Q36 玻璃纤维 标准查询与下载

JC/T 590-2005 过滤用玻璃纤维针刺毡

本标准规定了过滤用玻璃纤维针刺毡的术语和定义、标记、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以无碱玻璃纤维为原料，含增强玻璃纤维基布为衬底的过滤用玻璃纤维针刺毡。

Glass fiber needled felt for filter

JC/T 173-2005 玻璃纤维防虫网布

本标准规定了玻璃纤维防虫网布(以下简称防虫网布)的术语和定义、分类和代号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以连续玻璃纤维纱经绞织涂塑或以连续玻璃纤维单纱涂塑再经平织和热定型而成的网状织物。该产品主要用于需要防虫、隔离、装饰等的场所。

Glass fibre insect screening

JC/T 556-2005 磨碎玻璃纤维

本标准规定了磨碎玻璃纤维的分类与代号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于由无碱或中碱玻璃纤维原丝经粉碎、碾膜、筛选等过程而制成的极短的纤维，该产品主要用于热固性或热塑性树脂的增强材料。

Milled glass fiber

JC/T 670-2005 矿物棉装饰吸声板

Mineral wool decorative sound-absorbing panels

JC/T 980-2005 纤维水泥电缆管及其接头

Fiber cement cable pipe and its joints

JC/T 174-2005 无碱玻璃纤维带

本标准规定了无碱玻璃纤维带(以下简称无碱带)的分类和代号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于以无碱玻璃纤维纱为原料经织造而成的带状制品。

E-Glass Fiber Tape

AWWA M45-2005 玻璃纤维管道设计.第2版附录2006年11月9日

This standard provides the requirements for coal-tar protective exterior coatings and interior linings used in the potable water supply industry for buried steel water pipelines.

Fiberglass Pipe Design Second Edition; Addendum: 09/11/2006

ASTM D578-05 玻璃纤维丝标准规范

1.1 This specification covers the requirements for continuous fiber and staple fiber glass strands, including single, plied and multiple wound. It also covers textured glass fiber yarns.1.2 Glass fibers are produced having various compositions. General applications are identified by means of a letter designation. The letter designation represents a family of glasses that have provided acceptable performance to the end-user in the intended application. For example, the composition limits stated for E-Glass in this specification representing the glass fiber family for general and most electrical applications is designated by the letter E. Military specifications, such as, MIL-R-60346, recognize the composition limits described in this specification as meeting the respective requirements for E-Glass strands used in reinforced plastic structure applications. This specification is intended to assist ultimate users by designating the general nomenclature for the strand products that are generally manufactured in the glass fiber industry.1.3 Glass fiber strands have a variety of general uses under specific conditions, such as high physical or chemical stress, high moisture, high temperature, or electrical environments. Property requirements under specific conditions are agreed upon between the purchaser and the supplier. Electrical property requirements vary with specific end-use applications. For printed circuit board applications, other requirements may be needed such as the use of Institute for Interconnecting and Packaging Electronic Circuits (IPC) Specification EG-4412 for finished fabric woven from E-Glass for printed circuit boards, or Specification MIL-P-13949 for printed wiring boards applicable to glass fabric base.1.4 This specification shows the values in both SI units and inch-pound units. "SI" units is the technically correct name for the system of metric units known as the International System of Units." Inch-pound units" is the technically correct name for the customary units used in the United States. The values stated in either acceptable metric units or in other units shall be regarded separately as standard. The values expressed in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining in any way.1.5 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates.1.6 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include finished glass fabrics, unfinished glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Glass Fiber Strands

ASTM D578/D578M-05(2011)e1 玻璃纤维束的标准规格

1.1 This specification covers the requirements for continuous fiber and staple fiber glass strands, including single, plied and multiple wound. It also covers textured glass fiber yarns. This specification is intended to assist ultimate users by designating the general nomenclature for the strand products that age generally manufactured in the glass fiber industry. 1.2 Glass fibers are produced having various compositions. General applications are identified by means of a letter designation. The letter designation represents a family of glasses that have provided acceptable performance to the end-user in the intended application. For example, the composition limits stated for E-Glass in this specification representing the glass fiber family for general and most electrical applications is designated by the letter E. Military specifications, such as, MIL-R-60346, recognize the composition limits described in this specification as meeting the respective requirements for E-Glass strands used in reinforced plastic structure applications. 1.3 Glass fiber strands have a variety of general uses under specific conditions, such as high physical or chemical stress, high moisture, high temperature, or electrical environments. Property requirements under specific conditions are agreed upon between the purchaser and the supplier. Electrical property requirements vary with specific end-use applications. For printed circuit board applications, other requirements may be needed such as the use of Institute for Interconnecting and Packaging Electronic Circuits (IPC) Specification EG 4412 A for finished fabric woven from E-Glass for printed circuit boards, or Specification MIL-P-13949 for printed wiring boards applicable to glass fabric base. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates. 1.6 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include finished glass fabrics, unfinished glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Glass Fiber Strands

JC/T 935-2004 玻璃纤维工业用玻璃球

Glass marble for glassfiber production

JC 935-2004 玻璃纤维工业用玻璃球

Glass marble for glassfiber production

NF T57-160-2*NF ISO 3597-2:2004 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第2部分:弯曲强度的测度

Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 2 : determination of flexural strength.

NF T57-160-1*NF ISO 3597-1:2004 纺织玻璃纤维增强塑料.无捻粗纱增强树脂棒力学性能的测定.第1部分:棒的一般考虑和制备

Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced resin - Part 1 : general considerations and preparation of rods.

ASTM C1559-04(2009) 测定玻璃纤维绝缘卷材芯吸性的试验方法(飞机用)

The tendency of the insulation toward wicking can result in an increase in weight and a resultant potential degradation in the properties of the insulation.1.1 This test method covers a laboratory procedure for evaluating the tendency of, aircraft type, fibrous glass blanket insulation to wick water. 1.2 The wicking characteristics of materials may be affected by environmental conditions such as temperature and humidity. Values obtained as a result of this test method may not adequately describe the wicking characteristics of materials subject to conditions other than those indicated in the test method. (See Specification C 800.) 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)

ASTM D3656-04 涂乙烯的玻璃纤维纱编织的防虫罩及排气孔遮布的标准规范

1.1 This specification covers the requirements for vinyl-coated glass yarn insect screening and louver cloth.1.2 This specification is intended to assist ultimate users by designating the sizes and types of these products that are generally available in the industry.1.3 This specification shows the terminology and requirements for:1.3.1 Commercial standard vinyl-coated glass yarn insect screening designed and woven primarily for installation in or on any dwelling, patio, screening enclosure, building, or structure for the purpose of keeping out flies, mosquitoes, and most insects.1.3.2 Vinyl-coated glass yarn louver cloth used extensively in soffit and louver vents to keep out most large insects, birds, and airborne litter, while at the same time providing for adequate ventilation and air circulation.1.4 This specification shows the values in both SI units and inch-pound units. "SI units" is the technically correct name for a system of metric units known as the International System of Units. "Inch-pound units" is the technically correct name for the customary units used in the United States. The values stated in inch-pound units are to be regarded as the standard. The value in SI units are provided for information only.1.5 The following precautionary caveat pertains only to the test methods portions, Sections 8-19, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns

ASTM D580-04 坯布机织玻璃纤维带的标准规范

1.1 This specification primarily covers greige tapes and webbings woven from "E" electrical classification glass fiber yarns. This specification can also be applied to tapes and webbings made of other glass fiber grades upon agreement between the purchaser and the supplier. 1.2 This specification is intended to assist ultimate users by designating the types of these products that are typical in the industry. This specification permits the application of organic materials to the glass fiber yarn during manufacture that helps facilitate weaving. When used as permitted in this specification, such materials will not interfere with the intended end use requirements.1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Greige Woven Glass Tapes and Webbings

ASTM D4389/D4389M-04(2010)e1 粗纱精制玻璃布的标准规范

1.1 This specification primarily covers glass fabrics woven from “E” electrical continuous glass fiber rovings that are intended primarily as a reinforcing material in laminated plastics for structural use. 1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for woven roving glass fiber fabrics. This specification permits the application of sizing materials to the glass fiber roving during manufacture that helps facilitate weaving. When used as permitted in this specification, such materials are compatible with the resin matrix as specified in the contracting instrument. Note 18212;Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure, they need not be compatible with the subsequent resin matrix. 1.3 Units8212;The values stated in either SI units or inch-pound units are to be regarded as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. Note 28212;This specification is one of a series to provide a substitute for the following Military Specifications: MIL-Y-1140H Yarn, Cord, Sleeving, Cloth, and Tape-Glass MIL-C-9084C Cloth, Glass Finished for Resin Laminates MIL-C-19663C Cloth, Glass, Woven Roving for Plastic Laminates

Standard Specification for Finished Glass Fabrics Woven From Rovings

ASTM D579-04 原色玻璃织物标准规范

1.1 This specification covers greige fabrics woven from "E" electrical glass fiber yarns. This specification can also be applied to fabrics made of other glass fiber types as agreed upon between the purchaser and the supplier.1.2 This specification specifies the terminology, definitions, general requirements and physical requirements for greige glass fiber fabrics. This specification permits the application of organic materials to the glass fiber yarn during manufacture that helps facilitate weaving.1.3 This specification shows the values in both SI units and in inch-pound units. "SI units" is the technically correct name for the system of metric units known as the International System of Units. "Inch-pound units" is the technically correct name for the customary units used in the United States. The values in SI units are provided as information only; the values stated in inch-pound units are to be regarded as standard.1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates.1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include finished glass fabrics, unfinished glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Greige Woven Glass Fabrics

ASTM D4029-04 精整机织玻璃织物标准实施规程

1.1 This specification covers finished fabrics woven from "E" electrical glass fiber yarns that are intended as a reinforcing material in laminated plastics for structural use. This specification can also be applied to fabrics made of other glass types as agreed upon between the purchaser and the supplier.1.2 This specification specifies the terminology, definitions, general requirements, and physical requirements for finished woven glass fabrics This specification permits the application of sizing materials to the glass fiber yarn during manufacture that helps facilitate weaving. These organic materials are typically removed from the greige gabric and replaced with a finish that is compatible with the resin matrix specified in the contracting document Note 18212;Sizing materials on glass fiber yarns, in most cases, are removed by various cleaning procedures as a first stage in preparing a finished fabric. When these yarn sizing materials are removed during a cleaning procedure they need not be compatible with the subsequent resin matrix.1.3 This specification shows values in both SI units and in inch-pound units. "SI units" is the technically correct name for the system of metric units known as the International System of Units." Inch-pound units" is the technically correct name for the customary units used in the United States. The values in SI units are provided as information only; the values stated in inch-pound units are to be regarded as standard.1.4 This specification is one of a series to provide a substitute for Military Specifications: MIL-Y-1140 Yarn, Cord, Sleeving, Cloth, and Tape-Glass; and MIL-C-9084 Cloth, Glass Finished for Resin Laminates.1.5 Additional ASTM specifications in this series have been drafted and appear in current editions of the Annual Book of ASTM Standards. These include greige glass fabrics, glass tapes, glass sleevings, glass cords, glass sewing threads, and finished laminates made from finished glass fabrics.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Finished Woven Glass Fabrics

CGSB 4.2 NO. 8.2-2004-CAN/CGSB-2004 纺织品试验方法.纱线捻度的测定和直接计算方法 ISO 2061:1995

The STANDARDS COUNCIL OF CANADA is the co-ordinating under whose auspices this National Standard of Canada has been body of the National Standards System, a federation of developed is a government agency within Public Works and independent, autonomous o

Textile testing methods Textiles Determination of yarn twist Direct counting method