P15 工程抗震 标准查询与下载

ISO 22762-3:2010 弹性地震防护隔离物.第3部分:建筑物应用件.规范

This part of ISO 22762 specifies minimum requirements and test methods for elastomeric seismic isolators used for buildings and the rubber material used in the manufacture of such isolators. It is applicable to elastomeric seismic isolators used to provide buildings with protection from earthquake damage. The isolators covered consist of alternate elastomeric layers and reinforcing steel plates. They are placed between a superstructure and its substructure to provide both flexibility for decoupling structural systems from ground motion, and damping capability to reduce displacement at the isolation interface and the transmission of energy from the ground into the structure at the isolation frequency.

Elastomeric seismic-protection isolators - Part 3: Applications for buildings - Specifications

DIN EN 1998-1/NA:2010 国家附录.国家制定参数.欧洲规范8:抗震结构设计.第1部分:建筑物用一般规则,地震作用及规则

National Annex - National determined paramters - Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings

KIT 212-2010 抗震性结构设计

Design of structures for earthquake resistance

ASME B31EA-2010 地上管道系统的抗震设计和改造用标准(ASME B31E-2008附录)

This Standard establishes a method for the seismic design of above-ground, metallic piping systems in the scope of the ASME B31 Code for Pressure Piping (B31.1, B31.3, B31.4, B31.5, B31.8, B31.9, B31.11).

Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems (Addenda to ASME B31E-2008)

DIN EN 15129:2010 抗地震设备.德文版本EN 15129-2009

Anti-seismic devices; German version EN 15129:2009

YD 5054-2010 通信建筑抗震设防分类标准

本标准适用于抗震设防区通信建筑工程的抗震设防分类。

Classification Standard for Seismic Protection of Telecommunication Buildings

BS EN 15129:2009 抗地震设备

This European Standard covers the design of devices that are provided in structures, with the aim of modifying their response to the seismic action. It specifies functional requirements and general design rules for the seismic situation, material characteristics, manufacturing and testing requirements, as well as evaluation of conformity, installation and maintenance requirements. This European Standard covers the types of devices and combinations thereof as defined in 3.4.

Anti-seismic devices

NF T47-700:2010 抗震装置

Anti-seismic devices.

DB/T 15-2009 活动断层探测

. 1 1 1 3 7

active fault detection

ANSI/AISC 341-2010 结构钢建筑物用地震条款

These provisions govern the design, fabrication and erection of structural steel members and connections in the seismic force resisting systems, and splices and bases of columns in gravity framing systems of buildings and other structures with moment frames, braced frames and shear walls. The design forces in these structures shall result from earthquake motions determined on the basis of various levels of energy dissipation in the inelastic range of response.

Seismic Provisions for Structural Steel Buildings

ASME B31E Addenda-2010 地上管道系统的抗震设计和改进标准

This Standard establishes a method for the seismic design of above-ground, metallic piping systems in the scope of the ASME B31 Code for Pressure Piping (B31.1, B31.3, B31.4, B31.5, B31.8, B31.9, B31.11).

Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems

ANSI/ASME B31 Addenda e-2010 地上管道系统的抗震设计和改进标准

Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems

BS PD 6698:2009 1998抗震性结构的设计建议

This Published Document provides non‑contradictory complementary information for use in the UK with BS EN 1998-1:2004, BS EN 1998-2:2005, BS EN 1998-4:2006, BS EN 1998-5:2004 and BS EN 1998-6:2005, and their UK National Annexes. This Published Document gives background information and some additional guidance on the clauses subject to National Choice in these parts of BS EN 1998. This document only covers the United Kingdom and does not consider conditions applicable to British Overseas Territories, where seismological and other aspects might be very different. It is restricted to considerations for the design of new structures within the scope of BS EN 1998-1, BS EN 1998-2, BS EN 1998-4, BS EN 1998-5 and BS EN 1998-6 to resist seismic actions.

Recommendations for the design of structures for earthquake resistance to BS EN 1998

NA to BS EN 1998-2-2005 欧洲法规8的英国国家附录.构筑物的抗震设计.第2部分:桥梁

This National Annex gives: a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1998-2:2005: 2.1(3)P 5.6.2(2)P b 2.1(4)P 5.6.3.3(1)P b 2.1(6) 6.2.1.4(1)P 2.2.2(5) 6.5.1(1)P 2.3.5.3(1) 6.6.2.3(3) 2.3.6.3(5) 6.6.3.2(1)P 2.3.7(1) 6.7.3(7) 3.2.2.3 7.4.1(1)P 3.3(1)P 7.6.2(1)P 3.3(6) 7.6.2(5) 4.1.2(4)P 7.7.1(2) 4.1.8(2) J.1(2) 5.3(4) J.2(1) 5.4(1) b) the UK decisions on the status of BS EN 1998-2:2005 informative annexes; and c) references to non-contradictory complementary information.

UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 2: Bridges

JGJ 116-2009 建筑抗震加固技术规程

本标准适用于抗震设防烈度为6～9度地区经抗震鉴定后需要进行抗震加固的现有建筑的设计及施工。 古建筑和行业有特殊要求的建筑，应按专门的规定进行抗震加固的设计及施工。

Technical specification for seismic strengthening of buildings

ANSI/AISI S110-07/S 1-2009 冷成型钢结构系统的抗震设计用标准.增补件1

Provides revisions/additions to the requirements for the design and construction of cold-formed steel members and connections in seismic force resisting systems (SFRS) in buildings and other structures.

Standard for Seismic Design of Cold-Formed Steel Structural Systems with Supplement No. 1

ANSI/AISI S110-2008 & S 1-2009 冷成型钢结构系统的地震设计用标准.专用螺栓连接的旋转轴结构含补充件1,2007版本,(2012)

Standard for Seismic Design of Cold-Formed Steel Structural Systems - Special Bolted Moment Frames including Supplement No. 1, 2007 Edition, (2012)

NA to BS EN 1998-5-2004 欧洲法规8的英国国家附录.抗地震的建筑设计.地基、支撑结构和土工技术特点

This National Annex gives: a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1998-5:2004: 3.1(3) 4.1.4(11) 5.2(2)c) b) the UK decisions on the status of BS EN 1998-5:2004 informative annexes; c) references to non-contradictory complementary information.

UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 5: Foundations, retaining structures and geotechnical aspects

NA to BS EN 1998-4-2006 欧洲法规8的英国国家附录.抗震结构的设计.贮仓、储罐和管道

This National Annex gives: a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1998-4:2006: 1.1(4) 2.1.2(4)P 2.1.3(5)P 2.1.4(8) 2.2(3) 2.3.3.3(2)P 2.5.2(3)P 3.1(2)P 4.5.1.3(3) 4.5.2.3(2)P b) the UK decisions on the status of BS EN 1998-4:2006 informative annexes; c) references to non-contradictory complementary information.

UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and pipelines

NA to BS EN 1998-1-2004 欧洲法规8的英国国家附录.抗震结构的设计.通用规则、地震影响和建筑规则

This National Annex gives: a) the UK decisions for the Nationally Determined Parameters described in the following subclauses of BS EN 1998-1:2004: b) the UK decisions on the status of BS EN 1998-1:2004 informative annexes; and c) references to non-contradictory complementary information.

UK National Annex to Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings