P04 基础标准与通用方法 标准查询与下载

HB 10205-2002 布线规则:指南注释1:设备的选择和装配

Wiring Regulations: Guidance Note 1: Selection and erection of equipment - 4th edition

HB 10209-2002 布线规则:指南注释6:过电流保护

Wiring Regulations: Guidance Note 6: Protection against overcurrent - 4th edition

ANSI/ASTM E651:2002 对已建成的建筑物进行系统分析的机构能力评价用指南

This practice is intended as a companion standard to ASTM Standard E 541, Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building. Standard E 541 covers criteria by which the technical resources of agencies may be evaluated for their capability to perform the system analysis or compliance assurance function, or both, in the evaluation and inspection of manufactured building. This standard includes questions that should be asked of system analysis and compliance assurance agencies in order for the administrative agency to evaluate their competency. Personnel matters are not highlighted in this standard since they are covered in detail in Standard E 541. This is not meant to imply that they are not important. The preferred method for utilizing this standard is for qualified personnel of the administrative agency to visit the system analysis and compliance assurance agencies' headquarters to speak to qualified personnel and examine pertinent records and documentation. Alternatively, the evaluation may be done at any location provided the agency being evaluated is fully informed as to the material and personnel they will need to have on hand for the evaluation. Some of the following will not be applicable in the evaluation of an agency that has not had prior experience as a building-evaluation organization. It is not the intent of this standard to preclude acceptance of such an agency provided it can otherwise demonstrate that its organizational procedures and experience in other product categories and experience of key personnel reflect a keen awareness of the problems and processes involved in manufactured building evaluation and thus warrant acceptance. In such instances the administrative agency may wish to consider extending provisional acceptance over a definite period of time, during which it is expected that the agency will have opportunity to gain the requisite experience and demonstrate its capabilities and compliance assurance functions for manufactured building.Failure of an agency to respond satisfactorily to one or more criteria in the following should not be sole cause for rejection. Such failure should be brought to the agency's attention and be subject to close scrutiny during subsequent reevaluations.This standard is intended to achieve uniformity in the regulation of manufactured building. It may be necessary to make changes and modifications in order to adapt to legislative or other regulatory requirements of some jurisdictions.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building

ASCE 37-02-2002 建筑过程中结构设计负荷

This standard addresses partially completed structures, as well as temporary structures used during construction. The loads specified herein are suitable for use either with strength design (such as USD and LRFD) or with allowable stress design (ASD) criteria. The loads are equally applicable to all conventional construction materials.

Design Loads on Structures During Construction

ASHRAE 147-2002 减少从制冷和空气调节设备和系统电热水器释放卤化制冷剂的游泳池评级和测试方法

This standard applies where the entire flow stream of the volatile refrigerant both enters and exits either as a “vapor only” or “liquid only” state.

Reducing the Release of Halogenated Refrigerants from Refrigerating and Air-Conditioning Equipment and Systems [Replaced: ASHRAE GUIDELINE 3, ASHRAE 3, ASHRAE 3]

HB 10206-2002 布线规则:指南注释2:隔离和转换

Wiring Regulations: Guidance Note 2: Isolation and switching - 4th edition

ASTM E1946-02 测量建筑物和建筑系统成本风险的标准实施规范

1.1 This practice establishes a procedure for measuring cost risk for buildings and building systems, using the Monte Carlo simulation technique as described in Guide E 1369. 1.2 A Computer program is required for the Monte Carlo simulation. This can be one of the commercially available software programs for cost risk analysis, or one constructed by the user.

Standard Practice for Measuring Cost Risk of Buildings and Building Systems

ASTM C1516-02 直接应用的外部精整系统应用的标准实施规范

1.1 This practice covers the minimum requirements and procedures for field application of Direct-applied Exterior Finish Systems (DEFS). Direct-applied exterior finish systems are coating systems applied over various substrates with non-metallic reinforcing mesh, in which the base coat ranges from not less than 1/16in. (1.6 mm) to 3/32 in. (2.4 mm) in dry thickness, depending on the mass of the reinforcing mesh. This base coat is subsequently covered with a finish coat that is available in a variety of textures and colors.1.2 The values stated in inch-pound units are to be regarded as the standard. The metric values given in parentheses are approximate and are provided for information purposes only.1.3 This standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Application of Direct-Applied Exterior Finish Systems

ASTM E1765-02 利用分析体系过程(AHP)进行有关建筑物和建筑系统投资的多属性决策分析的标准实施规范

1.1 This practice presents a procedure for calculating and interpreting AHP scores of a project''s total overall desirability when making building-related capital investment decisions.1.2 In addition to monetary benefits and costs, the procedure allows for the consideration of characteristics or attributes which decision makers regard as important, but which are not readily expressed in monetary terms. Examples of such attributes that pertain to the selection of a building alternative (and its surroundings) are location/accessibility, site security, maintainability, quality of the sound and visual environment, and image to the public and occupants.

Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems

GOST R 51872-2002 建筑的执行大地测量学文件.执行规则

Настоящий стандарт устанавливает требования к составу, содержанию, оформлению, контролю, порядку приема и хранения геодезической исполни

Executive geodetic documentation in construction. Performance rules

ASTM E833-02 建筑人类功效学术语(04.07)

1.1 This terminology relates to the economic evaluation of building construction as used in other standards under the jurisdiction of ASTM Committee E06 on Performance of Building Constructions, and does not necessarily correspond to the terminology used in other areas of accounting and economics.

Standard Terminology of Building Economics

ASTM E833-02a 建筑人类功效学术语(04.07)

1.1 This terminology relates to the economic evaluation of building construction as used in other standards under the jurisdiction of ASTM Committee E06 on Performance of Building Constructions, and does not necessarily correspond to the terminology used in other areas of accounting and economics.

Standard Terminology of Building Economics

ASTM F1749-02 合格设备和合格设施安全标志和标签的标准规范

1.1 This specification establishes requirements for safety signage and labels for fitness equipment as defined in 3.1.4 and fitness facilities as defined in 3.1.5. It provides for the design, placement, and minimum wording required.

Standard Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels

ASTM E1996-02 飓风引起的碎石撞击的外窗、围墙、门以及防暴风门板性能的标准规范

1.1 This specification covers exterior windows, glazed curtain walls, doors and storm shutters used in buildings located in geographic regions that are prone to hurricanes.1.2 This specification provides the information required to conduct Test Method E1886.1.3 Qualification under this specification provides a basis for judgment of the ability of applicable elements of the building envelope to remain unbreached during a hurricane; thereby minimizing the damaging effects of hurricanes on the building interior and reducing the magnitude of internal pressurization. While this standard was developed for hurricanes, it may be used for other types of similar windstorms capable of generating windborne debris.1.4 This specification provides a uniform set of guidelines based upon currently available information and research. As new information and research becomes available it will be considered.1.5 All values are stated in SI units and are to be regarded as standard. Values given in parentheses are for information only. Where certain values contained in reference documents cited and quoted herein are stated in inch-pound units they must be converted by the user.1.6 The following precautionary statement pertains only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes

NF P94-331:2001 特种土工作业施工.喷射灌浆

Execution of special geotechnical works - Jet grouting.

PP 8888-1-2001 工程绘图规程.第1部分:学校和学院使用BS 8888:2000：技术产品文献的指南

Engineering drawing practice - Part 1: A guide for schools and colleges to BS 8888:2001: Technical product documentation

DLA A-A-55614 VALID NOTICE 1-2001 扩展护罩(非钻井扩大式壁锚)

A-A-55614, dated 19 July 1995, has been reviewed and determined to be valid for use in acquistion.

SHIELD, EXPANSION (NON-DRILLING EXPANSION ANCHORS)

BS EN 50090-8:2001 家用和建筑物电子系统(HBES).产品符合性评定

This standard is relevant for all electronic products and systems (including their software) having home and/or building control functions. It is not restricted to products complying with the HBES standards. Parts of devices and equipment not providing HBES functionality are not included. For such device parts the relevant product standards apply. This standard defines the general conformity assessment requirements for the communication protocols. This standard indicates those standards to be used for conformity assessment of HBES products and or systems. The conformity assessment procedure provides requirements for all key elements of HBES, such as safety, including functional safety, EMC requirements and environment. These requirements are given by reference to relevant standards, where available. The assessment and testing of installed systems will be covered by EN 50090-9-2.

Home and building electronic systems (HBES) - Conformity assessment of products

IEC 62198:2001 项目风险管理 应用指南

This International Standard is applicable to any project with a technological content. It may also apply to other projects. It provides a general introduction to project risk management, its subprocesses and influencing factors. These subprocesses are: - establishing the context, including confirmation of project objectives; - risk identification; - risk assessment, including risk analysis and evaluation; - risk treatment; - review and monitoring; - communication (including consultation); - learning from the project. Guidelines are provided on the organizational requirements for implementing the process of risk management appropriate to the various phases of a project. It is recognized that, in certain circumstances, it may be inappropriate to include all the clauses of this standard within a contract. Accordingly, this standard should only be considered as forming part of a contract - however that contract may be formed - if the parties to that contract explicitly call upon and refer to this standard (or parts thereof) and require it to be included within the contract.

Project risk management - Application guidelines

DIN EN 12954:2001 土埋或液浸金属结构阴极保护.一般原则和管线应用

Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines; German version EN 12954:2001