N30 光学仪器综合 标准查询与下载

BS ISO 10110-6:2015 光学和光子学 准备光学元件和系统的图纸 定心公差

Optics and photonics. Preparation of drawings for optical elements and systems. Centring tolerances

BS ISO 10110-19:2015 光学和光子学. 光学元件和系统用图纸的编制. 表面和部件的通用描述

Optics and photonics. Preparation of drawings for optical elements and systems. General description of surfaces and components

BS ISO 10109:2015 光学和光子学. 环境试验的选择指南

Optics and photonics. Guidance for the selection of environmental tests

BS ISO 17123-8:2015 光学和光学仪器. 测地与勘测仪器的现场程序. 实时动态 (RTK) 的GNSS现场测量系统

Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. GNSS field measurement systems in real-time kinematic (RTK)

DIN ISO 9022-2:2015 光学和光子学.环境试验方法.第2部分:冷、热和湿度(ISO 9022-2-2015)

Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2015)

DIN ISO 9022-4:2015 光学和光子学.环境试验方法.第4部分:盐雾(ISO 9022-4-2014)

Optics and photonics - Environmental test methods - Part 4: Salt mist (ISO 9022-4:2014)

DIN ISO 9022-20:2015 光学和光子学.环境试验方法.第20部分:含有硫化氢或二氧化硫的湿空气试验(ISO 9022-20-2015)

Optics and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide (ISO 9022-20:2015)

ISO 17123-8:2015 光学和光学仪器.大地测量和地质勘测仪器的现场试验程序.第8部分:实时动态差分(RTK)的GNSS现场测量系统

This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of Global Navigation Satellite System (GNSS) field measurement systems (this includes GPS, GLONASS, as well as the future systems like GALILEO) in real-time kinematic (GNSS RTK) and their ancillary equipment when used in building, surveying, and industrial measurements. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the required application at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature.

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 8: GNSS field measurement systems in real-time kinematic (RTK)

ISO 10109:2015 光学和光子学. 环境试验的选择指南

Optics and photonics - Guidance for the selection of environmental tests

BS ISO 9022-14:2015 光学和光子学.环境试验方法.露、白霜和冰

Optics and photonics. Environmental test methods. Dew, hoarfrost, ice

BS ISO 9022-17:2015 光学和光子学.环境试验方法.混合式污染和太阳辐射

Optics and photonics. Environmental test methods. Combined contamination, solar radiation

BS ISO 9022-11:2015 光学和光子学.环境试验方法.霉菌繁殖

Optics and photonics. Environmental test methods. Mould growth

BS ISO 9022-12:2015 光学和光子学 环境试验方法 污染

Optics and photonics. Environmental test methods. Contamination

ISO 9022-12:2015 光学和光子学.环境试验方法.第12部分:污染

Optics and photonics - Environmental test methods - Part 12: Contamination

ISO 9022-17:2015 光学和光子学.环境试验方法.第17部分:污染与太阳辐射复合

Optics and photonics - Environmental test methods - Part 17: Combined contamination, solar radiation

ISO 9022-14:2015 光学和光子学.环境试验方法.第14部分:露水、霜及冰

Optics and photonics - Environmental test methods - Part 14: Dew, hoarfrost, ice

ISO 9022-11:2015 光学和光子学.环境试验方法.第11部分:霉菌生长

This part of ISO 9022 specifies the methods relating to the environmental tests of optical instruments, including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) under equivalent conditions, for their ability to resist the influence of mould growth. However, complete instruments or assemblies are only tested as specified in this part of ISO 9022 in exceptional cases. Normally, representative specimens such as mounted optics, material samples, or surface coatings on representative samples are used for testing. The tests described in this part of ISO 9022 are designed for the selection of materials and components for instruments likely to be used in an environment that is conducive to mould growth, rather than for regular production control. The purpose of testing is to investigate to what extent the optical, climatic, mechanical, chemical and electrical (including electrostatic) performance characteristics of the specimen are affected by mould growth. In addition, the tests in this part of ISO 9022 are designed to assess to what extent metabolic waste products (such as enzymes or acids) excreted by fungi, cause etching, corrosion, or short-circuits on, for instance, printed circuit boards.

Optics and photonics - Environmental test methods - Part 11: Mould growth

BS ISO 9022-6:2015 光学和光子学.环境试验方法.粉尘

Optics and photonics. Environmental test methods. Dust

BS ISO 9022-3:2015 光学和光子学.环境试验方法.机械应力

Optics and photonics. Environmental test methods. Mechanical stress

BS ISO 9022-20:2015 光学和光子学.环境试验方法.第20部分:含有硫化氢或二氧化硫的湿湿空气

Optics and photonics. Environmental test methods. Humid atmosphere containing sulfur dioxide or hydrogen sulfide