P20 工程结构综合 标准查询与下载

UNI 8219-1981 钢结构工件结构的技术图纸．顶楼平面图标记

La presente norma stabilisce, mediante convenzioni e segni grafici, le regole per la rappresentazione della vista dall'alto (pianta) di solai camminargli nelle strutture di carpenteria metallica.

Technical drawings for structural metal work. Representation of floor plans.

ISO 834:1975/Amd 2:1980 耐火试验.第2次修改

Fire-resistance test; elements of building construction; amendment 2

DIN 1080-4:1980 土木建筑工程用术语、符号和单位.混凝土结构、复合钢结构和混凝土中的钢大梁

Concepts, symbols and units for civil engineering; steel structures, composite structures and steelbeams in concrete

Terms, Symbols and Units Used in Civil Engineering; Concrete Construction, Composite Steel Construction and Steel Girders in Concrete

DIN 1080-3:1980 土木工程术语、符号和单位.混凝土和钢筋混凝土结构、预应力混凝土结构、砖石结构

Concepts, symbols and units for civil engineering; concrete structures and reinforced concrete structures, prestressed concrete structures, brickwork

Terms, Symbols and Units Used in Civil Engineering; Concrete Construction and Reinforced Concrete Construction, Prestressed Concrete Construction, Masonry Construction

DIN 1080-5:1980 土木工程术语、符号和单位.木结构

Concepts, symbols and units for civil engineering; timber structures

Terms, Symbols and Units Used in Civil Engineering; Timber Construction

DIN 1080-6:1980 土木工程术语、.符号和单位.土力学与基础工程

Concepts, symbols and units for civil engineering; soil mechanics and foundation engineering

Terms, Symbols and Units used in Civil Engineering; Soil Mechanics and Foundation Engineering

DIN 4019-1 Bb.1:1979 地基.垂直中心载荷的沉降分析.分析的说明和示例

Subsoil; analysis of settlements for vertical and centric loading, comment and examples of analysis

DIN 4019-1:1979 地基.垂直中心载荷的沉降计算

Subsoil; analysis of settlements for vertical and centric loadingDiese Norm entstand in mehrj?hrigen Beratungen eines gemeinsamen Ausschusses des Fachbereichs Baugrund des Normenausschusses Bauwesen im DIN Deutsches Institut für Normung e.V. und der Deut

Subsoil; Settlement Calculations for Perpendicular Central Loading

NF P06-004:1977 建筑设计基础.对于引力的恒荷载和工作荷载

BASES FOR DESIGN OF STRUCTURES. PERMANENT AND SERVICE LOADS DUE TO GRAVITY.

ISO 3766:1977 建筑和土木工程制图.混凝土钢筋的符号

Building and civil engineering drawings; Symbols for concrete reinforcement

DIN 1055-2:1976 建筑物的设计负荷.土壤特性值.比重、磨擦角、粘着力、墙壁摩擦角

Design loads for buildings; soil properties; unit weight, angel of friction, cohesion, wall frictionDiese Norm wurde in der Arbeitsgruppe Einheitliche Technische Baubestimmungen (ETB) des FNBau ausgearbeitet. Sie ist den obersten Bauaufsichtsbeh?rden vom

Design Loads for Buildings; Soil Characteristics; Specific Weight, Angle of Friction, Cohesion, Angle of Wall Friction

ISO 3447:1975 建筑接缝 接缝功能的一般检验项目

Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.

Joints in building; General check-list of joint functions

DIN 4018:1974 地基.扩展基础下承压力分布的计算

Subsoil; contact pressure distribution under raft foundations, analysisErl?uterungen und Berechnungsbeispiele zu dieser Norm sind in Vorbereitung; bis dahin siehe DIN-Taschenbuch 36Baunormen Baugrund, 1972, Seite 79 ff.In dieser Norm sind die von au?en

Subsoil; Calculation of the Bearing Pressure Distribution under Spread Foundations

ISO 2445:1972 建筑接缝 设计的基本原则

Outlines some basic principles for the design of joints in building. These principles fall under three main headings of properties: geometrical, structural and environmental properties of joints.

Joints in building; Fundamental principles for design

JGJ 6-1999（条文说明） 高层建筑箱形与筏形基础技术规范

Technical code for tall building box foundations and raft foundations of tall buildings (explanation)

JGJ 74-2003（条文说明） 建筑工程大模板技术规程

Technical specification for large-area formwork building construction(explanation)

JGJ 84-2000 建筑岩土工程勘察基本术语标准

Standard for basic terms of geotechnical engineering investigation of buildings

BS EN 60335-2-95:2001 家用和类似用途电器的安全.特殊要求.住宅用垂直移动汽车库门驱动装置的特殊要求

This clause of part 1 is replaced by: This standard deals with the safety of electric drives for garage doors for residential use which open and close in a vertical direction, the rated voltage of the drives being not more than 250 V for single-phase appliances and 480 V for other appliances. It also covers the hazards associated with the movement of these electrically driven garage doors. NOTE 1 - Examples of garage doors which open and close in a vertical direction are shown in figure 101. NOTE 2 - The drive may be supplied with a garage door. NOTE 3 - This standard also applies to entrapment protection devices for use with drives. NOTE 4 - This standard does not cover hazards related to the mechanisms of the door itself or to wicket doors. So far as is practicable, this standard deals with the common hazards presented by appliances which are encountered by all persons in and around the home. This standard does not in general take into account playing with the appliance by young children, but recognizes that children may be in the vicinity of the garage door. NOTE 5 - Attention is drawn to the fact that - for appliances intended to be used in tropical countries, special requirements may be necessary; - in many countries additional requirements are specified by the national authorities responsible for the protection of labour and similar authorities. NOTE 6 - This standard does not apply to - drives for garage doors for use by more than one household; -drives for garage doors higher than 3,5 m; - drives that are activated automatically; - drives for rolling shutters, awnings, blinds and similar equipment (IEC 60335-2-97); - drives for commercial and industrial purposes; - drives intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas).

Specification for safety of household and similar electrical appliances - Particular requirements - Particular requirements for drives for vertically moving garage doors for residential use

MT 30-1992 金属顶梁

本标准规定了金属顶梁(以下简称“顶梁”)的分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于煤矿回采工作面支护顶板用顶梁。

metal top beam

HB 0-45-1974 展开长度计算表

Expand Length Calculation Table