P04 基础标准与通用方法 标准查询与下载

KS B ISO 8322-8:2002 建筑结构.测量仪器.使用中精度测定规程.第8部分:最大电流为150m的电子测距仪器

이 규격은 건축물 건립시 거리 150 m까지 측정하는 전자식 거리 측정 기기를 사용할 때

Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m

KS F ISO 7976-1:2002 建筑公差.建筑物以及建筑物产品的测量方法.第1部分:方法和仪器

이 규격은 건축물과 건축 자재의 형태와 치수 및 오차를 측정하기 위한 방법을 제시한다. 이

Tolerances for building-Methods of measurement of buildings and building products-Part 1:Methods and instruments

KS F ISO 7976-2:2002 建筑公差.建筑物以及建筑物产品的测量方法.第2部分:测量位置

이 규격에서는 건물과 건축 자재를 측정하는 데 사용되는 측정점의 위치에 대한 지침을 제시한

Tolerance for building-Methods of measurement of building and building products-Part 2:Position of measuring points

HB 10215-2002 CDM 规则.程序手册

Addresses the full range of obligations under the Construction (Design and Management) Regulations. It features flow charts, checklists, model forms, proformas and a documentation system developed by a practising planning supervisor.

CDM Regulations - Procedures manual - 2nd edition

BS EN ISO 14688-1:2002 土工技术调查研究和试验.土壤的识别和分类.识别和描述

ISO 14688-1, together with ISO 14688-2, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for soils for engineering purposes. The relevant characteristics may vary and therefore, for particular projects or materials, more detailed subdivisions of the descriptive and classification terms may be appropriate. The general identification and description of soils is based on a flexible system for immediate (field) use by experienced persons, covering both material and mass characteristics by visual and manual techniques. Details are given of the individual characteristics for identifying soils and the descriptive terms in regular use, including those related to the results of tests from the field. ISO 14688-1 is applicable to natural soils in situ, similar man-made materials in situ and soils redeposited by man. The Identification and description of rocks is covered by ISO 14689. The identification and classification of soil for pedological purposes, as well as in the framework of measurements for soil protection and for remediation of contaminated areas, is covered by ISO 11259.

Geotechnical investigation and testing - Identification and classification of soil - Identification and description

PP 5930-2002 基地调查.符合 BS 5930-1999：基地调查实用规程的高级教育指南

A guide with student activities that can also be carried out online, and also links to other related web sites.

Site investigations - Guide to BS 5930:1999 Code of practice for site investigations, for higher education

BS ISO 15686-3:2002 建筑物和已建成的资产.使用寿命计划.性能审核和检查

This part of ISO 15686 is concerned with ensuring the effective implementation of service life planning. It describes the approach and procedures to be applied to pre-briefing, briefing, design, construction and, where required, the life care management and disposal of buildings and constructed assets to provide a reasonable assurance that measures necessary to achieve a satisfactory performance over time will be implemented. The cost implications of service life planning and the broader issues of sustainability (e.g. embodied energy, land use) are not developed in this part of ISO 15686. NOTE Throughout this part of ISO 15686 the term "constructed asset" is used to include buildings; infrastructure works such as roads, bridges and pipelines; structural works such as communications masts; and other engineering works such as power stations and chemical plants.

Buildings and constructed assets - Service life planning - Performance audits and reviews

BS EN 13564-1:2002 建筑用抗洪设备.要求

This European Standard specifies types and requirements for materials, performance, design, construction and marking for factory made anti-flooding devices for faecal and/or non-faecal wastewater for use in drainage systems of buildings operating under gravity in accordance with EN 12056-1.

Anti-flooding devices for buildings - Requirements

ASHRAE JOURN 44-8 BBW-2002 ASHRAE日报第44卷第8号,2002年8月

This standard applies to nonconcentrating and concentrating solar collectors in which a fluid enters the collector through a single inlet and leaves the collector through a single outlet.

ASHRAE Journal Volume 44, Number 8: August 2002

ISO 14688-1:2002 土工学工程.土壤的识别和分类.第1部分:识别和描述

This part of ISO 14688, together with ISO 14688-2, establishes the basic principles for the identification and classification of soils on the basis of those material and mass characteristics most commonly used for soils for engineering purposes. The relevant characteristics may vary and therefore, for particular projects or materials, more detailed subdivisions of the descriptive and classification terms may be appropriate. The general identification and description of soils is based on a flexible system for immediate (field) use by experienced persons, covering both material and mass characteristics by visual and manual techniques. Details are given of the individual characteristics for identifying soils and the descriptive terms in regular use, including those related to the results of tests from the field. This part of ISO 14688 is applicable to natural soils in situ, similar man-made materials in situ and soils redeposited by man. The identification and description of rocks is covered by ISO 14689. The identification and classification of soil for pedological purposes, as well as in the framework of measurements for soil protection and for remediation of contaminated areas, is covered by ISO 11259.

Geotechnical engineering - Identification and classification of soil - Part 1: Identification and description

BS EN 1991-1-1:2002 欧洲法规 1.对结构的作用.一般作用.建筑物的密度、自重和强制负荷

(1) EN 1991-1-1 gives design guidance and actions for the structural design of buildings and civil engineering works including some geotechnical aspects for the following subjects: - Densities of construction materials and stored materials; - Self-weight of construction works; - Imposed loads for buildings. (2) Section 4 and Annex A give nominal values for densities of specific building materials, additional materials for bridges and stored materials. In addition for specific materials the angle of repose is provided. (3) Section 5 provides methods for the assessment of the characteristic values of self-weight of construction works. (4) Section 6 gives characteristic values of imposed loads for floors and roofs according to category of use in the following areas in buildings: - residential, social, commercial and administration areas; - garage and vehicle traffic areas; - areas for storage and industrial activities; - roofs; - helicopter landing areas. (5) The loads on traffic areas given in Section 6 refer to vehicles up to a gross vehicle weight of 160 kN. The design for traffic areas for heavy vehicles of more than 160 kN gross weight needs to be agreed with the relevant authority. Further information may be obtained from EN 1991-2. (6) For barriers or walls having the function of barriers, horizontal forces are given in Section 6. Annex B gives additional guidance for vehicle barriers in car parks. NOTE Forces due to vehicle impact are specified in EN 1991-1-7 and EN 1991-2. (7) For the design situations and effects of actions in silos and tanks caused by water or other materials see EN 1991-3.

Eurocode 1. Actions on structures - General actions - Densities, self-weight, imposed loads for buildings

KS F ISO 1803:2002 建筑结构.公差.尺寸精度的表示法.原则和术语

이 규격은 건축물 치수 오차의 표현에 대한 기본 원칙을 설명하고 정확도의 평가, 시방 및

Building construction－Tolerances－Expression of dimensional accuracy－Principles and terminology

DIN EN 13409:2002 液压固化地板平整复合物的试验方法.固化时间测定; 德文版本 EN 13409:2002

This European Standard specifies the measurement of setting time of a hydraulic setting floor smoothing and/or levelling compound which is referred to in the following as smoothing and/or levelling compound after mixing.

Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time; German version EN 13409:2002

DIN EN 13408:2002 液压固化地板平整复合物试验方法.粘附拉伸强度测定

Method of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength; German version EN 13408:2002

BS EN 14114:2002 建筑设备和工业设施的温湿性能.水蒸气扩散的计算.冷凝管隔热系统

This standard specifies a method to calculate the density of water vapour flow rate in cold pipe insulation systems, and the total amount of water diffused into the insulation over time. This calculation method presupposes that water vapour can only migrate into the insulation system by diffusion, with no contribution from airflow. It also assumes the use of homogeneous, isotropic insulation materials so that the water vapour partial pressure is constant at all points equidistant from the axis of the pipe. The standard is applicable when the temperature of the medium in the pipe is above 0 ℃. It applies to pipes inside buildings as well as in the open air.

Hygrothermal performance of building equipment and industrial installations - Calculation of water vapour diffusion - Cold pipe insulation systems

NF P02-101-1:2002 技术产品文件.计算机辅助设计层的组织和命名.第1部分:总则和原理

Technical product documentation - Organization and naming of layers for CAD - Part 1 : overview and principles.

NF P02-101-2:2002 技术产品文件.计算机辅助设计层的组织和命名.第2部分:结构文件中使用的概念、格式和代码

Technical product documentation - Organization and naming of layers for CAD - Part 2 : concepts, format and codes used in construction documentation.

HB 10208-2002 布线规则:指南注释5:防电击

Wiring Regulations: Guidance Note 5: Protection against electric shock - 4th edition

ARI 365-2002 工商业单一空调冷凝系统

This standard applies to factory-made Commercial and Industrial Unitary Air-conditioning Condensing Units greater than or equal to 135,000 Btuíh [39.6 kW] as defined in Section 3.

Commercial and Industrial Unitary Air-Conditioning Condensing Units

HB 10207-2002 布线规则:指南注释4:防火

Wiring Regulations: Guidance Note 4: Protection against fire - 4th edition