Q27 粘结材料 标准查询与下载

ASTM C821-09 与火山灰掺和用石灰的标准规范

1.1 This specification covers all types of commercial hydrated lime such as: high-calcium, magnesium, or dolomitic-hydrated lime. By-product limes and slaked quick limes in dry, wet, or slurried form are also included. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Lime for Use with Pozzolans

ASTM E990-09 蜂窝状夹层遮蔽板用芯层拼接胶粘剂的标准规范

1.1 This specification covers core-splice adhesive for use with nonmetallic honeycomb cores in the fabrication of honeycomb sandwich panels used in relocatable structures. The adhesive shall be used for new production or depot repair. The adhesive shall be suitable for forming bonds that can withstand long combinations of stress, temperature, and relative humidity expected to be encountered in service. The adhesive shall be used for bonding core segments and for bonding core segments to edge members and to integral members in a honeycomb sandwich panel. The adhesive shall not allow the transfer of water from one part of the panel to another either through or along the line of the adhesive. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 The following precautionary caveat pertains only to the test method portion, Section 5, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels

KS L 9012-2008 水处理用生石灰和熟石灰

이 표준은 모든 수 처리용 석회에 대하여 규정한다.

Quicklime and hydrated lime for water treatment

KS L 9010-2008 生产硅砖用生石灰和熟石灰

이 표준은 규석 벽돌 제조에 사용하는 생석회 및 소석회에 대하여 규정한다.

Quick lime and hydrated lime for silica brick manufacture

KS L 9011-2008 生产硅酸钙用生石灰和熟石灰

이 규격은 규산 칼슘 제품의 제조에 사용하는 생석회 및 소석회에 대하여 규정한다.

Quicklime and hydrated lime for calcium silicate products

DIN EN 13589 Berichtigung 1:2008 沥青和沥青粘合剂.用力延展性法测定改良沥青的拉伸性能.技术勘误DIN EN 13589-2008

Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method; German version EN 13589:2008, Corrigendum to DIN EN 13589:2008-06

BS DD CEN/TS 15324:2008 沥青和沥青粘合剂.使用低频振动模式中动态剪切流变计测定基于低剪切粘度的粘滞温度

Bitumen and bituminous binders - Determination of equiviscous temperature based on low shear viscosity using a dynamic shear rheometer in low frequency oscillation mode

JC/T 550-2008 聚氯乙烯块状塑料地板胶粘剂

本标准规定了聚氯乙烯块状塑料地板胶粘剂（以下简称胶粘剂）的分类和标记、要求、试验方法、检验规则、包装、标志和贮存。 本标准适用于粘贴聚氯乙烯块状塑料地板的胶粘剂。

Adhesives for polyvinyl chloride floor tiles

JC/T 449-2008 镁质胶凝材料用原料

本标准规定了镁质胶凝材料用原料的技术要求、试验方法、检验规则、产品质量证明书、包装与标志、运输与贮存。 本标准适用于由菱镁矿（MgCO）经轻烧、粉磨而制成的轻烧氧化镁以由盐卤液经干燥处理制得的氯化镁，作为镁质胶凝材料的原料。

Raw materials for magnesia cement

NF P61-602:2008 瓷砖粘结剂.试验用混凝土板

Adhesives for tiles - Concrete slabs for tests.

DIN EN 1903:2008 胶粘剂.塑料、橡胶地板覆层或墙面覆层用胶粘剂的试验方法.加速老化后尺寸变化的测定

This European Standard specifies a test method that measures the dimensional changes of a plastic or rubber floor or wall covering bonded to a given substrate after accelerated ageing. The term "wall covering" does not include any type of wallpaper.

Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing; English version of DIN EN 1903:2008-06

BS EN 15368:2008+A1:2010 非结构用途的液压粘合料.定义,规范和合格标准

This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products. This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.

Hydraulic binder for non-structural applications. Definition, specifications and conformity criteria

NF T66-006:2008 沥青和沥青粘合剂.使用压力延展法测定改良沥青的拉伸性能.

Bitumen and bituminous binders - Determination of the tensile properties of modified bitumen by the force ductility method.

DIN EN 13971:2008 碳酸盐石灰材料.活度测定.盐酸电位滴定法

This European Standard specifies a method for the determination of the speed and effectiveness of the neutralizing potential of calcium carbonate and calcium magnesium carbonate liming materials by potentiometric titration with hydrochloric acid. This method is applicable only to liming materials with a maximum particle size of 6,3 mm. NOTE The type of liming material should be identified according to EN 14069 and the particle size should be determined according to EN 12948.

Carbonate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid; English version of DIN EN 13971:2008-05

DIN EN 12945:2008 石灰材料.中和值测定.滴定法

This European Standard specifies two methods for the determination of the neutralizing value (NV) of liming materials. Method A is applicable to all liming materials except silicate liming materials and liming materials with more than 3 % P205. Method B is applicable to all liming materials except products with more than 3 % mass fraction P205, and calcined and slaked products of carbonate origin. NOTE The methods described in ISO 6596 and ISO 7497 can be used for the determination of P205 content (see [2] and [3]).

Liming materials - Determination of neutralizing value - Titrimetric methods; German version EN 12945:2008

SANS 459:2008 化学和冶金用石灰

Covers 3 types of quicklime: calcium, magnesian and dolomitic as well as 3 types of hydrated lime: calcium (3 grades), magnesian and dolomitic.

Lime for chemical and metallurgical purposes

NF P61-610:2008 瓷砖粘合剂.要求、合格评估、分类和标记

Adhesives for tiles - Requirements, evaluation of conformity, classification and designation.

NF P61-607:2008 瓷砖用粘合剂.分散胶粘剂剪切粘接强度的测定

Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives.

DIN EN 15368:2008 非结构材料用水硬性粘合料.定义、规范和合格标准

This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products. This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.

Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria; German version EN 15368:2008

JIS A 6903 AMD 2:2008 白云石质灰泥(修改件2)

Dolomite plaster (Amendment 2)