P46 供热、采暖工程 标准查询与下载

BS EN 15316-4-1:2008 建筑物的加热系统.系统能量要求和系统效率的计算方法.空间发热系统、燃烧系统(锅炉)

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Space heating generation systems, combustion systems (boilers)

NF P52-617-3-1:2008 建筑物供热系统.系统能量要求和系统效率的计算方法.第3-1部分:家用热水系统要求的特性(出渣要求)

Heating systems in buldings - Method for calculation of system energy requirements and system efficiencies - Part 3-1 : domestic hot water systems, characterisation of needs (tapping requirements).

DIN EN 15378:2008 建筑物供热系统.锅炉和供热系统的检验

Heating systems in buildings - Inspection of boilers and heating systems; German version EN 15378:2007

NF P52-617-2-1:2008 建筑物供暖系统.系统能量要求和系统功效的计算方法.第2-1部分:空间加热排放系统.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1 : space heating emission systems.

DIN 18160-5:2008 烟囱.第5部分:烟囱清扫工具.要求、计划与制造

Chimneys - Part 5: Appliances for chimney-sweep work - Requirements, planning and constructions

BS EN 15378:2007 建筑物供热系统.锅炉和供热系统的检验

This European Standard specifies inspection procedures and optional measurement methods for the assessment of energy performance of existing boilers and heating systems. Boiler types covered by this European Standard are:  boilers for heating, domestic hot water or both;  gas, liquid or solid fuel fired boilers. Parts of heating systems covered by this European Standard are:  boilers, including generation control;  other generation devices;  domestic hot water production facilities;  heating distribution network, including associated components and controls;  heat emitters, including components and controls;  space heating control system;  storage and associated components;  domestic hot water control system. This standard covers issues related to energy conservation and environmental performance.

Heating systems in buildings — Inspection of boilers and heating systems

JG/T 232-2008 卫浴型散热器

Bathroom radiator

DIN EN 15316-3-3:2007 建筑物供暖系统.系统能量要求和系统功效的计算方法.第3-3部分:家用热水器系统

This European Standard is part of a set of standards covering the methods for calculation of system energy requirements and system efficiencies of heating systems in buildings. In particular this standard is one of a number of standards dealing with domestic hot water systems. The scope of this specific part is to standardise the methods for calculation of: -- thermal losses from the domestic hot water generation system; -- recoverable thermal losses for space heating from the domestic hot water generation system; -- auxiliary energy of the domestic hot water generation systems. These values are input data for calculation of the overall energy use according to prEN 15603 and EN 15316-1. This European Standard specifies the: -- inputs; -- calculation methods; -- outputs.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-3: Domestic hot water systems, generation; English version of DIN EN 15316-3-3:2007-12

DIN EN 15377-3:2007 建筑物供暖系统.内部水基表面加热和冷却系统的设计.第3部分:再生能源的使用优化

This document is applicable to water based surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. The methods do not apply to heated or chilled ceiling panels or beams. This standard is part 3 of a series of standards: -- Part 1: Determination of the design heating and cooling capacity; -- Part 2: Design, dimensioning and installation; -- Part 3:Optimizing for use of renewable energy sources. The aim of the present standard is to give a guide for the design to promote the use of renewable energy sources and to provide a method for the use of Thermo-Active-Building-Systems (TABS). The method allows calculation of peak cooling capacity of a thermo-active system, based on heat gains (solar, internal loads, ventilation). This method also allows calculation of the energy demand on the water side (system) to be used for sizing of the cooling system, e.g. chiller, fluid flow rate. Steady state heating capacity is calculated according to method B or E of prEN 15377-1 (part 1 of this series of standards).

Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Part 3: Optimizing for use of renewable energy sources; English version of DIN EN 15377-3:2007-12

DIN EN 15316-3-1:2007 建筑物供暖系统.系统能量要求和系统功效的计算方法.第3-1部分:家用热水系统需求特征(出水要求)

This European Standard is part of a set of standards covering methods for calculation of system energy requirements and system efficiencies of heating systems in buildings. In particular this European Standard is one of a number of standards dealing with domestic hot water systems. The scope of this specific part is to standardise the methods for determining the energy needs for domestic hot water. This European Standard covers the domestic hot water needs in buildings. The calculation of the energy needs for domestic hot water applies to a dwelling, a building or a zone of a building. In order to be coherent with calculation methods for space heating systems, emission losses representing taps and control should be taken into account.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 3-1: Domestic hot water systems, characterisation of needs (tapping requirements); English version of DIN EN 15316-3-1:2007-12

DIN EN 15450:2007 建筑物加热系统.热泵加热系统的设计

This standard specifies design criteria for heating systems in buildings using electrically driven heat pumps alone or in combination with other heat generators. Heat pump systems considered include (see Table 1 ): -- water- water; -- water- air; -- brine- water; -- refrigerant - water (direct expansion systems); -- refrigerant- refrigerant; -- air- air; -- air- water. This standard takes into account the heating requirements of attached systems (e.g. domestic hot water) in the design of heat supply, but does not cover the design of these systems. This standard covers only the aspects dealing with the heat pump, the interface with the heat distribution system and heat emission system (e.g. buffering system), the control of the whole system and the aspects dealing with energy source of the system. Systems designed primarily for cooling and systems which can operate simultaneously in cooling and heating mode are not within the scope of this standard. Table I -- Heat pump systems (within the scope)

Heating systems in buildings - Design of heat pump heating systems; English version of DIN EN 15450:2007-12

BS EN 15316-4-5:2007 建筑物供暖系统.系统能量要求和系统功效的计算方法.对流式供暖系统和区域供暖及大型容积系统的性能和质量

This European Standard is part of a set of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardise the method of assessing the energy performance of district heating and cooling systems and to define:  system borders;  required inputs;  calculation method;  resulting outputs. The method applies to district heating and cooling systems and any other kind of combined production for space heating and/or cooling and/or domestic hot water purposes. Primary energy savings and CO2 savings, which can be achieved by district heating systems compared to other systems, are calculated according to prEN 15603.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Space heating generation systems, the performance and quality of district heating and large volume systems

BS EN 15377-3:2007 建筑物供暖系统.内部水基表面加热和冷却系统的设计.再生能源的使用优化

This document is applicable to water based surface heating and cooling systems in residential, commercial and industrial buildings. The methods apply to systems integrated into the wall, floor or ceiling construction without any open air gaps. The methods do not apply to heated or chilled ceiling panels or beams. This standard is part 3 of a series of standards:  Part 1: Determination of the design heating and cooling capacity;  Part 2: Design, dimensioning and installation;  Part 3:Optimizing for use of renewable energy sources. The aim of the present standard is to give a guide for the design to promote the use of renewable energy sources and to provide a method for the use of Thermo-Active-Building-Systems (TABS). The method allows calculation of peak cooling capacity of a thermo-active system, based on heat gains (solar, internal loads, ventilation). This method also allows calculation of the energy demand on the water side (system) to be used for sizing of the cooling system, e.g. chiller, fluid flow rate. Steady state heating capacity is calculated according to method B or E of prEN 15377-1 (part 1 of this series of standards).

Heating systems in buildings - Design of embedded water based surface heating and cooling systems - Optimizing for use of renewable energy sources

DIN EN 15316-4-6:2007 建筑物供热系统.系统能量要求和系统功效的计算方法.第4-6部分:发热系统和光电系统

This European Standard is part of a set of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardise for photovoltaic systems: -- required inputs; -- calculation method; -- resulting outputs. The calculation method applies only to building integrated photovoltaic systems. The calculation method does not take into account: -- electrical storage; -- PV/thermal photovoltaic systems. The calculation method describes how to calculate the electricity production of photovoltaic systems. Primary energy savings and CO2 savings, which can be achieved by photovoltaic systems compared to other systems, are calculated according to prEN 15603. Standards linked to photovoltaic systems are listed in Annex A.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-6: Heat generation systems, photovoltaic systems; German version EN 15316-4-6:2007

DIN EN 15316-4-4:2007 建筑物供热系统.系统能量要求和系统功效的计算方法.第4-4部分:发热系统和建筑综合同时发热发电系统

This European Standard defines a method for calculation of the energy requirements, electricity production, thermal output and recoverable losses of building-integrated cogeneration units forming part of a heat generation system (space heating and domestic hot water) in a building. Such units are commonly known as micro- or small scale cogeneration, or micro- or small scale CHP. The calculation is based on the performance characteristics of the units, defined in product standards, and on other characteristics required to evaluate the performance of the units as included in the technical building system. The test of building-integrated cogeneration units for heating systems may be worked out in a national annex. As soon as European test methods are available these should be used. NOTE Primary energy savings and CO2 savings, which can be achieved by cogeneration units compared to separate production of heat and consumption of electricity, are calculated according to prEN 15603. Indications about the savings calculations are given in informative Annex C.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-4: Heat generation systems, building-integrated cogeneration systems; German version EN 15316-4-4:2007

DIN EN 15316-4-3:2007 建筑物供热系统.系统能量要求和系统功效的计算方法.第4-3部分:发热系统和热太阳能系统

This European Standard is part of a series of standards on the method for calculation of system energy requirements and system efficiencies. The framework for the calculation is described in prEN 15603. The scope of this specific part is to standardise the: -- required inputs, -- calculation method, -- required outputs, for thermal solar systems (including control) for space heating, domestic hot water production and the combination of both. The following typical thermal solar systems are considered: -- domestic hot water systems characterized by EN 12976 (factory made) or ENV 12977 (custom built); -- combisystems (for domestic hot water and space heating) characterized by ENV 12977 or the Direct Characterisation method developed in Task 26 'Solar Combisystems' of the lEA Solar Heating and Cooling programme; space heating systems characterized by ENV 12977.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-3: Heat generation systems, thermal solar systems; German version EN 15316-4-3:2007

DIN EN 15316-2-1:2007 建筑物供热系统.系统能量要求和系统功效的计算方法.第2-1部分:对流式供暖排放系统

The scope of this European Standard is to standardise the required inputs, the outputs and the links (structure) of the calculation method in order to achieve a common European calculation method. The energy performance may be assessed either by values of the heat emission system efficiency or by values of the increased space temperatures due to heat emission system inefficiencies. The method is based on an analysis of the following characteristics of a space heating emission system, including control: -- non-uniform space temperature distribution; -- heat emitters embedded in the building structure; -- control accuracy of the indoor temperature. The energy required by the emission system is calculated separately for thermal energy and electrical energy, in order to facilitate determination of the final energy and subsequently the corresponding primary energy according to other standards.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-1: Space heating emission systems; German version EN 15316-2-1:2007

DIN EN 15316-4-5:2007 建筑物供热系统.系统能量要求和系统功效的计算方法.第4-5部分:对流式供暖系统和区域供暖及大型容积系统的性能和质量

This European Standard is part of a set of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardise the method of assessing the energy performance of district heating and cooling systems and to define: -- system borders; -- required inputs; -- calculation method; -- resulting outputs. The method applies to district heating and cooling systems and any other kind of combined production for space heating and/or cooling and/or domestic hot water purposes. Primary energy savings and CO2 savings, which can be achieved by district heating systems compared to other systems, are calculated according to prEN 15603.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-5: Space heating generation systems, the performance and quality of district heating and large volume systems; German version EN 15316-4-5

DIN EN 15316-1:2007 建筑物供热系统.系统能量要求和系统功效的计算方法.第1部分:总论

This European Standard specifies the structure for calculation of energy use for space heating systems and domestic hot water systems in buildings. It standardises the required inputs and outputs for the calculations, in order to achieve a common European calculation method. The calculation method facilitates the energy analysis of the different sub-systems of the heating system, including control (emission, distribution, storage, generation), through determination of the system energy losses and the system performance factors. This performance analysis permits the comparison between sub-systems and makes it possible to monitor the impact of each sub-system on the energy performance of the building. Calculations of the system energy losses of each sub-system of the heating system are defined in subsequent standards (prEN 15316, parts 2-x, 3-x and 4-x). The system thermal losses, the recoverable system thermal losses and the auxiliary energy of the sub-systems of the heating system are summed up. The system thermal losses of the heating system contribute to the overall energy use in buildings (prEN 15603). Ventilation systems are not included in this European Standard (e.g. balanced systems with heat recovery), but if the air is preheated or an air heating system is installed, system energy losses of these systems are covered by ~. this European Standard.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General; German version EN 15316-1:2007

DIN EN 15316-2-3:2007 建筑物的供热系统.系统能量要求和系统功效的计算方法.第2-3部分:对流式供暖分配系统

This European Standard provides a methodology to calculate/estimate the system thermal loss of water based distribution systems for heating and the auxiliary energy demand, as well as the recoverable part of each. The actual recovered energy depends on the gain to loss ratio. Different levels of accuracy, corresponding to the needs of the user and the input data available at each design stage of the project, are provided in this European Standard by different calculation methods, i.e. a detailed calculation method, a simplified calculation method and a method based on tabulated values. The general method of calculation can be applied for any time-step (hour, day, month or year). Pipework lengths for the heating of decentralised, non-domestic ventilation systems equipment are to be calculated in the same way as for water based heating systems. For centralised, non-domestic ventilation systems equipment, the length is to be specified in accordance with its location. NOTE It is possible to calculate the system thermal loss and auxiliary energy demand for cooling systems with the same calculation methods as shown in this European Standard. Specifically, determination of auxiliary energy demand is based on the same assumptions for efficiency of pumps, because the efficiency curve applied is an approximation for inline and external motors. It needs to be decided by the standardisation group of CEN, whether or not the extension for cooling systems should be made in this European Standard. This is also valid for distribution systems in HVAC (in ducts) and also for special liquids.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 2-3: Space heating distribution systems; German version EN 15316-2-3:2007