Q13 混凝土、集料、灰浆、砂浆 标准查询与下载
共找到 2793 条与 混凝土、集料、灰浆、砂浆 相关的标准，共 187 页
1.1 This specification covers the requirements for the application of full thickness portland cement-based plaster for exterior (stucco) and interior work. These requirements do not by default define a unit of work or assign responsibility for contractual purposes, which is the purview of a contract or contracts made between contracting entities. 1.2 This specification sets forth tables for proportioning of various plaster mixes and plaster thickness. Note 1: General information will be found in Annex A1. Design considerations will be found in Annex A2. 1.3 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only. 1.4 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Application of Portland Cement-Based Plaster
- ICS
- 91.100.10
- CCS
- Q13
- 发布
- 2018
- 实施
Application technical specification of machine-made sand and machine-made sand concrete
- ICS
- 91.100.30
- CCS
- Q13
- 发布
- 2017-12-01
- 实施
- 2017-12-30
本规程包括高钛重矿渣桥梁高性能混凝土术语、基本规定、原材料、配合比设计、施工、质量检查与验收等内容。 本规程适用于高钛重矿渣桥梁高性能混凝土设计、制备、施工、养护、质量检查与验收。
High-performance concrete technical specification for high-titanium heavy slag bridges
- ICS
- 91.100.30
- CCS
- Q13
- 发布
- 2017-09-19
- 实施
- 2017-10-01
This European Standard covers the materials that may be used in the manufacture of cement grouts and the required properties and composition of the grout. It is applicable to grouting of tendons in all types of structures including bridges and buildings.
Grout for prestressing tendons - Basic requirements; German version EN 447:2007
- ICS
- 91.100.10
- CCS
- Q13
- 发布
- 2017-09-00
- 实施
DTU 21 - Building work - Execution of concrete structures - Part 2 : model special conditions of contract
- ICS
- 91.010.20;91.080.40
- CCS
- Q13
- 发布
- 2017-06-17
- 实施
- 2017-06-17
DTU 21 - Building works - Execution of concrete structures - Part 1-1 : model technical specification - Part 1-2 : general criteria for the selection of materials - Part 2 : model special conditions of contract
- ICS
- 91.010.20;91.080.40
- CCS
- Q13
- 发布
- 2017-06-17
- 实施
- 2017-06-17
DTU 21 - Building works - Execution of concrete structures - Part 1-1 : model technical specification
- ICS
- 91.010.20;91.080.40
- CCS
- Q13
- 发布
- 2017-06-17
- 实施
- 2017-06-17
DTU 21 - Building works - Execution of concrete structures - Part 1-2 : general criteria for the selection of materials
- ICS
- 91.010.20;91.080.40
- CCS
- Q13
- 发布
- 2017-06-17
- 实施
- 2017-06-17
Products used perthion gypsum slag cement concrete
- ICS
- 91.100.30
- CCS
- Q13
- 发布
- 2017-04-12
- 实施
- 2017-10-01
Special mortar for cement-based foam insulation board
- ICS
- 91.100.10
- CCS
- Q13
- 发布
- 2017-04-12
- 实施
- 2017-10-01
Method of test for alkali-silica reactivity of aggregates by chemical method
- ICS
- 91.100.01
- CCS
- Q13
- 发布
- 2017-03-25
- 实施
Method of test for alkali-silica reactivity of aggregates by mortar-bar method
- ICS
- 91.100.01
- CCS
- Q13
- 发布
- 2017-03-25
- 实施
本标准规定了轻质抹灰砂浆的术语和定义、分类和标记、技术要求、试验方法、检验规则、产品标志、包装和贮运。 本标准适用于建筑内墙干区非贴砖部位墙体及天花表面抹灰的轻质抹灰砂浆，不适用于厨房和卫生间。
Lightweight plastering mortar
- ICS
- 91.100.10
- CCS
- Q13
- 发布
- 2017-03-10
- 实施
- 2017-06-10
Environmental management for concrete and concrete structures - Part 4: Environmental design of concrete structures
- ICS
- 13.020.10;91.080.40;91.100.30
- CCS
- Q13
- 发布
- 2017-03
- 实施
Method of test for air content of fresh concrete by volumetric method
- ICS
- 91.100.30
- CCS
- Q13
- 发布
- 2017-02-25
- 实施
Method of test for static modulus of elasticity of concrete
- ICS
- 91.100.30
- CCS
- Q13
- 发布
- 2017-02-25
- 实施
Specification for mortar for masonry - Part 1: Rendering and plastering mortar; German version EN 998-1:2016
- ICS
- 91.100.10
- CCS
- Q13
- 发布
- 2017-02
- 实施
Specification for mortar for masonry - Part 2: Masonry mortar; German version EN 998-2:2016
- ICS
- 91.100.10
- CCS
- Q13
- 发布
- 2017-02
- 实施
Concrete - Specification, performance, production and conformity; German version EN 206:2013+A1:2016
- ICS
- 91.100.30
- CCS
- Q13
- 发布
- 2017-01
- 实施
