P46 供热、采暖工程 标准查询与下载

BS EN 15316-4-4:2007 建筑物供暖系统.系统能量要求和系统功效的计算方法.供暖系统和建筑集成废热发电系统

This European Standard defines a method for calculation of the energy requirements, electricity production, thermal output and recoverable losses of building-integrated cogeneration units forming part of a heat generation system (space heating and domestic hot water) in a building. Such units are commonly known as micro- or small scale cogeneration, or micro- or small scale CHP. The calculation is based on the performance characteristics of the units, defined in product standards, and on other characteristics required to evaluate the performance of the units as included in the technical building system. The test of building-integrated cogeneration units for heating systems may be worked out in a national annex. As soon as European test methods are available these should be used. NOTE Primary energy savings and CO2 savings, which can be achieved by cogeneration units compared to separate production of heat and consumption of electricity, are calculated according to prEN 15603. Indications about the savings calculations are given in informative Annex C.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Heat generation systems, building-integrated cogeneration systems

BS EN 15316-4-6:2007 建筑物供暖系统.系统能量要求和系统功效的计算方法.热发生系统、光电系统

This European Standard is part of a set of standards on the method for calculation of system energy requirements and system efficiencies. The scope of this specific part is to standardise for photovoltaic systems:  required inputs;  calculation method;  resulting outputs. The calculation method applies only to building integrated photovoltaic systems. The calculation method does not take into account:  electrical storage;  PV/thermal photovoltaic systems. The calculation method describes how to calculate the electricity production of photovoltaic systems. Primary energy savings and CO2 savings, which can be achieved by photovoltaic systems compared to other systems, are calculated according to prEN 15603. Standards linked to photovoltaic systems are listed in Annex A.

Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Heat generation systems, photovoltaic systems

AS/NZS 2712:2007 太阳能和热泵水加热器.设计和结构

Specifies performance-based requirements for the design and construction of both components of solar and heat pump hot water supply systems, and complete systems, for household premises and for commercial and industrial installations comparable with household installations, intended to deliver drinking water of acceptable quality.

Solar and heat pump water heaters - Design and construction

JG/T 220-2007 铜铝复合柱翼型散热器

Copper-aluminum column-wing type radiator

JG/T 2-2007 钢制板型散热器

Steel plate radiator

ANSI/ASHRAE 103P-2007 住宅中央暖气炉和锅炉每年燃料使用效率的测试方法

This second public review draft of Standard 103-1993R makes three proposed independent substantive changes to the first draft. The changes were in response to comments submitted during the first public review. The first change is to Section 7.1; the second change is to Sections 8.6, 11.2.8.1, and 11.4.8.1.1; and the third change is to Table 7 in Section 9.8.3, which also impacts Sections 11.4.8.2 and 11.4.8.4. See the foreword to this addendum for details.

Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers

DB13(J) 60-2006 市政供热管道及设备安装工程施工质量验收规程

本规程是根据河北省建设厅关于印发《2006年度省工程建设 标准和标准设计第一批编制计划》(冀建质[2006]046号)的通 知，由唐山市建设工程质量监督检测站会同有关单位共同编制完 成的。 本规程在编制过程中，编制组进行了广泛的调查研究，总结 了河北省市政基础设施工程施工质量验收的实践经验，坚持了 “验评分离、强化验收、完善手段、过程控制”的指导思想，经河 北省建设厅组织审查定稿。 本规程主要包括总则、术语、基本规定、施工测量、土建工 程、供热管道安装、热力站、中继泵站安装、供热锅炉房安装、 防腐保温工程、试验、清洗、试运行等施工质量验收的主要内容。 另附1个附录，主要是施工现场质量检查和验收时经常用到的表格 等内容。 本规程应与《市政基础设施工程施工质量验收统一标准》 (DB13(J)53-2005)和(市政基础设施工程施工质量验收通用 规程)(DB13(J)54-2005)配合使用。本规程适用于河北省辖区内符合以下参数的新建、扩建、 改建的供热管道及设备安装工程的质量验收。

Construction Quality Acceptance Regulations for Municipal Heating Pipeline and Equipment Installation Engineering

DIN EN 656/A1:2006 燃器中央供热系统.标称热值大于70kW小于300kW的B型锅炉

Add to the first list of indents: - of the standard type possibly producing condensation in certain circumstances; - of the low-tempetature type; Delete in the second list of indents: - of the low-temperature type;

Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW; English version of DIN EN 656/A1:2006-12

DIN V 44578-4:2006 室内电气采暖.水管输送的中央暖气系统的电蓄热锅炉性能特性.第4部分:计算

This preliminary standard applies to electric storage boilers for residential and similar buildings.

Electric room heating -Characteristics of performance of electric storage boilers for water piped central heating - Part 4: Calculation

DIN V 44578-3:2006 室内电气采暖.水管输送的中央暖气系统的电蓄热锅炉性能特性.第3部分:要求

This preliminary standard applies to electric storage boilers for residential and similar buildings.

Electric room heating - Characteristics of performance of electric storage boilers for water piped central heating - Part 3: Requirements

DIN V 44578-2:2006 室内电气采暖.水管输送的中央暖气系统的电蓄热锅炉性能特性.第2部分:试验

This preliminary standard applies to electric storage boilers for residential and similar buildings.

Electric room heating - Characteristics of performance of electric storage boilers for water piped central heating - Part 2: Tests

DIN V 44578-1:2006 室内电气采暖.水管输送的中央暖气系统的电蓄热锅炉性能特性.第1部分:分类和定义

This preliminary standard applies to electric storage boilers for residential and similar buildings.

Electric room heating - Characteristics of performance of electric storage boilers for water piped central heating - Part 1: Classification and definitions

ANSI/UL 391-2006 烧固体燃料和组合燃料的中心和辅助炉的安全标准

This proposal to UL 391 modifies proposals announced in the February 24, 2006 issue of ANSI's Standards Action.

Standard for Safety for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces

CECS 206-2006 钢外护管真空复合保温预制.直埋管道技术规程

本规程适用于工作压力不大于2.5MPa、温度不高于350°C的蒸汽或温度不高于200°C的热水作为供热介质的钢外护管真空复合保温预制直埋管道的制造、工程设计、施工验收及运行管理。

Technical specification for steel jacket.pre-insulated pipeline with vacuum layer

MT/T 1000-2006 煤矿在用工业锅炉节能监测方法和判定规则

本标准规定了煤矿在用工业锅炉节能监测检查项目、节能监测测试项目、节能监测方法和节能监测判定规则。 适用于煤矿在用的额定热功率大于等于0.7MW(1t/h)、小于等于24.5MW(35t/h)或额定供热量大于2.5GJ/h的以煤、油、气为燃料的蒸汽或热水锅炉。

Monitoring method and decision regulation for energy conservation of industrical boiler for coal mine

NF P52-307-1:2006 建筑产品.安装于地板下的暖气系统.第1部分:技术条款的合同单.分离隔热地板砖

Building works - Construction of hot water operated underfloor heating - Part 1 : contract hill of technical clauses - Separate, insulated floor tiles.

NF E39-003:2006 地区供热.冷热水输送分配管路.计算特性

District heating - Hot or cold water transport and distribution networks - Particularities of calculation.

NF E39-002:2006 地区供热.冷热水输送分配管路.设计特性

District heating - Hot or cold water transport and distribution networks - Particularities of design.

NF E39-004:2006 地区供热.冷热水输送分配管路.安装特性

District heating - Hot or cold water transport and distribution networks - Particularities of installation.

NY/T 1001-2006 民用省柴节煤灶、炉、炕技术条件

本标准规定了民用炊事省柴灶、节煤炉和炕连灶的技术要求、检验规则及运行管理规范。 本标准适用于以柴草（薪柴、秸秆、树叶等）、畜粪和散煤为燃料的民用省柴灶、节煤炉和炕连灶。

Technical specification of domestic improved stoves and kangs for firewood and coal