Q10 建材产品综合 标准查询与下载

DIN EN 13707:2007 防水用柔性薄板.屋顶防水用增强型沥青薄板.定义和特性

This document specifies definitions and characteristics for flexible reinforced bitumen sheets for which the intended use is roofing.This covers sheets used as top layers,intermediate layers and underlayers.It does mot cover reinforced bitumen sheets for waterproofing used as underlayers for discontinuous roofing. It does not cover waterproofing sheets which are intended to be used fully bonded under bituminous products(e.g. asphalt) directly applied at high temperature,specified by prEN 14695.

Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics; German version EN 13707:2004 + A1:2006

BS EN 14390:2007 防火试验.表面制品用大范围室内参照试验

This European Standard specifies a test method to evaluate the reaction to fire performance of building products. A fire is simulated which under well-ventilated conditions starts in a corner of a small room with a single open doorway. The method is intended to evaluate the contribution of a surface product to fire growth in a room configuration, using a specified ignition source. It constitutes a reference test for this type of product within the European classification system for reaction to fire performance of construction products. The method is particularly suitable for construction products which cannot be tested in their end use application in a small or intermediate laboratory scale. The method can also be used to assess the effect of an insulating substrate on the product performance. A test performed in accordance with the method specified in this European Standard provides data for the early stages of a fire from ignition up to flashover. The method is not intended to evaluate floor coverings. It may not be suitable for some free-standing products because their integrity, when exposed to fire, could have a decisive influence on their behaviour. NOTE The term “surface product” as used in the title and scope of this European Standard specifically relates to internal surface linings, assemblies, pipes and pipe insulation products used in buildings.

Fire test - Large-scale room reference test for surface products

JIS A 1451 AMD 1:2007 建筑物材料和建筑物结构部件的磨损试验方法(采用配合磨擦和冲击旋转盘的铺地材料方法用磨擦试验方法)(修改件1)

Method of abrasion test for building materials and part of building construction (method of abrasion test for flooring materials method with rotating disk fitted friction and impact) (Amendment 1)

DIN 52108:2007 无机非金属材料的测试.依照Boehme使用砂轮进行磨损试验.砂轮法

This standard specifies the wear test for inorganic non-metallic materials by using the grinding wheel according to B攈me and the testing apparatus to be used for the test method.

Testing of inorganic non-metallic materials - Wear test using the grinding wheel according to B?hme - Grinding wheel method

ASTM F1645/F1645M-07 蜂窝状中心材料中水分迁移的标准试验方法

Water permeability is a fundamental physical property that can be used in conjunction with other properties to characterize honeycomb sandwich core materials. Migration testing can be used to characterize and compare the relative permeability of honeycomb core materials to water. This test method provides a standard method of characterizing the rate of water migration within honeycomb sandwich core materials for design properties, material specifications, research and development applications, and quality assurance. Factors that influence water migration rate characteristics of honeycomb sandwich core materials and shall therefore be reported include the following: core material, methods of material fabrication, core geometry (cell size), core thickness, core thickness uniformity, cell wall thickness, specimen geometry, specimen preparation, specimen conditioning, facing material, facing permeability, adhesive permeability, adhesive thickness, and methods of mass, volume, and water column height measurement.1.1 This test method covers the determination of water migration in honeycomb core materials.1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Water Migration in Honeycomb Core Materials

ASTM D3665-07 建筑材料的随机采样用标准实施规程

1.1 This practice covers the determination of random locations (or timing) at which samples of construction materials can be taken. For the exact physical procedures for securing the sample, such as a description of the sampling tool, the number of increments needed for a sample, or the size of the sample, reference should be made to the appropriate standard method. The selection procedures in Section 6 utilize the table of four-digit numbers given in Table 1.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Random Sampling of Construction Materials

ASTM D5397-07 用缺口恒定拉力荷载试验评定聚烯烃土工薄膜抗应力扯裂的标准试验方法

This test method does not purport to interpret the resulting response curve. Such interpretation is left to the parties involved in the commissioning and reporting of the test results. This test method is intended as an index test and may be used for grading polyolefin geomembrane sheets in regard to their stress cracking sensitivity. 5.2.1 Conditions that can affect stress cracking include: level of loading, test temperature and environment, microstructure, polymer additive package, processing history, and thermal history.1.1 This test method is used to develop test data from which the susceptibility of polyolefin geomembrane sheet material to stress cracking under a constant tensile load condition and an accelerated environmental condition can be evaluated.1.2 This test method measures the failure time associated with a given test specimen at a specified tensile load level. Results from a series of such tests utilizing a range of load levels can be used to construct a stress-time plot on a log-log axis.1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

ANSI/NSF 52(i3)-2007 辅助地板材料

To update the Normative References and boilerplate language in the Food Equipment family of Standards.

Supplemental flooring

ASTM C1180-07 砌块用灰浆和水泥浆标准术语

1.1 This terminology covers terms, definitions of terms, descriptions of terms, nomenclature, and explanations of abbreviations, acronyms, and symbols specifically associated with standards under the jurisdiction of ASTM Committee C12 on Mortars and Grouts for Unit Masonry.1.2 The definitions and descriptions of terms in this terminology pertain to Test Methods C 780, C 952, C 1019, C 1148, C 1324, and C 1403; Specifications C 144, C 270, C 404, C 476, C 887, C 1142, and C 1384; Practice C 946; and Guide C 1586.

Standard Terminology of Mortar and Grout for Unit Masonry

BS 8481:2006 内部石膏,水泥,水泥及石灰抹灰系统的设计,制备和应用.规范

This British Standard specifies the design, preparation and application of plaster based on gypsum, cement, cement and lime, for internal plastering on all types of background used under normal conditions. It includes plastering onto both new and old backgrounds and the maintenance and repair of existing work. It concerns materials, backgrounds, preparation of the surface to be plastered, choice of suitable gypsum, cement, cement and lime plastering systems, methods of application and inspection and testing of plastering. Recommendations on gypsum, cement, cement and lime plastering mixes with special properties intended to enhance thermal insulation, fire resistance, acoustic insulation and to increase radiation absorption maintenance and repair are also covered. NOTE Relevant data are summarized in a series of tables. This standard should be read in conjunction with BS EN 13914-2 especially regarding surface, requirements, flatness, verticality, angularity, types of finish and smoothness which are not dealt with in this standard.

Design, preparation and application of internal gypsum, cement, cement and lime plastering systems - Specification

NY/T 1147-2006 建材产品生产中工业废渣掺加量测定方法

本标准规定了建材产品生产中工业废渣掺加量的测定方法。 本标准适用于水泥、砖瓦等烧结建材制品。

Method for determination of industrial waste slag contents of building materical production

JIS R 9011:2006 石灰化学分析方法

この規格は，生石灰，消石灰，軽焼ドロマイト及び水酸化ドロマイトの試験方法について規定する。

Test methods of lime

CH/T 1023-2005 菱镁胶凝材料改性剂

Magnesite cement material modifier

JC/T 688-2006 玻镁平板

Glass magnesium flat plate

JC 688-2006 玻镁平板

本标准规定了玻镁平板的分类、原材料要求、技术要求、试验方法、检验规则、包装、运输、标志和贮存。 本标准适用于以氧化镁（MgO）、氯化镁（MgCl）或硫酸镁（MgSO）和水（HO）三元体系，经合理配制和改性，以玻纤网布或其它材料增强，以轻质材料为填料，经机械滚压而制成的玻镁平板。 玻镁平板主要用于室内非承重内隔墙和吊顶，以及用于各类装饰板的基板。

Glass fiber & magnesium cement board

JC/T 646-2006 玻镁风管

本标准规定了玻镁风管(以下简称“风管”)的产品分类、一般规定、要求、抽样、试验方法、检验规则、标志、产品质量合格证、使用说明书、包装、运输和贮存。 本标准适用于以改性氯氧镁水泥为胶结材料，以中碱或无碱玻璃纤维布为增强材料，以绝热用模塑聚苯乙烯泡沫塑料等为芯材而制成的风管。

Glass fibre reinforced magnesium oxychloride cement ventiduct

JIS A 1436 AMD 1:2006 充分粘结在基质上的覆层和片层的脱落能力的试验方法(修改件1)

Test methods for movement capability of coatings and sheets fully adhered on substrate (Amendment 1)

BS EN 13501-5:2005 建筑产品和建筑部件的燃烧特性分类.使用屋顶外部着火试验获得的数据进行分类

This European Standard provides the fire performance classification procedures for roofs/roof coverings exposed to external fire based on the four test methods given in ENV 1187:2002. For the classification of a roof/roof covering, only those test methods need to be applied for which the corresponding classification is envisaged. Products are considered in relation to their end use application. NOTE The distinction between roofs with a steep slope and facades, in terms of the test and classification standard to be applied, may be subject to national regulations. General information on the four test methods in ENV 1187:2002 is given in Annex A.

Fire classification of construction products and building elements — Part 5: Classification using data from external fire exposure to roofs tests

ASTM D6662-06 聚烯烃基塑料木装饰板的标准规范

1.1 This specification covers polyolefin-based plastic lumber products for use as exterior residential decking boards.1.2 Plastic lumber products are currently made predominantly with recycled polyolefin plastics (in particular high-density polyethylene) where the products are more or less non-homogenous in the cross-section. However, this specification may also be applicable to similar manufactured plastic products made from other plastic and plastic composite materials that have non-homogenous cross-sections.1.3 This specification details a procedure to calculate recommended span lengths for spacing of support joists. This procedure was developed using experimental data from a typical unreinforced plastic lumber made predominantly from recycled high-density polyethylene. The methodology to develop span lengths for other types and compositions of plastic lumber is detailed in Appendix X1 of this standard.1.4 The values are stated in inch-pound units, as these are currently the most common units used by the construction industry. Equivalent SI units are indicated in parentheses. However, the units stated for irradiance exposure in the weatherability section (6.3) are in SI units as these are the units commonly used for testing of this type.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 18212;There is no similar or equivalent ISO Standard.

Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM E2536-06 评估防火试验中不确定度测量用标准指南

Users of fire test data often need a quantitative indication of the quality of the data presented in a test report. This quantitative indication is referred to as the “measurement uncertainty”. There are two primary reasons for estimating the uncertainty of fire test results. 5.1.1 ISO/IEC 17025 requires that competent testing and calibration laboratories include uncertainty estimates for the results that are presented in a report. 5.1.2 Fire safety engineers need to know the quality of the input data used in an analysis to determine the uncertainty of the outcome of the analysis.1.1 This guide covers the evaluation and expression of uncertainty of measurements of fire test methods developed and maintained by ASTM International, based on the approach presented in the GUM. The use in this process of precision data obtained from a round robin is also discussed.1.2 Application of this guide is limited to tests that provide quantitative results in engineering units. This includes, for example, methods for measuring the heat release rate of burning specimens based on oxygen consumption calorimetry, such as Test Method E 1354.1.3 This guide does not apply to tests that provide results in the form of indices or binary results (for example, pass/fail). For example, the uncertainty of the Flame Spread Index obtained according to Test Method E 84 cannot be determined.1.4 In some cases additional guidance is required to supplement this standard. For example, the expression of uncertainty of heat release rate measurements at low levels requires additional guidance and uncertainties associated with sampling are not explicitly addressed.1.5 This fire standard cannot be used to provide quantitative measures.

Standard Guide for Assessment of Measurement Uncertainty in Fire Tests