity meters; current interface for transmitting pulses from a pulsing meter to a tariff metering device

CSA C17-M84-CAN3-1984 交流电压电表.第5版.通用指令第1号

The Canadian Standards Association (CSA), under whose auspices this National Standard has been produced, was chartered in 1919 and accredited by the Standards Council of Canada to the National Standards system in 1973. It is a not-for-profit, nonstatu

Alternating-Current Electricity Metering General Instruction No 1; First Edition

DIN 43855:1983 电度表.铭牌

Watthour meters; platesFür den Anwendungsbereich dieser Norm bestehen keine regionalen oder internationalen Normen.

Watthour meters; plates

DIN 43858:1982 电度表用带导入套的旋具头

Screw driver bit with finder sleeves for watthour meterFür den Anwendungsbereich dieser Norm bestehen keine entsprechenden regionalen oder internationalen Normen.

Screw driver bit with finder sleeves for watthour meter

IEC TR3 60736:1982 电能表的试验设备

Applicable to three-phase and/or single-phase equipment used for type and acceptance testing of electrical energy meters of classes 0.5, 1 and 2. Gives units and definitions, specifies requirements of accuracy and describes the testing procedure and diel

Testing equipment for electrical energy meters

ANSI C12.8-1981 自备"A"型底座电度表安装的测试台和测试室

This standard covers the dimensions and functions of test blocks and cabinets used with self-contained A-base watthour meters.

Watthour Meters, Test Blocks and Cabinets for Installation of Self-Contained “A” Base