Q27 粘结材料 标准查询与下载

BS EN 1346:2007 瓷砖用粘合剂.敞露时间的测定

This European Standard specifies the test method for the determination of the open time of ceramic tile adhesives. This European Standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of open time

BS EN 1348:2007 瓷砖用粘合剂.水泥粘合剂的抗张粘合强度的测定

This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

BS EN 15416-3:2007 负荷轴承木结构用粘合剂.试验方法.第3部分:带弯曲剪切载荷的试样在循环气候条件下的蠕变试验

This European standard specifies a method for determining the creep deformation of bonded specimens loaded in bending shear. It is applicable to adhesives used in load-bearing timber structures. It is suitable for the following applications: a) for assessing the compliance of adhesives to prEN 15425 Adhesives, One component polyurethane, for load bearing timber structures - Classification and performance requirements; b) for assessing the suitability and quality of adhesives for load-bearing timber structures. This test is intended primarily to obtain performance data for the classification of adhesives for load bearing timber structures according to their suitability for use in defined climatic environments. This method is not intended to provide numerical design data and does not necessarily represent the performance of the bonded member in service. It is not applicable for assessing the suitability of adhesives for the manufacture of woodbased panels.

Adhesives for load bearing timber structures - Test methods - Creep deformation test at cyclic climate conditions with specimens loaded in bending shear

BS EN 1324:2007 瓷砖用粘合剂.分散粘合剂剪切粘接强度的测定

This European Standard specifies the test method for the determination of the shear adhesion strength of dispersion ceramic tile adhesives. This European Standard applies to all dispersion ceramic tile adhesives for internal tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

NY/T 1525-2007 乳胶黏合纤维垫

本标准规定了胶乳黏合纤维垫的要求、试验方法、检验规则及包装、标志、贮存和运输。 本标准适用于加入配合剂的天然胶乳、合成胶乳或两者的混合胶料作黏合剂，对椰棕、剑麻、山棕纤维进行黏合，并经硫化的纤维垫；不一定适用于用合成树脂作黏合剂对椰棕、剑麻、山棕纤维进行黏合的纤维垫。

Fibre cushion rubberized by latex

KS L 5508-2007 混合石灰用煤飞尘和火山灰

이 규격은 가소성 모르타르, 비가소성 혼합물 및 석회 포졸란 반응에 영향을 미치는 기타 혼

Fly ash and other pozzolans for use with lime

BS EN 15275:2007 结构粘合剂.土木工程和建筑结构中同轴金属组件用厌氧粘合剂的特性

This European Standard specifies requirements and test methods for the characterisation of anaerobic adhesives intended for the general assembly of co-axial metallic elements in building and civil engineering structures including fasteners- threaded and otherwise, pipes and tubes. It is applicable to single adhesives and systems (kits) comprising adhesives, activators and/or primers for both internal and external construction elements. This European Standard only applies to metallic substrates.

Structural adhesives. Characterisation of anaerobic adhesives for co-axial metallic assembly in building and civil engineering structures

DIN EN 1323:2007 瓷砖用粘合剂.试验用混凝土板

This European Standard specifies the substrate (concrete slab) to be used for the determination of the properties of adhesives for tiles. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc), if they do not adversely affect the stones.

Adhesives for tiles - Concrete slabs for tests; English version of DIN EN 1323:2007-11

DIN EN 1348:2007 瓷砖用粘合剂.水泥粘合剂用抗张粘合强度的测定

This European Standard specifies a method for the determination of the tensile adhesion strength of cementitious ceramic tile adhesives. This European Standard is applicable to all cementitious adhesives and cementitious adhesives with separate components for internal and external ceramic tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives; English version of DIN EN 1348:2007-11

DIN EN 13454-2:2007 地板层找平用基于硫酸钙的粘合剂、复合粘合剂和工厂制混合物.第2部分:试验方法

This European Standard describes the test methods for binders and composite binders for floor screeds based on calcium sulfate specified in prEN 13454-1. This European Standard describes the test methods for factory made mixtures for floor screeds based on calcium sulfate specified in EN 13813. This European Standard describes reference test methods. If other than these methods and conditions are used, it is necessary to show that they give results equivalent to those given by the reference methods. In the event of a dispute, only the reference test method is used.

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods (includes Amendment A1:2007); English version of DIN EN 13454-2:2007-11

DIN EN 1324:2007 瓷砖用粘合剂.分散胶粘剂剪切粘接强度的测定

This European Standard specifies the test method for the determination of the shear adhesion strength of dispersion ceramic tile adhesives. This European Standard applies to all dispersion ceramic tile adhesives for internal tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives; English version of DIN EN 1324:2007-11

DIN EN 12004:2007 瓷砖用粘合剂.要求、一致性评估、分类和标识

This European Standard is applicable to ceramic tile adhesives for internal and external tile installations on walls, floors and ceilings. This standard 9ives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives. This European Standard specifies the values of performance requirements for ceramic tile adhesives (cementitious, dispersion and reaction resin adhesives). This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

Adhesives for tiles - Requirements, evaluation of conformity, classification and designation; English version of DIN EN 12004:2007

DIN EN 1308:2007 瓷砖用粘合剂.滑动性的测定

This European Standard specifies the method for the determination of the resistance to slip of a tile applied to an adhesive on a vertical surface. This European Standard applies to all ceramic tile adhesives for internal and external tihng on walls. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of slip; English version of DIN EN 1308:2007-11

DIN EN 1346:2007 瓷砖用粘合剂.敞露时间的测定

This European Standard specifies the test method for the determination of the open time of ceramic tile adhesives. This European Standard is applicable to all ceramic tile adhesives for internal or external tile installations on walls and floors. This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles. NOTE Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Adhesives for tiles - Determination of open time; English version of DIN EN 1346:2007-11

NF P72-410-2:2007 基于硫酸钙找平层用粘合剂、复合粘合剂和工厂制混合物.第2部分:试验方法

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2 : test methods.

NF P72-410-2/IN1:2007 硫酸钙基找平层用粘合剂、复合粘合剂和工厂制混合物.第2部分:试验方法

Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2 : test methods.

ISO 13007-2:2005/Cor 1:2007 瓷砖.泥浆和粘合剂.第2部分:粘合剂的试验方法.技术勘误1

This standard is Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives; Technical Corrigendum 1

Ceramic tiles - Grouts and adhesives - Part 2: Test methods for adhesives; Technical Corrigendum 1

KS L 8510-2007 副产石灰砖

이 규격은 폐석회나 폐석분을 주원료로 하고 경화제를 혼합하여 진동ㆍ압축 성형하고, 상온 양

By-product lime brick

AWWA B202-2007 生石灰和熟石灰

This standard describes pebble, lump, and ground quicklime and hydrated lime for use in water supply service. The purpose of this standard is to provide the minimum requirements for quicklime and hydrated lime, including physical, chemical, packaging, shipping, and testing requirements.

Quicklime and Hydrated Lime

ASTM D7281-07 通过房顶隔膜测定水分迁移阻力的标准试验方法

This test method provides a means of evaluating roof membranes, seams, and laps for resistance to water migration from standing water on the roof. This test method evaluates roof membranes when first applied and also after simulated deterioration caused by the ultraviolet energy of the sun. 1.1 This test method covers the determination of water migration resistance of roof membranes including built-up roof membranes, modified bitumen, and single ply roof membranes. The procedures were developed to determine the potential for leakage of water through the roof membranes resulting from a standing head of water and when pressurized with air from the underside.1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Water Migration Resistance Through Roof Membranes