共找到 167 条与 水泥混合材与外加剂 相关的标准,共 12 页
1.1 This test method covers the testing of materials proposed for use as air-entraining admixtures in the field.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information purposes only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.3 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
Standard Test Method for Air-Entraining Admixtures for Concrete
Assessment corrosion behaviour of admixtures according the series DIN EN 934
1.1 This specification covers the requirements and methods for establishing the suitability of a material for use as an air-entraining addition to be interground with the clinker in the manufacture of air-entraining hydraulic cement conforming to Specifications C 150, C 595, and C 1157.1.2 The values stated in SI units are to be regarded as the standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning8212; Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.)
Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
This British Standard specifies requirements for the production, chemical composition and mechanical and physical properties of limestone fines for use in combination with Portland cement class 42.5 N or greater conforming to BS EN 197-1 as a component of concrete, mortar or grout. It also specifies requirements for marking, provision of information, sampling and testing for acceptance at delivery, and conformity criteria for the manufacturer's autocontrol system. NOTE Guidance on the use of limestone fines is given in Annex A.
Specification for limestone fines for use with Portland cement
1.1 This test method covers the testing of materials proposed for use as air-entraining admixtures in the field. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information purposes only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
Standard Test Method for Air-Entraining Admixtures for Concrete
1.1 This specification covers materials proposed for use as admixtures to be added to a portland-cement shotcrete mixture for the purpose of altering the properties of the mixture. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.3 The values stated in inch-pound units are to be regarded as the standard.
Standard Specification for Admixtures for Shotcrete
이 규격은 우수거에 사용하는 뚜껑(이하 뚜껑이라 한다.)에 대하여 규정한다.
Gully grating
Methods of chemical analysis of silicious materials for cement industry
この規格は,ポリマーセメントモルタル,ポリマーセメントコンクリートなどに用いるセメント混和用ポリマーとしてのセメント混和用ポリマーディスパージョン及び再乳化形粉末樹脂について規定する。
Polymer dispersions and redispersible polymer powders for cement modifiers
1.1 This specification covers methods to investigate the effectiveness of a material to beneficially change the properties of hydraulic cements when the material is interground with the clinker during manufacture of the cement. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 The effect of additions in cement may markedly change properties other than those they are intended to modify. This specification is designed to test for such changes. Table 1 sets forth values for those properties of cement pastes and mortars that would permit a judgment of the changes effected by an addition. Likewise, Table 2 sets forth similar criteria for concrete. Certain additions may be found effective for more than one purpose as indicated in 3.1.4 and 3.1.5.
Standard Specification for Functional Additions for Use in Hydraulic Cements
1.1 This specification covers methods to investigate the effectiveness of a material to beneficially change the properties of hydraulic cements when the material is interground with the clinker during manufacture of the cement. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 The effect of additions in cement may markedly change properties other than those they are intended to modify. This specification is designed to test for such changes. Table 1 sets forth values for those properties of cement pastes and mortars that would permit a judgment of the changes effected by an addition. Likewise, Table 2 sets forth similar criteria for concrete. Certain additions may be found effective for more than one purpose as indicated in 3.1.4 and 3.1.5.
Standard Specification for Functional Additions for Use in Hydraulic Cements
1.1 This test method covers the testing of materials proposed for use as air-entraining admixtures in the field. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information purposes only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 The text of this test method references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
Standard Test Method for Air-Entraining Admixtures for Concrete
Methods of chemical analysis of iron correcting materials for cement industry
Steel slag for asphalt mixture pavement and road base
Admixtures for concrete, mortar and grout. Test methods. Part 11 : determination of air void characteristics in hardened concrete.
1.1 This specification covers latex bonding agents, suitable for brush, broom, or spray application, to bond fresh concrete to hardened concrete. 1.2 These bonding agents are intended for bonding new concrete to old concrete such as interior surfaces, floors, roadways, bridge decks, ramps, runways, walks, and curbs.
Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
1.1 This specification pertains to the criteria and tests to be used for determining whether a processing addition, when used in the recommended amount at the option of the cement producer in the manufacture of hydraulic cements, meets the requirements as prescribed by definition in Specifications C 150, C 1157, C 845, and C 595. The materials listed in the following former ASTM Specifications shall be considered as meeting the requirements of this specification: C 150 - 62, for Portland CementC 205 - 58 T, for Portland Blast-Furnace Slag CementC 340 - 58 T, for Portland Pozzolan CementC 358 - 58, for Slag Cement1.2 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
1.1 This specification pertains to the criteria and tests to be used for determining whether or not a processing addition, when used in the recommended amount at the option of the cement producer in the manufacture of hydraulic cements, meets the requirements as prescribed by definition in Specifications C 150, C 1157, C 845, and C 595. The materials listed in the following former ASTM Specifications shall be considered as meeting the requirements of this specification: C 150-62, for Portland Cement C 205-58 T, for Portland Blast-Furnace Slag Cement C 340-58 T, for Portland Pozzolan Cement C 358-58, for Slag Cement 1.2 The following safety hazards caveat pertains only to the test methods described in this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
Additions for concrete. Siliceous additions. Specifications and conformity criteria.
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号