Q04 基础标准与通用方法 标准查询与下载

BS EN 12939:2001 建筑材料和产品的热性能.用护热板和热流计测定热阻.高和中热阻的厚产品

This standard gives the procedures to determine the thermal resistance of products the thicknesses of which exceed the maximum thickness for guarded hot plate or heat flow meter apparatus. In any case most of the procedures described in this standard require apparatus that allows tests on specimens up to 100 mm thick. This standard gives guidelines to assess the relevance of the thickness effect, i.e. to establish whether the thermal resistance of a thick product can or cannot be calculated as the sum of the thermal resistances of slices cut from the product, these guidelines complement the indications given in ISO 8302:1991 on the guarded hot plate apparatus. This standard describes testing conditions which prevent the onset of convection, which could take place in some products under the considered temperature differences and thicknesses.

Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance

ASTM E1557-01 建筑构件及有关现场工作标准分类--统一格式Ⅱ

1.1 This standard establishes a classification of building elements and related sitework. Elements, as defined here, are major components common to most buildings. Elements usually perform a given function, regardless of the design specification, construction method, or materials used. The classification serves as a consistent reference for analysis, evaluation, and monitoring during the feasibility, planning, and design stages of buildings. Using UNIFORMAT II ensures consistency in the economic evaluation of buildings projects over time and from project to project. It also enhances reporting at all stages in construction-from feasibility and planning through the preparation of working documents, construction, maintenance, rehabilitation, and disposal. 1.2 This classification applies to buildings and related site work. It excludes specialized process equipment related to a building''s functional use but does include furnishings and equipment.1.3 The Classification incorporates three hierarchical levels described as Levels 1, 2, and 3. Appendix X1 presents a more detailed suggested Level 4 classification of sub-elements.1.4 UNIFORMAT II is an elemental format similar to the original UNIFORMAT elemental classification. UNIFORMAT II differs from the original UNIFORMAT, however, in that it takes into consideration a broader range of building types and has been updated to categorize building elements as they are in current building practice.

Standard Classification for Building Elements and Related Sitework-UNIFORMAT II

ASTM E2178-01 建筑材料透气性的标准测试方法

1.1 This test method is to determine the air permeance of building materials at various pressure differentials with the intent of determining an assigned air permeance rate of the material at the reference pressure difference (916;P) of 75 Pa.1.2 The method is intended to assess flexible sheet or rigid panel-type materials using a 1 m X 1 m specimen size.1.3 The values stated in SI units are to be regarded as standard. No other units of measurements are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Air Permeance of Building Materials

ANSI/ASTM E2128:2001 建筑墙体漏水性评价指南

This guide describes methods for determining and evaluating causes of water leakage of exterior walls. For this purpose, water penetration is considered leakage, and therefore problematic, if it exceeds the planned resistance or temporary retention and drainage capacity of the wall, is causing or is likely to cause premature deterioration of a building or its contents, or is adversely affecting the performance of other components. A wall is considered a system including its exterior and interior finishes, fenestration, structural components and components for maintaining the building interior environment. Investigative techniques discussed may be intrusive, disruptive or destructive. It is the responsibility of the investigator to establish the limitations of use, to anticipate and advise of the destructive nature of some procedures, and to plan for patching and selective reconstruction as necessary. This practice does not purport to address all of the safety concerns, if any, associated with its use. Establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Awareness of safety and familiarity with safe procedures are particularly important for above-ground operations on the exterior of a building and destructive investigative procedures which typically are associated with the work described in this guide.

Guide for Evaluating Water Leakage of Building Walls

ASTM C904-01(2006) 耐化学腐蚀的非金属材料标准术语

Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

ASTM D6671-01 非方向性纤维增强多聚矩阵元件的混合模式I-模式II内层裂纹强度的标准试验方法

1.1 This test method describes the determination of interlaminar fracture toughness, Gc, of continuous fiber-reinforced composite materials at various Mode I to Mode II loading ratios using the Mixed-Mode Bending (MMB) Test.1.2 This test method is limited to use with composites consisting of unidirectional carbon fiber tape laminates with brittle and tough single-phase polymer matrices. This test is further limited to the determination of fracture toughness as it initiates from a delamination insert. This limited scope reflects the experience gained in round robin testing. This method may prove useful for other types of toughness values and for other classes of composite materials; however, certain interferences have been noted (see Section 6). This test method has been successfully used to test the toughness of both glass fiber composites and adhesive joints.1.3 The values stated in SI units are to be regarded as standard. The values provided in parentheses are for information only.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standards Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

ASTM C904-01 耐化学腐蚀的非金属材料标准术语

Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

ASTM E253-01a 材料和产品感官评定的相关标准术语

Standard Terminology Relating to Sensory Evaluation of Materials and Products

DIN EN 1946-5:2000 建筑产品和部件热性能.实验室评估热传导性能专用准则.第5部分:管试验测量法

The document provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measuremnt on circular pipe insulation. It gives gudiance to the organization and contents of the equipment manual, the calibration and maintenance files and the measurement procedure document. It provides information on mandatory equipment itself and on calculations for the equipment design and error analysis on circular pipe apparatus and on the guarded hot plate apparatus. It provides information on experimental procedures suitable for the assessment of instrument accuracy.#,,#

Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods; German version EN 1946-5:2000

BS EN 1946-5:2000 建筑产品和构件的热性能.试验室测量热传递性能评估的特殊标准.通过管道试验方法测量

Part 5 of this standard provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measurements on circular pipe insulation according to EN ISO 8497:1994. It complements the common criteria in Part 1. Guidance is given on the organization and contents of the equipment manual, the calibration and maintenance files and the measurement procedure document. It provides information on mandatory equipment performance specifications, on equipment description and on calculations for the equipment design and error analysis based on both EN ISO 8497:1994 on circular pipe apparatus and on Part 2 of this standard on the assessment of guarded hot plate apparatus. It gives information on experimental procedures suitable for the assessment of equipment accuracy, based on both EN ISO 8497:1994 on circular pipe apparatus and on Part 2 of this standard on the assessment of guarded hot plate apparatus.

Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Measurements by pipe test methods

DIN EN 1946-4:2000 建筑产品和建筑部件的热性能.实验室评估热传导性能专用准则.第4部分:高温箱测量法

The document provides specific technical criteria for the assessment of laboratories to undertake steady-state heat transfer property measurements on products and components using calibrated or guarded hot box apparatus or using a heat flow meter in a hot box apparatus and to undertake steady-state heat transfer property measurements on specific components, as doors and windows. It gives guidance on the organisation and contents of the equipment manual, the calibration and maintenance files and the measurement procedure document. It provides information on mandatory equipment performance specifications and equipment description. It supplements error analysis and calculation for the equipment design.

Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 4: Measurements by hot box methods; German version EN 1946-4:2000

NF P92-120-2:2000 受力构件的防火试验.第2部分:地板和屋面

Fire resistance tests for loadbearing elements - Part 2 : floors and roofs.

NF P92-130-2:2000 服务设施的防火试验.第2部分:防火挡板

Fire resistance tests for service installations - Part 2 : fire dampers.

NF P92-130-1:2000 服务设施的防火试验.第1部分:管道

Fire resistance tests for service installations - Part 1 : ducts.

NF P92-110-2:2000 非受力构件的防火试验.第2部分:天花板

Fire resistance tests for non-loadbearing elements - Part 2 : ceilings.

NF P92-110-1:2000 非受力构件的防火试验.第1部分:墙

Fire resistance tests for non-loadbering elements - Part 1 : walls.

BS EN 13009:2000 建筑材料和产品的温湿性能.吸水膨胀系数的测定

This standard specifies a procedure for determining the hygric expansion or contraction behaviour of building materials as a function of moisture content. It is applicable for mineral, porous hygroscopic materials. For other materials showing moisture-induced deformations, the procedure described can be applied in a suitable way taking into account their specific moisture behaviour. This standard is relevant to material states when reversible expansion/contraction processes may be assumed, but not to states governed by irreversible processes such as shrinkage after material production or after initial drying.

Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient

DIN EN 13009:2000 建筑材料和产品湿热性能.湿膨胀系数测定

The document specifies a procedure for determination the hygrig expansion or contraction behaviour of building materials as a property of moisture content. It is applicable for mineral, porous hygroscopic materials. For other materials showing moisture deformations, the procedure specified can be adapted in a suitable way taking into account their specific moisture behaviour. This document is relevant to material states when practically reversible expansion/contraction processes may be assumed but excluding initial shrinkage tests after material production. This procedure does not take precedence over material specific test methods.

Hygrothermal performance of building materials and products - Determination of hygric expansion coefficient; German version EN 13009:2000

ISO 12571:2000 建筑材料及制品的湿热性能 吸湿性质的测定

This standard specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber (climatic chamber method). The desiccator method is the reference method. The standard does not specify the method for sampling. The methods specified in this standard can be used to determine the moisture content of a sample in equilibrium with air at a specific temperature and humidity.

Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties

ISO 12570:2000 建筑材料及制品的湿热性能 含湿率的测定 烘干法

This standard, which is applicable to porous water permeable materials, specifies a general method for determining the free water content of building materials by drying at elevated temperature. The standard does not specify the method for sampling.

Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature