Q32 特种陶瓷 标准查询与下载

BS ISO 20507:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 词汇

Fine ceramics (advanced ceramics, advanced technical ceramics). Vocabulary

BS ISO 18560-1:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 在室内光环境下使用试验室法对半导体光催化材料空气净化性能的试验方法. 甲醛的清除

Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment. Removal of formaldehyde

BS ISO 17138:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 室温下陶瓷复合材料的机械性能. 挠曲强度的测定

Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of flexural strength

ISO 20507:2014 细陶瓷(高级陶瓷、高级工业陶瓷).词汇

Fine ceramics (advanced ceramics, advanced technical ceramics) - Vocabulary

JIS R 1683:2014 用原子力显微镜方法测定陶瓷薄膜表面粗糙度的试验方法

Test method for surface roughness of ceramic thin films by atomic force microscopy

JC/T 2247-2014 硅酸锆研磨介质球

本标准规定了硅酸锆研磨介质球的术语和定义、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。本标准适用于尺寸介于Φ0.5 mm~Φ15 mm、硅酸锆原料质量分数大于60%的研磨介质球。

Zirconium silicate grinding media ball

JC/T 2248-2014 羟基磷灰石类陶瓷 钾、镁、钠、锶、锌、砷、镉、汞、铅、氟、氯的测定

本标准规定了羟基磷灰石类陶瓷中钾、镁、钠、锶、锌、砷、镉、汞、铅、氟、氯共11种元素的测定方法。本标准适用于羟基磷灰石、β-磷酸三钙以及由它们掺杂衍生的磷酸钙盐陶瓷和羟基磷灰石-磷酸三钙复合材料等。测定范围见表1。

Determination of potassium, magnesium, sodium, strontium, zinc, arsenic, cadmium, mercury, lead, fluorine and chlorine in hydroxyapatite ceramics

JC/T 2246-2014 精细陶瓷覆层厚度试验方法 磨坑法

本标准规定了以磨坑法测定涂覆层厚度的试验方法,包括球面凹坑的研磨和该凹坑的显微镜观察测量。

Fine ceramics (advanced ceramics, advanced technical ceramics).Determination of coating thickness by crater-grinding method

BS ISO 17942:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 氮化硼粉末的化学分析方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of boron nitride powders

BS ISO 17947:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 氮化硅细粉的化学分析方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Methods for chemical analysis of fine silicon nitride powders

BS ISO 17142:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 大气压力环境下空气中陶瓷复合材料的机械性能. 恒幅下疲劳性能的测定

Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude

BS ISO 17140:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 室温下陶瓷复合材料的机械性能. 恒定振幅下疲劳特性的测定

Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at room temperature. Determination of fatigue properties at constant amplitude

BS ISO 17861:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 在潮湿条件下精细陶瓷薄膜光谱透射率的测量方法

Fine ceramics (advanced ceramics, advanced technical ceramics). Measurement method of spectral transmittance of fine ceramics thin films under humid condition

BS ISO 18061:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 半导体光催化材料的抗病毒活性的测定. 采用噬菌体Q-β的试验方法

Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics). Determination of antiviral activity of semiconducting photocatalytic materials. Test method using bacteriophage Q-beta

BS ISO 17139:2014 精细陶瓷 (高级陶瓷, 高级工业陶瓷). 陶瓷复合材料的热物理性能. 热膨胀的测定

Fine ceramics (advanced ceramics, advanced technical ceramics). Thermophysical properties of ceramic composites. Determination of thermal expansion

ISO 17142:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 大气压力环境下空气中陶瓷复合材料的机械性能. 恒幅下疲劳性能的测定

This International Standard specifies the conditions for the determination of properties at constant- amplitude of load or strain in uniaxial tension/tension or in uniaxial tension/compression cyclic fatigue of ceramic matrix composite materials (CMCs) with fibre reinforcement for temperature up to 1700 °C in air at atmospheric pressure. This International Standard applies to all ceramic matrix composites with fibre reinforcement, unidirectional (1D), bi-directional (2D), and tri-directional (xD, where 2 < x ≤ 3). The purpose of this International Standard is to determine the behaviour of CMC when subjected to mechanical fatigue and oxidation simultaneously. Tests for the determination of fatigue properties at high temperature in inert atmospheres differ from those in oxidative atmospheres. Contrary to an inert atmosphere, damage in an oxidative atmosphere accumulates due to the influence of purely mechanical fatigue and to chemical effects of the material’s oxidation.

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude

ISO 17139:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 陶瓷复合材料的热物理性能. 热膨胀的测定

This International Standard describes methods for the determination of linear thermal expansion characteristics of ceramic matrix composite materials up to 2300 K, and is applicable to 1D, 2D, and nD materials. The method describes general principles of construction, calibration, and operation of the equipment.

Fine ceramics (advanced ceramics, advanced technical ceramics) - Thermophysical properties of ceramic composites - Determination of thermal expansion

ISO 17140:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 室温环境下陶瓷复合材料的机械性能. 恒幅下疲劳性能的测定

This International Standard specifies the conditions for the determination of properties at constantamplitude of load or strain in uniaxial tension/tension or in uniaxial tension/compression cyclic fatigue of ceramic matrix composite materials (CMCs) with fibre reinforcement at room temperature. This International Standard applies to all ceramic matrix composites with fibre reinforcement, unidirectional (1D), bi-directional (2D), and tri-directional (xD, where 2 < x ≤ 3).

Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude

ISO 17861:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 在潮湿条件下精细陶瓷薄膜光谱透射率的测量方法

This International Standard specifies a measurement method of spectral transmittance of fine ceramics thin films under humid condition. This International Standard provides test methods that will easily and accurately evaluate changes in optical properties of fine ceramic coatings in a humid atmosphere due to water adsorption.

Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement method of spectral transmittance of fine ceramics thin films under humid condition

ISO 18061:2014 精细陶瓷(高级陶瓷, 高级工业陶瓷). 半导体光催化材料的抗病毒活性的测定. 采用噬菌体Q-β的试验方法

Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Determination of antiviral activity of semiconducting photocatalytic materials - Test method using bacteriophage Q-beta