Q20 筑路材料 标准查询与下载

DIN EN 13108-1:2006 沥青混合物.材料规范.第1部分:沥青混凝土

Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete; English version of DIN EN 13108-1:2006-08

DIN EN 13108-3:2006 沥青混合物.材料规范.第3部分:软沥青

This standard specifies requirements for mixtures of the mix group soft asphalt. It deals also with the selection of the constituent materials. Soft asphalt is a mixture of soft bitumen and aggregate. The concept covers a wide range of bitumen grades and different compositions. Soft asphalt can be produced in ordinary hot mix asphalt plants as well as in simpler, mobile equipment specially constructed for the purpose of producing soft asphalt. The use of a soft binder ensures sufficient flexibility and self-healing effects for use on low volume roads and on roads with low stability.#,,#

Bituminous mixtures - Material specifications - Part 3: Soft Asphalt; English version of DIN EN 13108-3:2006-08

DIN EN 13108-5:2006 沥青混合物.材料规范.第5部分:石头沥青砂胶

This Standard specifies requirements for mixtures of the mix group stone mastic asphalt. It deals also with the selection of the constituent materials. Stone mastic asphalt comprises gap-graded asphalt mixtures with bitumen as a binder, which are composed of a coarse crushed aggregate skeleton bound with a mastic mortar. Stone mastic asphalt is not pourable. After laying stone mastic asphalt mixture has to be compacted. The ratio of crushed to natural fine aggregate is normally 1:1. Stone mastic asphalt can be used for most kinds of traffic and in most kinds of climates on roads, airfields and other trafficked areas.

Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt; English version of DIN EN 13108-5:2006-08

DIN EN 13108-4:2006 沥青混合物.材料规范.第4部分:热轧沥青

Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt; English version of DIN EN 13108-4:2006-08

DIN EN 13108-2:2006 沥青混合物.材料规范.第2部分:极薄层沥青混凝土

Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers; English version of DIN EN 13108-2:2006-08

DIN EN 14227-13:2006 液力粘结混合料.规范.第13部分:液压道路粘结剂处理的土壤

This European Standard specifies soils treated by hydraulic road binder for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification.

Hydraulically bound mixtures - Specifications - Part 13: Soil treated by hydraulic road binder English version of DIN EN 14227-13:2006-08

DIN EN 14227-14:2006 液力粘结混合料.规范.第14部分:飞尘处理的土壤

This European Standard specifies soils treated by fly ash for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification. This European Standard covers soils treated by siliceous or calcareous fly ash conforming to EN 14227-4. It does not cover soils treated by fly ash as part of cement or hydraulic road binder conforming to EN 197-1 or ENV 13282, requirements for which are given in EN 14227-10 and EN 14227-13 respectively.#,,#

Hydraulically bound mixtures - Specifications - Part 14: Soil treated by fly ash English version of DIN EN 14227-14:2006-08

DIN EN 14227-10:2006 液力粘结混合料.规范.第10部分:水泥处理的土壤

This European Standard specifies soil treated by cement for the pavement layers of roads, airfields and other trafficked areas and specifies the requirements for its constituents, composition and laboratory performance classification. It provides for the use of aggregates with grading curves, which are not constrained by the limits defined in EN 14227-1 for cement bound granular mixtures. This European Standard does not specify requirements for strength prior to trafficking or frost resistance, which might be covered by requirements at the place of use. Production control recommendations are included in the informative Annex B.

Hydraulically bound mixtures - Specifications - Part 10: Soil treated by cement English version of DIN EN 14227-10:2006-08

DIN EN 14227-11:2006 液力粘结混合料.规范.第11部分:石灰处理的土壤

This European Standard applies to the treatment with lime of natural soils and other materials for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification. Two types of treatment are covered, improvement and stabilization. This European Standard relates only to lime-treated layers for trafficked areas (as opposed to lime columns or piles for example) but can be used for other civil engineering purposes although additional requirements might be necessary to complement or replace those required by this European Standard.#,,#

Hydraulically bound mixtures - Specifications - Part 11: Soil treated by lime English version of DIN EN 14227-11:2006-08

DIN EN 14227-12:2006 液力粘结混合料.规范.第12部分:熔渣处理的土壤

Hydraulically bound mixtures - Specifications - Part 12: Soil treated by slag English version of DIN EN 14227-12:2006-08

DIN EN 13108-7:2006 沥青混合物.材料规范.第7部分:多孔渗水沥青

This European Standard specifies requirements for mixtures of the mix group porous asphalt. It also deals with the selection of the constituent materials. Porous asphalt can be used in most kinds of traffic and climates on roads, airfields and other trafficked areas. It is used for surface courses. NOTE: The layer thickness should be between 2,2 D and 4 D, where D is the upper sieve size of the aggregate in the mixture. Porous asphalt can be laid in two or more layers.#,,#

Bituminous mixtures - Material specifications - Part 7: Porous Asphalt; English version of DIN EN 13108-7:2006-08

JIS A 5032:2006 来自城市生活垃圾和污水污泥的公路建筑的熔化凝固炉渣材料

この規格は，一般の道路用材料としての加熱アスフアルト混合物用骨材及び路盤材として用いる溶融スラグについて品質，試験方法，検査，表示，報告などを規定する。備考1.溶融スラグとは，主に一般廃棄物，下水汚泥などの溶融施設において，有効利用を目的に製造される骨材である。また，溶融スラグは溶融固化物と同義語である。 なお，適用範囲には，溶融施設又は別施設で磁選，粒度調整等の加I又は改質処理を行った溶融スラグも含む。なお，溶融スラグは，水砕スラグ，空冷スラグ及び徐冷スラグに分類される。ここでは，空冷スラグと徐冷スラグの両方を徐冷スラグと称する。2.ここでいう一般廃棄物の溶融固化施設から産出される溶融スラグには，自治体等が一般廃棄物の溶融固化施設で処理することを認めた指定の産業廃棄物を一般廃棄物と混合処理している場合に産出される溶融スラグを合めてもよい。

Melt-solidified slag material for road construction derived from municipal solid waste and sewage sludge

NF P98-897-9:2006 冷用接缝密封胶.试验方法.第9部分:接缝密封胶的功能试验

Cold applied joint sealants - Test methods - Part 9 : function testing of joint sealants.

DIN EN 13108-21:2006 沥青混合物.材料规范.第21部分:工厂产品控制

This standard specifies Factory Production Control requirements for use by the manufacturers of bituminous mixtures. The Factory Production Control has the quality aim to give adequate assurance that the asphalt mixtures conform with the relevant technical specifications. The Factory Production Control is required to be applied to all harmonised elements of European Harmonised Standards and European Technical Approvals for bituminous mixtures if the CE mark of conformity is to be affixed. The system may also be applied to non- Harmonised elements and to situations where CE marking is not mandatory.

Bituminous mixtures - Material specifications - Part 21: Factory Production Control; English version of DIN EN 13108-21:2006-07

DIN EN 13108-20:2006 沥青混合物.材料规范.第20部分:类型试验

To verify whether a mix composition can deliver a mix that will fulfil the product requirements laid down in the product standards.

Bituminous mixtures - Material specifications - Part 20: Type Testing; English version of DIN EN 13108-20:2006-07

DIN EN 13924:2006 沥青和沥青粘合剂.硬质路面等级沥青的规范

Bitumen and bituminous binders - Specifications for hard paving grade bitumens; English version of DIN EN 13924:2006-07

BS EN 14227-11:2006 非粘结和液力粘结混合料.规范.石灰处理的土壤

This European Standard applies to the treatment with lime of natural soils and other materials for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification. Two types of treatment are covered, improvement and stabilization. This European Standard relates only to lime-treated layers for trafficked areas (as opposed to lime columns or piles for example) but can be used for other civil engineering purposes although additional requirements might be necessary to complement or replace those required by this European Standard.

Unbound and hydraulically bound mixtures - Specifications - Soil treated by lime

BS EN 14227-13:2006 液力粘结混合料.规范.液压道路粘合剂处理的土壤

This European Standard specifies soils treated by hydraulic road binder for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification.

Hydraulically bound mixtures - Specifications - Soil treated by hydraulic road binder

BS EN 14227-14:2006 液力粘结混合料.规范.飞尘处理的土壤

This European Standard specifies soils treated by fly ash for roads, airfields and other trafficked areas and specifies the requirements for their constituents, composition and laboratory performance classification. This European Standard covers soils treated by siliceous or calcareous fly ash conforming to EN 14227-4. It does not cover soils treated by fly ash as part of cement or hydraulic road binder conforming to EN 197-1 or ENV 13282, requirements for which are given in EN 14227-10 and EN 14227-13 respectively.

Hydraulically bound mixtures - Specifications - Soil treated by fly ash

BS EN 14227-10:2006 液力粘结混合料.规范.水泥处理的土壤

This European Standard specifies soil treated by cement for the pavement layers of roads, airfields and other trafficked areas and specifies the requirements for its constituents, composition and laboratory performance classification. It provides for the use of aggregates with grading curves, which are not constrained by the limits defined in EN 14227-1 for cement bound granular mixtures. This European Standard does not specify requirements for strength prior to trafficking or frost resistance, which might be covered by requirements at the place of use. Production control recommendations are included in the informative Annex B.

Hydraulically bound mixtures - Specifications - Soil treated by cement