P26 金属结构工程 标准查询与下载



共找到 507 条与 金属结构工程 相关的标准,共 34

Supplement 1 to the North American Standard for Cold-Formed Steel Framing - Wall Stud Design

ICS
91.080.10
CCS
P26
发布
2012
实施

North American Standard for Cold-Formed Steel Framing - Truss Design

ICS
77.140.01
CCS
P26
发布
2012
实施

North American Standard for Cold-Formed Steel Framing - General Provisions

ICS
91.080.10
CCS
P26
发布
2012
实施

Entertainment Technology - Design, Manufacture and Use of Aluminum Trusses and Towers

ICS
97.200.10
CCS
P26
发布
2012
实施

North American Specification for the Design of Cold-Formed Steel Structural Members

ICS
91.080.10
CCS
P26
发布
2012
实施

本标准规定了废物箱的术语和定义、分类、型号编制、要求、试验方法、检验规则、标志、包装和运输、贮存等。 本标准适用于废物箱的生产、使用和检验。

General technical specifications for waste bin

ICS
13.030.50
CCS
P26
发布
2011-11-25
实施
2012-05-01

Eurocode 9: Design of aluminium structures - Part 1-3: Structures susceptible to fatigue; German version EN 1999-1-3:2007 + A1:2011

ICS
91.010.30;91.080.10
CCS
P26
发布
2011-11
实施

This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics. This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures. The components can be used directly or in construction works or as structural components in the form of kits. This European Standard applies to series and non-series structural components including kits. The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e. g. anodising of aluminium. This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4. This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems. NOTE For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.

Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components

ICS
91.080.10
CCS
P26
发布
2011-11
实施

Eurocode 9: Design of aluminium structures - Part 1-4: Cold-formed structural sheeting; German version EN 1999-1-4:2007/A1:2011

ICS
91.010.30;91.080.10
CCS
P26
发布
2011-11
实施

Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures.

ICS
91.080.10
CCS
P26
发布
2011-10-01
实施
2011-10-21

Execution of steel structures and aluminium structures - Part 2 : technical requirements for steel structures.

ICS
91.080.10
CCS
P26
发布
2011-10-01
实施

Technical specifications for high-strength bolted connections of steel structures

ICS
CCS
P26
发布
2011-10-01
实施
2011-10-01

Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures; German version EN 1090-2:2008+A1:2011

ICS
91.080.10
CCS
P26
发布
2011-10
实施

Application technical specification for corrugated web steel structure

ICS
CCS
P26
发布
2011-09-01
实施
2011-09-01

本标准规定了轻钢结构拆装式活动板房(以下简称“活动板房”)的术语和定义、分类与基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以轻钢结构为承重结构,由彩钢夹芯板或玻镁平板等作为围护结构的拆装式临时用房,使用年限一般不超过五年。

Light steel structure disassembled prefabricated house

ICS
91.080.10
CCS
P26
发布
2011-08-22
实施
2011-11-15

National Annex - Nationally determined parameters - Eurocode 3: Design of steel structures - Part 1-12: Additional rules for the extention of EN 1993 up to steel grades S700

ICS
91.010.30;91.080.10
CCS
P26
发布
2011-08
实施

本规程适用于大气环境中的新建建筑钢结构的防腐蚀设计、施工、验收和维护。

Technical specification for anticorrosion of building steel structure

ICS
CCS
P26
发布
2011-07-13
实施
2012-03-01

本标准规定了建筑工程用索(以下简称拉索)的术语和符号、分类、代号与标记、一般要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于建筑工程各类结构用索。

Cable for building engineering

ICS
91.080.10
CCS
P26
发布
2011-07-13
实施
2012-02-01

本规程适用于工业与民用建筑和构筑物中拱形钢结构的设计、制作、安装及验收。

Technical specification for steel arch structure

ICS
CCS
P26
发布
2011-07-04
实施
2012-05-01

本标准规定了水工金属结构技术术语及其基本定义。 本标准适用于水利水电工程闸门、阀门、拦污栅、压力钢管、启闭机和清污机等水工金属结构的设计、制作、安装及检验等。

Terms of hydro steel structure

ICS
91.080.10
CCS
P26
发布
2011-06-01
实施
2011-09-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号