P94 金属设备与工艺管道安装工程 标准查询与下载

DIN CEN/TS 1455-2:2012 建筑结构内土壤和废弃物排出(低温与高温)用塑料管系统. 丙烯腈-丁二烯-苯乙烯共聚物(ABS). 第2部分: 一致性评估指南; 德文版本CEN/TS 1455-2-2012

Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Guidance for the assessment of conformity; German version CEN/TS 1455-2:2012

CECS 315-2012 钢骨架聚乙烯塑料复合管管道工程技术规程

Steel skeleton polyethylene plastic composite pipe engineering technical regulations

DIN 16841:2012 塑料管道系统.管道和组件试验.四点载荷测定塑料弯曲度

Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading

BS EN 13480-6:2012 金属工业管道.埋管附加要求

Metallic industrial piping. Additional requirements for buried piping

BS ISO 13470:2012 球磨管道铸铁系统的非开挖应用.产品设计和安装

Trenchless applications of ductile iron pipes systems. Product design and installation

BS EN 13480-1:2012 金属制工业管道.总则

Metallic industrial piping. General

CECS 306-2012 超高分子量聚乙烯钢骨架复合管管道施工及验收规程

Construction and acceptance regulations of ultra-high molecular weight polyethylene steel skeleton composite pipe pipeline

ASME B31.4 INTERPRETATIONS-2012 B31.4的说明.液体和泥浆用管道输送系统

Intrepretations to B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids (Includes Interpretations through No. 9)

ISO 15306:2003/Amd 1:2012 玻璃增强热固性塑料管道.抗周期性内压力的测定.修改件1

Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure; Amendment 1

ASME B31.3-2012 加工管线

Process Piping

ASME B31.4-2012 液体和泥浆用管道输送系统

Pipeline Transportation Systems for Liquid and Slurries

ANSI/ASTM D2774:2012 热塑压力管地下安装用实施规程

Practice for Underground Installation of Thermoplastic Pressure Piping

DIN 20066:2012 液压流体动力.软管总成.尺寸规格,要求

Hydraulic fluid power - Hose assemblies - Dimensions, requirements

ASME B31.1-2012 动力管道

Rules for this Code Section have been developed considering the needs for applications that include piping typically found in electric power generating stations, in industrial and institutional plants, geothermal heating systems, and central and district heating and cooling systemsThis Code prescribes requirements for the design, materials, fabrication, erection, test, inspection, operation, and maintenance of piping systems. Piping as used in this Code includes pipe, flanges, bolting, gaskets, valves, pressure-relieving valves/devices, fittings, and the pressure containing portions of other piping components, whether manufactured in accordance with Standards listed in Table 126.1 or specially designed. It also includes hangers and supports and other equipment items necessary to prevent overstressing the pressure containing components. Rules governing piping for miscellaneous appurtenances, such as water columns, remote water level indicators, pressure gages, gage glasses, etc., are included within the scope of this Code, but the requirements for boiler appurtenances shall be in accordance with Section I of the ASME Boiler and Pressure Vessel Code, PG-60.

Power Piping (B31.1 - 2012)

ANSI/ASME B31.1-2012 动力管道

Prescribes minimum requirements for the design, materials, fabrication, erection, test, and inspection of power and auxiliary service piping systems for electric generation station, industrial and institutional plants, central and district heating plants, and district heating systems.

Power Piping

ASTM F412-12 与塑料管道系统有关的标准术语

1.1 This terminology is a compilation of definitions of technical terms used in the plastic piping industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee F17 is responsible it is included only when judged, after review, by Subcommittee F17.91 to be a generally usable term. 1.3 Definitions that are identical to those published by other ASTM committees or other standards organizations are identified with the committee number (for example, D20) or with the abbreviation of the name of the organization (for example, IUPAC International Union of Pure and Applied Chemistry). 1.4 A definition is a single sentence with additional information included in notes. 1.5 Definitions are followed by the committee responsible for the standard(s) (for example, [F17.26]) and standard numbers(s) in which they are used (for example, F714).

Standard Terminology Relating to Plastic Piping Systems

ANSI/ASME B31.3-2012 工艺管道

Rules for the Process Piping Code Section B31.3 have been developed considering piping typically found in petroleum refineries; chemical, pharmaceutical, textile, paper, semiconductor, and cryogenic plants; and related processing plants and terminals.

Process Piping

ANSI/ASME B31G-2012 腐蚀管道剩余强度的测定手册:ASME B31标准压力管道规程的补充件

Manual for Determining the Remaining Strength of Corroded Pipelines: A Supplement to B31, Code for Pressure Piping

ASTM F2831-12(2017) 金属压力管道系统修复用内部非结构环氧阻隔涂层材料的标准实施规程

5.1 This practice is for use by designers and specifiers, regulatory agencies, owners, contractors, and inspection organizations who are involved in rehabilitation of pressurized piping systems. 1.1 This standard is intended to establish the minimum criteria necessary for use of a mechanically mixed, blended, epoxy barrier coating (AWWA Class I) that is applied to the interior of 1/2 in. to 36 in. metallic pipe or tube used in pressurized piping systems for corrosion protection and to improve flow rates. There is no restriction as to the developed length of the piping system other than the method of application (“blow through”, spin cast or hand sprayed) and the characteristics of the epoxy coating being applied but the manufacturer’s engineer shall be consulted for any limitations associated with this product, process and its application for the end user. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

ASTM F2831-12 金属压力管道系统修复用内部非结构环氧涂层材料的标准实施规程

This practice is for use by designers and specifiers, regulatory agencies, owners, contractors, and inspection organizations who are involved in rehabilitation of pressurized piping systems.1.1 This standard is intended to establish the minimum criteria necessary for use of a mechanically mixed, blended, epoxy barrier coating (AWWA Class I) that is applied to the interior of ½in. to 36 in. metallic pipe or tube used in pressurized piping systems for corrosion protection and to improve flow rates. There is no restriction as to the developed length of the piping system other than the method of application (“blow through”, spin cast or hand sprayed) and the characteristics of the epoxy coating being applied but the manufacturer’s engineer shall be consulted for any limitations associated with this product, process and its application for the end user. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems