Q18 装修材料 标准查询与下载

GSA A-A-3003 A-2004 内部用透明和着色喷雾用喷漆

This description covers two types and classes of low VOC, spray applied, clear and pigmented lacquer intended for interior use on properly prepared metal and plastic surfaces, and sealed wood surfaces.

LACQUER, SPRAYING, CLEAR AND PIGMENTED FOR INTERIOR USE

ASTM D7031-04 木材-塑料复合产品的机械和物理性能的评估标准指南

WPCs are intended for use in both structural and non-structural applications. The test methods described within are intended to address products that are manufactured from virgin or recycled wood and thermoplastic sources. These methods provide a reference for the evaluation of several mechanical and physical properties important for structural and non-structural uses of WPCs. 1.1 This guide covers test methods appropriate for evaluating a wide range of performance properties for wood-plastic composite (WPC) products. It was developed from evaluations of both experimental and currently manufactured products, and is not intended to suggest that all the tests listed are necessary or appropriate for each application of a WPC. The user must determine which test methods apply to the particular application being evaluated (see Appendix X1).1.2 Details of manufacturing processes may be proprietary and are beyond the scope of this guide.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

ASTM F1303-04 带背衬片状乙烯地板覆盖物的标准规范

1.1 This specification covers floor covering having a vinyl plastic wear layer with backing. Products may also contain non-PVC specialty performance top layer(s) or intermediate layer(s), or both.1.2 Two types of floor covering based on binder content are covered. The floor covering is intended for use in commercial, light commercial, and residential buildings based on serviceability characteristics. General information and performance characteristics that determine serviceability and recommended use are included in this specification.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.4 The following safety hazards caveat pertains only to the test methods portion, Section 11, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Sheet Vinyl Floor Covering with Backing

NF P61-203:2003 DTU 26.2和DTU 52.1的通用部分.抹灰准条或样板、平板和瓷砖下绝缘内涂层的镀涂.技术规范

Part common to DTU 26.2 and DTU 52.1 - Installation of insulating undercoats under floating screed or plates, slab and under tiles - Technical specifications.

NF P61-202-2:2003 DTU 52.1.施工.专用市场.密封地板.第2部分:特殊条款

DTU 52.1 - Execution of work - Private markets - Sealed flooring - Part 2 : special clauses.

CGSB 1.57-2003-CAN/CGSB-2003 内墙用半光醇酸磁漆

La pr?esente Norme nationale du Canada a ?et?e ?elabor?ee sous les Le CONSEIL CANADIEN DES NORMES est l’organisme de auspices de l’OFFICE DES NORMES G?EN?ERALES DU coordination du Syst`eme national de normes, une f?ed?eration CANADA (ONGC), qui est

Peinture-Email D'Interieur, Semi- Brillante, Aux Resines Alkydes

CGSB 1.203-03-CAN/CGSB-2003 建筑外墙用木器胶乳底漆

La pr?esente norme s’applique `a une peinture-?emulsion (latex) d’impression ext?erieure `a s?echage rapide qui convient `a l’utilisation sur le bois peint et non peint.

Peinture-Emulsion (Latex) D'Impression Exterieure, Pour Bois

CGSB 1.202-2003-CAN/CGSB-2003 内墙用低光泽醇酸磁漆

La pr?esente norme s’applique `a la peinture-?email d’int?erieur, aux r?esines alkydes, peu brillante convenant `a l’utilisation comme couche de finition sur les boiseries et murs int?erieurs non poreux rev?etus d’une peinture primaire, impr?egn?es

Peinture- Email D'Interieur, Peu Brillante, Aux Resines Alkydes

NF P62-114-1/A1:2003 弹性地板覆盖物.耐磨性测定.第1部分:斯图加特试验

Resilient floor coverings - Determination of wear resistance - Part 1 : Stuttgart test.

NF P62-114-2/A1*NF EN 660-2/A1:2003 弹性地板覆盖物.耐磨性测定.第2部分:弗里克-塔博试验

Resilient floor coverings - Determination of wear resistance - Part 2 : Frick-Taber test.

CGSB 1.209-03-CAN/CGSB-2003 内墙用低光泽胶乳涂料

La pr?esente norme s’applique `a la peinture-?emulsion d’int?erieur peu brillante destin?ee `a ?etre utilis?ee sur les murs et les plafonds, qu’ils soient neufs ou d?ej`a peints.

Interior Latex Low Gloss Paint

SANS 515:2003 室内装饰涂料

Specifies the requirements for decorative air-drying paints (other than emulsion paints) for interior use as a finishing coat on metal, wood, sealed plaster walls, composition board and similar materials that have been primed or painted previously. Cover

Decorative paint for interior use

DIN 66084:2003 装潢复合材料的燃烧性能分类

The standard specifies a classification of burning behaviour of upholstered compounds. By applying the standard the basic requirements as laid down in DIN 66080 have to be taken into account accordingly. The classification of upholstered compounds is carried out according to three different methods of test and three standards for testing. The test results provide the basics to the requirements laid down in the different classes.

Classification of burning behaviour of upholstered compounds

ARMY MIL-DTL-43021 F-2003 10000磅容量货物拴住装载粘结剂

This specification covers one type and size load binder of 10,000 pound capacity.

BINDER, LOAD, CARGO TIE-DOWN, 10,000 POUND CAPACITY

DIN EN 13629:2003 木地板.预安装阔叶树材地板

This European Standard specifies the characteristics of solid pre-assembled hardwood boards with grooves and/or tongues for internal as flooring. This standard covers solid hardwood pre-assembled boards with or without surface treatment.

Wood flooring - Solid pre-assembled hardwood board; German version EN 13629:2002

DIN EN 13810-1:2003 木制板材.浮式地板.第1部分:性能规范和要求

This European Standard provides the performance specifications and requirements for wood-based panels used in continuously fully supported non-structural floating floors.

Wood-based panels - Floating floors - Part 1: Performance specifications and requirements; German version EN 13810-1:2002

DIN EN 13228:2003 木地板.包括带联锁系统的地板块的镶木地板构件

Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system; German version EN 13228:2002

DIN EN 13227:2003 木地板.实木拼花地板制品

This European Standard specifies the characteristics of solid lamparquet products for internal use as flooring. It applies to elements. This standard does not apply to panels made from elements, for which a separate standard is in course of preparation. This standard covers products without surface treatment.#,,#

Wood flooring - Solid lamparquet products; German version EN 13227:2002

NF B53-636:2003 木地板.术语

Wood flooring - Terminology.

NF B54-080-1*NF EN 13810-1:2003 木基板材.悬浮地板.第1部分:性能规范和要求

Wood-based panels - Floating floors - Part 1 : performance specifications and requirements.