P45 供热、供气、空调及制冷工程综合 标准查询与下载

ANSI/ASHRAE 130-2008 空气终端装置的测试方法

This proposed revision of the standard includes updates and revisions to all parts of the standard, including its title, purpose, and scope. It updates definitions, adds modulating diffusers, redefines airflow sensor performance testing, and adds a method to determine the power factor. New appendices contain some material that was formerly in the body of the standard and some new reference material.

Methods of Testing Air Terminal Units

CSA C22.2 No.117-1970 UPD 2-2007 独立空调

Les modifications suivantes visant les articles 4.2.1.6, 4.2.2.4 et 6.19 et la figure 1 ont été approuvées.

Climatiseurs individuels

BS EN 13053:2006 建筑物通风设备.通风装置.装置、组件和零件的额定值和性能

This European Standard specifies requirements and testing for ratings and performance of air handling units as a whole. It also specifies requirements, recommendations, classification, and testing of specific components and sections of air handling units. For many components and sections it refers to component standards, but it also specifies restrictions or applications of standards developed for stand alone components. This standard is applicable both to standardised designs, which may be in a range of sizes having common construction concepts, and also to custom-design units. It also applies both to air handling units, which are completely prefabricated, and to units which are built up on site. Generally the units within the scope of this standard include at least a fan, a heat exchanger and an air filter. This standard is not applicable to the following: a) air conditioning units serving a limited area in a building, such as fan coil units; b) units for residential buildings; c) units producing ventilation air mainly for a manufacturing process.

Ventilation for buildings - Air handling units - Rating and performance for units, components and sections

NF P52-002/A1:2006 散热器恒温阀.要求和试验方法

Thermostatic radiator valves - Requirements and test methods.

CSA C22.2 No.117-1970 UPD 1-2005 独立空调

Climatiseurs individuels

Climatiseurs individuels

CECS 186-2005 多边形稀油密封储气柜工程施工质量验收规程

本规程主要适用于城市煤气和冶金行业多边形储气柜本体工程的施工质量验收。其他行业同型储气柜的施工质量验收可参照采用。

Specification for construction quality acceptance of polygon oil seal gasholder

ASHRAE 72-2005 商用冰箱及冰柜的试验方法

Method of Testing Commercial Refrigerators and Freezers Supersedes ANSI/ASHRAE Standards 72-1998 and 117-2002; Errata: 01/17/2006; Interpretation: 10/04/2006 [Superseded: ASHRAE 117, ASHRAE 117]

Method of Testing Commercial Refrigerators and Freezers [Superseded: ASHRAE 117, ASHRAE 117]

CJJ 33-2005 城镇燃气输配工程施工及验收规范

本规范适用于城镇燃气设计压力不大于4.0MPa的新建、改建和扩建输配工程的施工及验收。

Code for construction and acceptance of city and town gas distribution works

JIS B 8224:2005 锅炉给水及锅炉水.试验方法

この規格は，ボイラの給水(以下，給水という。)，ボイラ水及び蒸気の試験方法について規定する。

Boiler feed water and boiler water -- Testing methods

ASHRAE OR-05-8-2005 在室内空调器分布上的创新和进步的研讨会,第2部分:数值,实验和应用的文章

Symposium on Innovations and Advances in Room Air Distrbution, Part 2: Numerical, Experimental, and Application Articles

Symposium on Innovations and Advances in Room Air Distrbution, Part 2: Numerical, Experimental, and Application Articles

DIN 4710:2003 德国采暖和空气调节设备能量需求计算的气象数据统计

Statistics on German meteorological data for calculating the energy requirements for heating and air conditioning equipment

SB/T 10354-2002 制冷系统和热泵-系统流程图和管路仪表图-绘图与符号

本标准为制冷系统和热泵的系统流程图和管路仪表图规定了符号和绘图规则。这些图形不仅说明制冷系统的构造和功能．而且成为制冷系统设计、制作、安装、投产．运行、维护和停产所必需的全部技术文件的一部分。 本标准不适用于电热制冷系统．如帕尔贴效应。

Refrigerating systems and heat pumps-System flow diagrams and piping instrument diagrams Layout and symbols

BS EN 12170:2002 建筑物的供热系统.操作、维护和使用文件的制定程序.供热系统要求经培训的操作人员

This European Standard specifies requirements for providing documents for the operation, maintenance and use of heating systems in buildings requiring a trained operator. Parts of heating systems covered by this standard are: - boilers or heat supply equipment, including control; - safety arrangements, including air supply; - district heating heat exchangers, heat meters and primary domestic hot water production facilities; - energy sources, storage and supply; - flue gas systems, including condensate treatment and disposal; - heat distribution network, including associated components; - heat emitters, including accessories; - systems for control and supervision; - water treatments and procedures (e.g. chemical and physical, including antifreeze).

Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator

SY/T 0518-2002 油气管道钢制对焊管件设计规程

本标准规定了油气管道钢制对焊管件的设计及选用验算的要求和方法。管件设计计算时，只考虑设计压力的作用。当必须考虑其他载荷(如热膨胀推力、弯曲力矩等)时，应另行分析，不属于本标准的范围。 本标准适用于下列条件的陆上油、气输送管道工程中的钢制对焊管件(管封头、异径接头、弯头、弯管和三通)； 设计压力 p不大于10MPa； 公称直径DN不大于1000mm； 设计温度T高于-40℃，且不高于120℃；

Specification for design of steel buttwelding fittings for oil & gas pipeline

BS EN 378-2:2000 制冷系统和加热泵规范.安全性和环境要求.设计、制造、试验、标记和文献

1 The scope of EN 378-1 is applicable. 2 This Part 2 of the European Standard is applicable to the design and construction of refrigerating systems and the components and materials used including piping. It also specifies requirements for testing, commissioning, marking and documentation. NOTE: The classification of refrigerants as defined in Directive 97/23/EC and the associated technical requirements of pressure equipment are listed in the European standard on "Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements" which is in preparation, see informative annex E. 3 Certain clauses and sub-clauses of this Part 2 are not applicable to unit systems and self-contained systems which operate with charges of refrigerant up to: 10,0 kg of group L1 refrigerant; 2,5 kg of group L2 refrigerant;and 1,0 kg of group L3 refrigerant. These clauses and sub-clauses are: 5.2; clause 6; 7.4.3.1; 7.4.3.3; 7.5; 9.1.1; 9.1.2; 9.2; 9.3; 9.4.3.3; 9.4.3.4; 9.4.3.5; 9.5.1; 9.5.2; 9.5.3; 9.5.6; 10.1.2; 10.3; 10.5; 10.6. NOTE: Other clauses and sub-clauses may or may not apply, but in each case consideration of the system details in conjunction with the text will make it clear whether they apply or not. 4 Some clauses and sub-clauses are not applicable to systems built on site with refrigerant charges up to: 2,5 kg of group L1 refrigerant; 1,5 kg of group L2 refrigerant;and 1,0 kg of group L3 refrigerant. These clauses are: 6.5.2.2 and clause 11. 5 Some unit systems and self-contained systems have maximum allowable pressures separately specified for the high and low pressure sides. In such cases, if it is not possible to separate the high and low pressure sides after the unit has been assembled, any further testing of the system can be carried out at pressures not more than the allowable pressure of the low pressure side. For particular classes or types of appliances in quantity production certain tests included in this Part 2 of the European Standard can be specified as type tests only.

Specification for refrigerating systems and heat pumps - Safety and environmental requirements - Design, construction, testing, marking and documentation

CJJ/T 88-2000 城镇供热系统安全运行技术规程

Technical specification for safety operation of heating system in city

CJJ 12-1999 家用燃气燃烧器具安装及验收规程

Specification for installation and acceptance of domestic gas burning appliances

CJJ/T 81-1998 城镇直埋供热管道工程技术规程

Technical specification for directly buried heating pipeline engineering in city and town

ARI 910-1999 室内池减湿器

This standard applies only to electrically-driven, mechanical compression type systems.

Indoor Pool Dehumidifiers

HG/T 20656-1998 化工采暖通风与空气调节详细设计内容和深度的规定

Specification of Contents and Procedure on Heating , Ventilating and Air Conditioning Detailed Design for Chemical Plant