N22 电能测量和负荷控制系统 标准查询与下载

DIN 43854:1979 电度表的铅封螺栓

Sealing bolts for watthour metersFür den Geltungsbereich dieser Norm bestehen keine entsprechenden regionalen oder internationalen Normen.

Sealing bolts for watthour meters

HD 309.2 S1-1979 2级直接连接交流电度表.第2部分:

Class 2 direct connected alternating-current watthour meters; part 2

HD 309.1 S1-1979 2级直接连接交流电度表.第1部分:

Class 2 direct connected alternating-current watthour meters; part 1

DIN 43860-1:1978 瓦时计的附加器件.第1部分:安装带

Additional devices on watthour meters; mounting strapFür den Geltungsbereich dieser Norm bestehen keine entsprechenden regionalen oder internationalen Normen.

Additional devices on watthour meters; mounting strap

DIN 43860-2:1978 瓦时计的附加器件.第2部分:脉动控制接收机

Additional devices on watthour meters; ripple control receiverFür den Geltungsbereich dieser Norm bestehen keine entsprechenden regionalen oder internationalen Normen.

Additional devices on watthour meters; ripple control receiver

DIN 43857-2:1978 最大额定电流在６０Ａ以下的、不带仪表互感器、模塑绝缘壳体电度表.三相电度表的主要尺寸

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase metersFür den Geltungsbereich dieser Norm bestehen keine entsprechenden regionalen oder internationalen Norm

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for poly-phase meters

DIN 43857-1:1978 最大额定电流在６０Ａ以下的、不带仪表互感器、模塑绝缘壳体电度表.单相电度表的主要尺寸

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase metersFür den Geltungsbereich dieser Norm bestehen keine entsprechenden regionalen oder internationalen No

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for single-phase meters

DIN 43859:1977 仪表和传感器连接用的电度表.三相电表的主要尺寸

Watthour meters for instrument-transformer connection; main dimensions for three-phase meters

Watthour meters for instrument-transformer connection; main dimensions for three-phase meters

IEC TR 60514:1975 2类交流电度表验收检验（1.0版）

The methods and procedures included in this report apply to newly manufactured direct connected induction type watthour meters of Class 2@ covered by IEC Publication* 521@ which are produced and delivered in large quantities. They provide for 100% inspection or sampling inspection for acceptance by the purchaser.

Acceptance Inspection of Class 2 Alternating-Current Watthour Meters (Edition 1.0)

IEC TR2 60514:1975 2级交流瓦时计的验收检验

Applies to newly manufactured direct connected induction type watthour meters, which are produced and delivered in large quantities. Proposes two methods of acceptance inspection, namely 100% inspection and sampling inspection. Contains test conditions,

Class 2 direct connected alternating-current watthour meters - Part II

DIN 43857-3:1974 安装在最大额定电流可达 60 A 的无仪表变压器模压绝缘外壳的瓦时计.第3部分:单相计终端电度表盖的主要尺寸

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for single-phase meters

DIN 43857-4:1974 安装在最大额定电流可达 60 A 的无仪表变压器模压绝缘外壳的瓦时计.第4部分:多相计终端电度表盖的主要尺寸

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters

Watthour meters in moulded insulation case without instrument transformers, up to 60 A rated maximum current; principal dimensions for meter terminal cover for poly-phase meters

DIN VDE 0418-5:1973 电度表规范.第5部分:遥测计

Specifications for electric integrating meters; Telemetering devices

IEC 60338:1970 耗量和需量的遥测

Applies to telemetering apparatus, intended to operate in conjunction with electrical integrating meters, comprising: - an impulse device such that the revolutions of the rotor of the meter cause the emission of impulse signals whose number ist proportio

Telemetering for consumption and demand

DIN VDE 0418-4:1967 电度表规范.第4部分:峰值需量指示器

Specifications for electric integrating meters; Maximum demand indicators

DIN VDE 0418-2:1966 电度表规范.第2部分:无功(反应能)电度表

Specifications for electric integrating meters; Var-hour (reactive energy) meters

IEC 60211:1966 1.0级最大需量指示器

Applies to newly manufactured maximum demand indicators intended to operate as attachments to watthour meters or varhour meters, coupled mechanically thereto and to indicate the maximum of average power, active or reactive, measured during successive equ

Maximum demand indicators, Class 1.O.

DIN VDE 0418-3:1965 电度表规范.第3部分:直流电表

Specifications for electric integrating meters; Direct-current meters

IEC 60145:1963 乏-小时(无功)电度表

Applies only to newly manufactured induction type var-hour meters for the measurement of reactive energy of frequency between 40 and 60 Hz, of an accuracy class of 3.0 for ordinary usage. Contains definitions, mechanical and electrical requirements and c

Var-hour (reactive energy) meters

PD IEC-TS 60076-20:2017 电度表.计费装置辅助终端的标记

Electricity meters - Marking of auxiliary terminals for tariff devices