P16 工程防火 标准查询与下载

DIN EN 1991-1-2:2010 欧洲规范1:对结构物的作用- 第1-2部分:一般作用.暴露于火灾中对结构的作用;德文版本EN 1991-1-2-2002 + AC-2009

This methods given in this Part 1-2 of EN 1991 are applicable to buildings, with a fire load related to the building and its occupancy. This Part 1-2 of EN 1991 deals with thermal and mechanical actions on structures exposed to fire. It is intended to be used in conjunction with the fire design Parts of prEN 1992 to prEN 1999 which give rules for designing structures for fire resistance. This Part 1-2 of EN 1991 contains thermal actions related to nominal and physically based thermal actions. More data and models for physically based thermal actions are given in annexes. This Part 1-2 of EN 1991 gives general principles and application rules in connection to thermal and mechanical actions to be used in conjunction with EN 1990, EN 1991-1-1, EN 1991-1-3 and EN 1991-1-4. The assessment of the damage of a structure after a fire, is not covered by the present document.

Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire; German version EN 1991-1-2:2002 + AC:2009

DIN EN 13823:2010 建筑产品燃烧试验反应.建筑产品,包括遭受单一燃烧物热袭击的地板.德文版本EN 13823-2010

Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item; German version EN 13823:2010

DB11/ 065-2010 电气防火检测技术规范

本标准规定了变配电装置、低压配电线路、照明装置和一般低压用电设备、接地和等电位联结电气防火检测的一般要求、直观检查、仪器检测以及电气火灾隐患判断方法和结果处理。本标准适用于10kV及以下电力用户的电气防火检测。本标准不适用于矿井地下、爆炸危险场所以及防静电、防雷和消防设施的电气防火检测。

Technical specification for electrical fire detection

DIN EN 15725:2010 建筑产品和建筑构件的燃烧性能的扩展应用报告

Extended application reports on the fire performance of construction products and building elements; German version EN 15725:2010

DIN EN ISO 1716:2010 建材着火试验反应.燃烧热量测定(发热量)(ISO 1716-2010).德文版本EN ISO 1716-2010

Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010); German version EN ISO 1716:2010

BS ISO 10295-2:2010 建筑元件和构件的燃烧试验.服务设施的燃烧试验.线性接缝(缝隙)密封件

Fire tests for building elements and components. Fire testing of service installations. Linear joint (gap) seals

BS EN 13823:2010 建筑产品的着火试验反应.地板除外遭受单一燃烧物热袭击的建筑产品

This European Standard specifies a method of test for determining the reaction to fire performance of construction products excluding floorings, and excluding products which are indicated in Table 1 of EC Decision 2000/147/EC, when exposed to thermal attack by a single burning item (SBI). The calculation procedures are given in Annex A. Information on the precision of the test method is given in Annex B. The calibration procedures are given in Annexes C and D, of which C is a normative annex.

Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item

DIN EN ISO 1182:2010 产品对着火试验的反应.不可燃性试验(ISO 1182-2010).德文版本EN ISO 1182-2010

This International Standard specifies a method of test for determining the non-combustibility performance, under specified conditions, of homogeneous products and substantial components of non-homogeneous products.

Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010); German version EN ISO 1182:2010

DIN 18230-1:2010 工业建筑中的结构防火.第1部分:分析必需的抗燃烧时间

Structural fire protection in industrial buildings - Part 1: Analytically required fire resistance time

BS EN ISO 1716:2010 建筑产品着火反应试验.总燃烧热的测定(热值)

WARNING — The attention of all persons concerned with managing and carrying out this test is drawn to the fact that fire testing may be hazardous and that there is a possibility that toxic and/or harmful gases may be evolved during the test. Operational hazards may also arise during the testing of specimens, such as the possibility of an explosion, and during the disposal of test residues. WARNING — An assessment of all the potential hazards and risks to health should be made and safety precautions should be identified and provided. Written safety instructions should be issued. Appropriate training should be given to relevant personnel. Laboratory personnel should ensure that they follow written instructions at all times. This International Standard specifies a method for the determination of the gross heat of combustion (QPCS) of products at constant volume in a bomb calorimeter. Annex A describes the calculation of the net heat of combustion (QPCI) when required. Information on the precision of the test method is given in Annex B.

Reaction to fire tests for products. Determination of the gross heat of combustion (calorific value)

DIN EN 1366-4:2010 服务设施的耐火性试验.第4部分:线性接缝密封件.德文版本EN 1366-4-2006+A1-2010

Fire resistance tests for service installations - Part 4: Linear joint seals; German version EN 1366-4:2006+A1:2010

DIN EN 15269-1:2010 门, 卷帘以及可开启窗口组件, 包括其建筑五金件的防火和/或防烟用试验结果的扩展应用. 第1部分: 一般要求. 德文版本EN 15269-1: 2010

Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements; German version EN 15269-1:2010

BS EN ISO 1182:2010 产品着火试验反应.不燃性试验

SAFETY PRECAUTIONS — The attention of all persons concerned with managing and carrying out this test is drawn to the fact that fire testing can be hazardous and that there is a possibility that toxic, harmful smoke and gases can be evolved during the test. Operational hazards can also arise during the testing of specimens and the disposal of test residues. An assessment of all potential hazards and risks to health should be made and safety precautions should be identified and provided. Written safety instructions should be issued. Appropriate training should be given to relevant personnel. Laboratory personnel should ensure that they follow written safety instructions at all times. This International Standard specifies a method of test for determining the non-combustibility performance, under specified conditions, of homogeneous products and substantial components of non-homogeneous products. Information on the precision of the test method is given in Annex A.

Reaction to fire tests for products - Non-combustibility test

BIP 2173-2010 BS 9999 手册.建筑物设计,管理和使用中的有效消防安全性

The BS 9999 Handbook - Effective Fire Safety in the Design, Management and Use of Buildings

BS EN 15269-1:2010 门,百叶窗和可开窗户配件的耐火和烟控测试结果的广泛应用,含其建筑五金器具的元件.一般要求

This European Standard sets out the general principles for the extended application of test results obtained on fire resisting and smoke control doorsets, i.e. the types of pedestrian and industrial doors and openable windows listed in the Introduction above when tested in accordance with EN 1634-1 and/or EN 1634-3. This document provides the general principles which are intended to be used in conjunction with the relevant part of EN 15269 depending upon the specific product type to be evaluated. The rules to evaluate the field of direct application of fire resisting or smoke control door, shutter and openable window assemblies are given in EN 1634-1 and EN 1634-3 respectively and are based on the results of a single test. These rules relate to the more common forms of product constructions for which experience of testing has provided the knowledge that such variations can be safely accepted. The extent of the permitted variations is generally conservative and is based on the minimum level of common agreement achieved. This European Standard identifies the principles to be followed during the preparation of the subsequent product related standards of the EN 15269 series which define the rules for the permitted variations of products from the tested specimen. These rules, which are created in a committee by agreed expert opinion based on experience of fire resistance testing and interpolation of test results, will form the basis of the field of extended application. When these rules are applied by a body suitably notified for the purpose, they will lead to a classification suitable for the application of a CE marking to the modified product.

Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - General requirements

DIN EN 15254-5:2010 耐火试验结果的扩展应用.非承重墙.第5部分:金属夹芯板结构.德文版本EN 15254-5-2009

This European Standard defines rules for extended applications, provides guidance, and, where appropriate, defines procedures, for variations of certain parameters and factors associated with the design of internal and external non-loadbearing walls constructed of metal sandwich panels and that have been tested in accordance with EN 1364-1.

Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction; German version EN 15254-5:2009

EN 1366-4:2006+A1:2010 建筑设施的耐火测试第4部分:线型密封件

This European Standard specifies a method for determining the fire resistance of linear joint seals based on their intended end use. This European Standard is used in conjunction with EN 1363-1. The following tests are included in this European Standard: no mechanically induced movement; mechanically induced movement, either prior to or during fire exposure. This European Standard does not provide quantitative information on the rate of leakage of smoke and/or hot gases, or on the transmission or generation of fumes. The load-bearing capacity of a linear joint seal is not addressed in this European Standard.

Fire resistance tests for service installations - Part 4: Linear joint seals

BS EN 15882-3:2009 服务设施用耐火性试验结果的扩展应用.渗透密封剂

The purpose of this European Standard is to provide the principles and guidance for the preparation of extended application documents for penetration sealing systems tested in accordance with EN 1366-3. The field of the extended application document is additional to the direct field of application given within EN 1366-3 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application. It should be noted that this European Standard provides general guidance on the likely effects of a change. It gives no guidance as to the magnitude, nor how this magnitude is evaluated. Composite pipes comprising both metallic and plastics components are not covered by this European Standard.

Extended applications of results from fire resistance tests for service installations - Penetration seals

BS EN 13238:2010 建筑产品着火试验的反应性.基衬底选择的调节程序和通则

This European Standard describes the conditioning procedures for test specimens which will be tested according to the European standards for reaction to fire. The rules for the selection of substrates for construction products when carrying out reaction to fire tests are also detailed in this European Standard.

Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates

DIN EN 13501-3:2010 施工产品和建筑部件的燃烧性能分类.第3部分:对建筑服务设施中使用的产品和部件的耐火试验数据进行分类:耐火管和防火挡板.德文版本EN 13501-3-2005+A1-2009

This European Standard specifies the procedure for classification of the resistance to fire performance of construction products and building elements used as components of building service installations.

Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers; German version EN 135