N64 实验室用玻璃、陶瓷、塑料器皿 标准查询与下载

BS EN ISO 4796-1:2001 实验室玻璃器皿.瓶.螺纹颈口瓶

Specifies a series of screw-neck bottles suitable for storage of fluid liquid and solid chemicals and reagents for general laboratory use and for preparation and storage of microbiological growth media.

Laboratory glassware. Bottles. Screw-neck bottles

BS EN ISO 4796-3:2001 实验室玻璃器皿.瓶.吸气瓶

Specifies a series of aspirator bottles with a screw neck or with a conical neck, suitable for the delivery of liquid chemicals and reagents for general laboratory use.

Laboratory glassware. Bottles. Aspirator bottles

JIS B 9922:2001 无菌工作室

この規格は，送風機及びHEPA フィルタ又はULPAフィルタを内蔵し,作業空間を一定の空気清浄度(以下，清浄度という。)に維持するクリーンべンチ()について規定する。ただし,作業空間が負圧となる構造のものには適用しない。注() トンネルユニット，フアンフィルタユニット及びクリーンブースについても適用できる。なお，ファンフィルタユニットについては，附属書(規定)による。

Clean work station

ASTM C1509-01 串珠工艺玻璃管和配件的标准规范

1.1 This specification covers chemically resistant, low expansion Type-I borosilicate glass, Class A, (see Specification E 438) used to manufacture beaded end flanged-glass pipe and fittings for pressure and vacuum applications.

Standard Specification for Beaded Process Glass Pipe and Fittings

DIN EN 12434:2000 低温容器.低温软管

The document gives design, construction, type and production testing, and marking requirements for non insulated cyrogenic flexible hose used for the transfer of cyrogenic fluids within the following range of operating conditions. Working temperature: from -270 ?to +65 ? Maximum nominal pressure: 80 bar; Nominal size (DN): from 10 to 100.#,,#

Cryogenic vessels - Cryogenic flexible hoses; German version EN 12434:2000

NF B35-355:2000 实验室玻璃器皿 脱脂牛奶丁酸计 双容量

Verrerie de laboratoire - Butyromètres à lait écrémé, double volume

NF B35-307*NF EN ISO 1042:2000 实验室用玻璃器皿.单刻度容积测量烧瓶

Laboratory glasseware - One-mark volumetric flasks.

NF B35-796-1:2000 实验室玻璃器皿.瓶.第1部分:螺纹颈瓶

Laboratory glassware - Bottles - Part 1 : screw-neck bottles.

DIN 12847-2:2000 实验室玻璃器皿.血细胞计数器.刻度

The document specifies 5 rulings for haemacytometer counting chambers used for blood analysis: ruling according to Neubauer, Neubauer improved, Thoma, Thoma new and Fuchs-Rosenthal.#,,#

Laboratory glassware - Haemacytometer counting chambers - Rulings

ISO 4796-1:2000 实验室玻璃器皿 瓶 第1部分:螺纹口瓶

This part of ISO 4796 specifies a series of screw-neck bottles suitable for the storage of fluid liquid and solid chemicals and reagents in general laboratory use. These bottles are also suitable for the preparation and storage of microbiological growth media.

Laboratory glassware - Bottles - Part 1: Screw-neck bottles

ISO 4796-2:2000 实验室玻璃器皿 瓶 第2部分:锥形口瓶

This part of ISO 4796 specifies a series of bottles with a conical, wide or narrow neck with or without ground joints, suitable for the storage of liquid and solid chemicals and reagents in general laboratory use.

Laboratory glassware - Bottles - Part 2: Conical neck bottles

ISO 4796-3:2000 实验室玻璃器皿 瓶 第3部分:吸气瓶

This part of ISO 4796 specifies a series of aspirator bottles with a screw neck or with a conical neck suitable for the delivery of liquid chemicals and reagents in general laboratory use.

Laboratory glassware - Bottles - Part 3: Aspirator bottles

DIN 25412-2:2000 实验室设备.手套箱.第2部分:泄漏试验

The dokument specifies requirements relating to leak tests on glove boxes as they are described in DIN 25412-1. It is intended for use in acceptance and commissioning tests, and during the recurrent inspections of glove boxes. The purpose of the test is to provide producers, suppliers, users and the authorities with uniform basic information on methods for testing the leak tightness of glove boxes and for evaluating possible leakage rates.#,,#

Laboratory equipment - Gloves boxes - Part 2: Leakage test

ASTM E1189-00 微型滴定管(科赫型)标准规范

1.1 This specification covers two styles of glass microburets of the "Koch" type for general laboratory use.

Standard Specification for Micro-Burets (Koch Style)

ASTM E1043-00(2010) 牛奶和奶油检验用吸管标准规范

1.1 This specification covers miscellaneous pipets suitable for use in milk and cream testing procedures. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Pipets, Milk and Cream Examination

ASTM F2045-00(2011) 直接和间接读取液位的管形玻璃和塑料观测指示器的标准规范

1.1 This specification covers the requirements for direct and indirect reading sight liquid level indicators for general applications. General applications for indirect reading sight glasses are water and fuel service at working pressures 2.07 MPa (300 lb/in.2) and below, temperatures of 149°C (300°F) and below. General applications for direct reading sight glasses are applications in which the temperature does not exceed 66°C (150°F). 1.2 Direct reading sight glass indicators may consist of glass or plastic tubes with fittings including shutoff valves. Glass tubes may be used for low shock direct reading sight glass indicators in which the fluid is not compatible with plastic. 1.3 Indirect reading indicators may consist of a sealed chamber with a magnetic float or flag indicator. 1.4 Special requirements for naval shipboard applications are included in the supplement to this standard. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

ASTM E1189-00(2010) 微型滴定管(科赫型)标准规范

1.1 This specification covers two styles of glass micro-burets of the “Koch” type for general laboratory use. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Micro-Burets (Koch Style)

BS EN 12585:1999 玻璃装置、管道和管件.DN 15至DN 1000的管道和管件.兼容性和可互换性

This standard specifies the essential requirements for compatibility and interchangeability of borosilicate glass plant, piping and fittings from DN 15 to DN 1 000.

Glass plant, pipeline and fittings - Pipeline and fittings DN 15 to 1000 - Compatibility and interchangeability

SANS 128:1998 实验室玻璃器皿．单刻度量瓶

Specifies requirements for an internationally acceptable series of one-mark volumetric flasks, suitable for general laboratory purposes. The basis of adjustment, volumetric accuracy and capacity are considered and the series of capacities given. The limi

Laboratory glassware - One-mark volumetric flasks

BS ISO 3507:1999 试验室玻璃器皿.比重瓶

This International Standard specifies requirements for a series of pyknometers for general laboratory use for the determination of the densities of liquids. Specialized pyknometers for use with particular products, or otherwise not in common use, are excluded. Sufficient details to define such pyknometers should be included in International Standards which specify or describe their use. A device suitable for adjustment of the liquid level in the neck of the Reischauer pyknometer is shown in annex A.

Laboratory glassware - Pyknometers