P40 给水、排水工程综合 标准查询与下载

HG/T 20572-2007 化工企业给排水设计施工图内容深度统一规定

本规定动作的有关内容和深度，适用于传统设计体制。

Rules of content depth for design of construction drawing of water supply and drainage in chemical industry

ASTM C1479-07a 使用标准设备安装预制混凝土污水管、雨水管和排水管的标准实施规范

This practice is useful as a reference by an owner and the owner''s engineer in preparing project specifications.1.1 This practice covers the installation of precast concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construction of culverts. 1.2 A complete metric companion to this practice has been developed—C 1479M; therefore, no metric equivalents are presented in this practice. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

ASTM C1479-07 使用标准设备安装预制混凝土污水管、雨水管和排水管的标准实施规范

This practice is useful as a reference by an owner and the ownerrsquo;engineer in preparing project specifications.1.1 This practice covers the installation of precast concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water and for the construction of culverts.1.2 A complete metric companion to this practice has been developed8212;C 1479M; therefore, no metric equivalents are presented in this practice.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

ASTM C1479M-07a 使用标准设备(米制的)安装预制混凝土污水管、雨水管和排水管的标准实施规程

This practice is useful as a reference by an owner and the owner''s engineer in preparing project specifications.1.1 This practice covers the installation of precast concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts. 1.2 This specification is the metric counterpart of Specification C 1479. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

ASTM C1479M-07 使用标准设备(米制的)安装预制混凝土污水管、雨水管和排水管的标准实施规程

1.1 This practice covers the installation of precast concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts.1.2 This specification is the metric counterpart of Specification C 1479.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

DB11/T 348-2006 建筑中水运行管理规范

本标准规定了建筑中水系统运行管理及工艺设施维护。本标准适用于建筑中水系统及建筑物或小区内的城市再生水利用系统的运行管理。

Code for operation and management of building reclaimed water system

DB11/T 341-2006 村镇供水工程自动控制系统设计规范

本标准规定了村镇供水工程自动控制系统设计的术语和定义、计算机监控系统设计、过程检测仪表设置和设计文件组成等。 本标准适用于北京市辖区内村镇供水工程自动控制系统的设计。

Design specification for automatic control system of rural water supply

DB11/T 340-2006 自备井水表安装使用规程

本规程规定了自备井水表的术语和定义、通用技术与水表选型、水表的安装及水表的使用与维护保养。本规程适用于城镇自备井公称口径为50mm～200mm的冷水水表的安装使用。集中供水厂的水表安装可参照执行。

Code of Practice for Installation and Maintenance of Water Meter for Self-sufficient Well

DB13(J) 56-2005 市政给水管道工程施工质量验收规程

本规程是根据河北省建设厅关于印发《2005年度省工程建设 标准和标准设计第一批编制计划》(冀建质[2005]154号)的通 知，由唐山市建设工程质量监督检测站编制完成的。 本规程在编制过程中，编制组进行了广泛的调查研究，总结 了河北省市政基础设施工程施工质量验收的实践经验，坚持了 “验评分离、强化验收、完善手段、过程控制”的指导思想，经河 北省建设厅组织审查定稿。 本规程主要包括总则、术语、基本规定、施工测量、土石方、 给水管道安装、钢管防腐、管道支墩、强度及严密性试验、井室、 附件安装、冲洗消毒等工程的施工质量验收的主要内容。另附3个 附录，主要是施工现场质量检查和验收时经常用到的检验方法、 验收表格等内容。 本规程必须与《市政基础设施工程施工质量验收统一标准》 (DBI3(J)53-2005)和《市政基础设施工程施工质量验收通用 规程》(DB13(J)54-2005)配合使用。本规程适用于河北省辖区内的新建、改建、扩建的市政给 水管道工程。有特殊要求的市政给水管道工程，除特殊要求部分 外，仍应按本规程执行。

Regulations for acceptance of construction quality of municipal water supply pipeline engineering

CECS 209-2006 曝气生物流化池设计规程

本规程适用于新建、扩建、改建的中、小规模城镇污水处理和水质类似的工业废水处理。也适用于含有高浓度凯氏氮废水的硝化处理。

Specification for design of aeration biological fluidized tank

CECS 205-2006 给水内衬不锈钢复合钢管管道工程技术规程

本规程适用于新建、改建和扩建的民用和工业建筑中内水压力不大于2.0Mpa，管径不大于500mm的输送冷热水、饮用净水、消防给水系统等给水压力管道工程的设计、施工及验收。 室外架空和埋地的给水压力管道工程，在采用相应的保温绝缘和防腐蚀措施后，亦可按相应架空管道、埋地管道等技术标准的要求参照采用本规程。

Technical specification for stainless steel lined composite steel pipeline engineering of water supply

AS/NZS 3500.2/AMD 2:2006 给排水.第2部分:卫生设备给排水.修改件2

The 2003 edition of AS/NZS 3500.2 is amended as follow; the amendment(s) should be inserted in the appropriate place(s).

Plumbing and drainage Part 2:Sanitary plumbing and drainage; Amendment No.2

CECS 193-2005 城镇供水长距离输水管(渠)道工程技术规程

本规程适用于城镇和工矿企业输送原水、清水管(渠)道工程的设计及运行管理。

Technical specification for long distance water transmission pipeline engineering of urban water supply

DIN EN 14654-1:2005 排水沟和下水道清洁工作的管理和控制.第1部分:下水道清洁.德文版本 EN 14654-1-2005

This European Standard specifies the general principles for the management and control of cleaning operations in drain and sewer systems and specifies requirements for implementation of cleaning programmes and for working practices. It is applicable to drain and sewers systems outside buildings, which operate essentially under gravity, from the point where the sewage leaves a building or roof drainage system, or enters a road gully, to the point where it is discharged into a treatment works or receiving water. Drains and sewers below buildings are included provided that they do not form part of the drainage system of the building.

Management and control of cleaning operations in drains and sewers - Part 1: Sewer cleaning; English version of DIN EN 14654-1:2005

CECS 190-2005 给水排水工程埋地玻璃纤维增强塑料夹砂管管道结构设计规程

本规程适用于城镇公用设施和工业企业一般给水排水工程中，输送介质温度低于40℃的采用人工土弧基础的埋地玻璃纤维增强塑料夹砂管管道结构的设计。 本规程不适用于工业企业中有特殊要求的给水排水工程管道的结构设计。 给水排水工程埋地玻璃纤维增强塑料管管道结构的设计可参照本规程执行。

Specification for structural design of buried glass fiber reinforced plastic mortar pipeline of water supply and sewerage engineering

NF P41-036-2:2005 材料对人类用水的影响.由迁移造成的影响.第2部分:非金属无粘性的现场使用材料的试验方法

Influence of materials on water intended for human consumption - Influence due to migration - Part 2 : test method for non-metallic and non-cementitious site-applied materials.

CJ/T 43-2005 水处理用滤料

本标准规定了水处理用滤料的技术要求、检验方法、铺装方法等。 本标准适用于生活饮用水过滤用无烟煤滤料、石英砂滤料、高密度矿石滤料、砾石承托料和高密度矿石承托料。 用于工业用水过滤的这三种滤料和两种承托料可参照执行。

Filter material for water treatment

CJ/T 206-2005 城市供水水质标准

本标准规定了供水水质要求、水源水质要求、水质检验和监测、水质安全规定。 本标准适用于城市公共集中式供水、自建设施供水和二次供水。 城市公共集中式供水企业、自建设施供水和二次供水单位，在其供水和管理范围内的供水水质应达到本标准规定的水质要求。用户受水点的水质也应符合本标准规定的水质要求。

Water quality standards for urban water supply

DIN 1988-7:2004 钢管和圆钢棒制作套筒螺母

The standard describes the measures to take for construction and operation of drinking water installations to keep down the rate of corrosion of the materials and the calcareous deposit.

Turnbuckles made from steel tubes or round steel bars

CECS 172-2004（条文说明） 排水系统水封保护设计规程

Specification for design of water-seal protection in drainage systems