P26 金属结构工程 标准查询与下载

DIN EN 1999-1-4:2010 欧洲法规9.铝结构件的设计.第1-4部分:冷成型结构薄板

Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007 + AC:2009

DIN EN 1999-1-5:2010 欧洲法规9.铝结构件的设计.第1-5部分:壳层结构

Eurocode 9 - Design of aluminium structures - Part 1-5: Shell structures; German version EN 1999-1-5:2007 + AC:2009

JGJ 209-2010 轻型钢结构住宅技术规程

本规程适用于以轻型钢框架为结构体系,并配套有满足功能要求的轻质墙体、轻质楼板和轻质屋面建筑系统,层数不超过6层的非抗震设防以及抗震设防烈度为6~8度的轻型钢结构住宅的设计、施工及验收。

Technical specification for lightweight residential buildings of steel structure

NA to BS EN 1993-3-1-2006 欧洲法规3的英国国家附录.钢结构设计.塔台,柱杆和烟囱.塔台和柱杆

UK National Annex to Eurocode 3. Design of steel structures - Towers, masts and chimneys - Towers and masts

JGJ 107-2010 钢筋机械连接技术规程

本规程适用于房屋建筑与一般构筑物中各类钢筋机械连接接头(以下简称接头)的设计、应用与验收。

Technical specification for mechanical splicing of steel reinforcing bars

ANSI/SJI LH/DLH-2010 LH系列长跨度钢搁栅和DLH系列深长跨度钢搁栅标准规范

General Revision

Standard Specifications for Longspan Steel Joists, LH-Series, and Deep Longspan Steel Joists, DLH-Series

ANSI/AISC 360-2010 结构钢建筑物的规范

This Specification provides criteria for the design, fabrication, and erection of structural steel buildings and other structures, where other structures are defined as those structures designed, fabricated, and erected in a manner similar to buildings, with building-like vertical and lateral load resisting elements.

Specification for Structural Steel Buildings

ANSI/AISI S100-07/S 2-2010 冷带钢结构构件设计用北美规范的补充件2.2007版本

Provide supplemental information to AISI S100-07 for determining member and connection strengths of cold-formed carbon and low-alloy steels. Provide supplemental information for determining resistance factors of cold-formed carbon and low alloy steel members and connections via tests. This Supplement 2 to AISI S100-07 replaces Supplement 1 to AISI S100-07 (AISI S100-07/S1-09) and is applicable to the United States, Canada, and Mexico.

Supplement 2 to the North American Specification for the Design of Cold-Formed Steel Structural Members, 2007 Edition

ANSI/SJI K-2010 空腹钢搁栅标准规范,K系列

General Revision

Standard Specifications for Open Web Steel Joists, K-Series

BS PD 6705-3:2009 钢和铝结构使用.第3部分:要求符合BS EN 1090-3的铝结构实施建议

This part of PD 6705 gives guidance on the use of BS EN 1090‑3 for the execution of aluminium structures designed to BS EN 1999. It is applicable to the same scope of application as in BS EN 1090‑3, unless otherwise stated. The specification information included in this document is applicable only when the design guidance in PD 6702‑1 has been followed.

Structural use of steel and aluminium - Part 3: Recommendations for the execution of aluminium structures to BS EN 1090-3

BS PD 6702-1:2009 铝的结构应用.第1部分:关于依照BS EN 1999进行铝结构设计的建议

This part of PD 6702 gives guidance on the use of the following parts of BS EN 1999, Design of aluminium structures: • Part 1‑1, General structural rules; • Part 1‑3, Structures susceptible to fatigue. It is applicable to the same scope of application as BS EN 1999 unless otherwise stated. The design information included in this document is applicable only when the recommendations in PD 6705-3 are followed for the execution of the structure. NOTE This document covers those items identified in the UK National Annexes to BS EN 1999‑1‑1 and BS EN 1999‑1-3 as requiring additional guidance. Further material, not necessarily identified in the relevant National Annex, is also given for information.

Structural use of aluminium - Part 1: Recommendations for the design of aluminium structures to BS EN 1999

EN 16031:2009 望远镜可调节铝支柱.产品规范,通过计算和试验进行设计及评定

Adjustable telescopic aluminium props - Product specifications, design and assessment by calculation and tests

DIN EN 1993-1-12 Berichtigung 1:2009 欧洲法规3:钢结构的设计.第1-12部分:扩充EN 1993钢等级＜S700的附加规则.技术勘误DIN EN 1993-1-12-2007

Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S 700; German version EN 1993-1-12:2007, Corrigendum to DIN EN 1993-1-12:2007-07; German version EN 1993-1-12:2007/AC:2009

DIN EN 1993-1-8 Berichtigung 1:2009 欧洲代码3:钢结构的设计.第1-8部分:连接点的设计,德文版本EN 1993-1-8:2005,勘误表DIN EN 1993-1-8:2005-07

Eurocode 3: Design of steel structures - Part 1-8: Design of joints; German version EN 1993-1-8:2005, Corrigendum to DIN EN 1993-1-8:2005-07; German version EN 1993-1-8:2005/AC:2009

DIN EN 1993-1-7 Berichtigung 1:2009 欧洲法规3:钢结构的设计.第1-7部分:受平面承载以外的电镀结构.技术勘误DIN EN 1993-1-7-2007

Eurocode 3: Design of steel structures - Part 1-7: Plated structures subject to out of plane loading; German version EN 1993-1-7:2007, Corrigendum to DIN EN 1993-1-7:2007-07; German version EN 1993-1-7:2007/AC:2009

DIN EN 1993-2 Berichtigung 1:2009 欧洲统一规范3:钢结构的设计.第2部分:钢梁桥,德文版本EN 1993-2:2006,德文版本EN 1993-2:2007,DIN EN 1993-02:2007-02的勘误表,德文版本EN 1993-2:2006/AC:2009

Eurocode 3: Design of steel structures - Part 2: Steel Bridges; German version EN 1993-2:2006, German version EN 1993-2:2007, Corrigendum to DIN EN 1993-02:2007-02; German version EN 1993-2:2006/AC:2009

DIN EN 1993-1-9 Berichtigung 1:2009 欧洲法规3:钢结构的设计.第1-9部分:疲劳度.德文版本EN 1993-1-9-2005,DIN EN 1993-1-9-2005的技术勘误.德文版本EN 1993-1-9-2005/AC-2009

Eurocode 3: Design of steel structures - Part 1-9: Fatigue; German version EN 1993-1-9:2005, Corrigendum to DIN EN 1993-1-9:2005-07; German version EN 1993-1-9:2005/AC:2009

DIN EN 1993-5 Berichtigung 1:2009 欧洲法规3:钢结构的设计.第5部分:打桩工程.技术勘误DIN EN 1993-5-2007

Eurocode 3: Design of steel structures - Part 5: Piling; German version EN 1993-5:2007, Corrigendum to DIN EN 1993-5:2007-07; German version EN 1993-5:2007/AC:2009

NA to BS EN 1993-6-2007 欧洲规范3的英国国家附件.钢结构的设计.起重机支撑结构

This National Annex gives: a) the UK decisions for the National Determined Parameters described in the following subclauses of BS EN 1993-6:2007: • 2.1.3.2(1)P • 3.6.3(1) • 9.1(2) • 2.8(2)P • 6.1(1) • 9.2(1)P • 3.2.3(1) • 6.3.2.3(1) • 9.2(2)P • 3.2.3(2)P • 7.3(1) • 9.3.3(1) • 3.2.4(1), Table 3.2 • 7.5(1) • 9.4.2(5) • 3.6.2(1) • 8.2(4) b) the UK decision on the status of BS EN 1993-6:2007 informative Annex A; c) references to non-contradictory complementary information.

UK National Annex to Eurocode 3. Design of steel structures - Crane supporting structures

DIN EN 1993-1-3 Berichtigung 1:2009 欧洲法规3:钢结构的设计.第1-3部分:一般规则.冷成型模和薄板材用补充规则.技术勘误DIN EN 1993-1-3-2007

Eurocode 3: Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting; German version EN 1993-1-3:2006, Corrigendum to DIN EN 1993-1-3:2007-02, German version EN 1993-1-3:2006/AC:2009