Q51 石墨材料 标准查询与下载

ASTM C886-98(2005) 碳和石墨材料肖氏硬度试验的标准试验方法

The scleroscope is a rebound hardness tester with a scale divided into 140 equal parts. For carbon and graphite materials, there is no established correlation between the Scleroscope hardness scale and other hardness scales. The test is useful in the evaluation and the manufacturing control of carbon and graphite materials.1.1 This test method covers the apparatus and procedure for determining the hardness of carbon and graphite materials using the Model C-2 scleroscope178; with the hammer calibrated for use on carbon and graphite materials with particles smaller than 0.8 mm (0.032 in.).179;1.2 The values given in acceptable metric units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

ASTM C611-98(2005)e1 室温下人造碳和石墨制品电阻率的试验方法

This test method provides a means of determining the electrical resistivity of carbon or graphite specimens. The use of specimens that do not conform to the specimen size limitations described in the test method may result in an alteration of test method accuracy. 1.1 This test method covers the determination of the electrical resistivity of manufactured carbon and graphite articles at room temperature. 1.2 The values stated in SI units are to be regarded as the standard. 1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

ASTM C886-98(2010)e1 碳和石墨材料肖氏硬度试验的标准试验方法

The scleroscope is a rebound hardness tester with a scale divided into 140 equal parts. For carbon and graphite materials, there is no established correlation between the Scleroscope hardness scale and other hardness scales. The test is useful in the evaluation and the manufacturing control of carbon and graphite materials.1.1 This test method covers the apparatus and procedure for determining the hardness of carbon and graphite materials using the Model C-2 scleroscope with the hammer calibrated for use on carbon and graphite materials with particles smaller than 0.8 mm. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

ASTM C611-98(2016) 室温下炭加工品及石墨制品的电阻率的标准试验方法

3.1 This test method provides a means of determining the electrical resistivity of carbon or graphite specimens. The use of specimens that do not conform to the specimen size limitations described in the test method may result in an alteration of test method accuracy. 1.1 This test method covers the determination of the electrical resistivity of manufactured carbon and graphite articles at room temperature. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

ASTM C611-98(2010)e1 室温下炭加工品及石墨制品的电阻率的标准试验方法

This test method provides a means of determining the electrical resistivity of carbon or graphite specimens. The use of specimens that do not conform to the specimen size limitations described in the test method may result in an alteration of test method accuracy. 1.1 This test method covers the determination of the electrical resistivity of manufactured carbon and graphite articles at room temperature. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

ASTM C748-98(2010)e1 石墨材料洛氏硬度的标准试验方法

A Rockwell L scale hardness number is a number derived from the net increase in depth of impression as the load on a 6.3500 ± 0.0025-mm diameter steel-ball indenter is increased from a fixed 10-kg minor load to a 60-kg major load and then returned to the minor load. A Rockwell hardness number is directly related to the indentation hardness of a material; the higher the Rockwell L scale reading, the harder the material. The test is useful in the evaluation and the manufacturing control of carbon and graphite materials. 1.1 This test method covers Rockwell L scale hardness testing of graphite materials with grain size less than 0.8 mm and a hardness range between 0 and 120. 1.2 Test Methods E18 shall be followed except where otherwise indicated. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Rockwell Hardness of Graphite Materials

ASTM C611-98 室温下炭加工品及石墨制品的电阻率的标准试验方法

1.1 This test method covers the determination of the electrical resistivity of manufactured carbon and graphite articles at room temperature. 1.2 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

ASTM C886-98 碳和石墨材料肖氏硬度试验的标准试验方法

1.1 This test method covers the apparatus and procedures for determining the hardness of fine-grained carbon and graphite materials using the Model C-2 scleroscope with the hammer calibrated for use on fine-grained (particles smaller than 0.8 mm (0.032 in.)) carbon and graphite materials. 1.2 The values given in acceptable metric units are to be regarded as the standard. The values given in parentheses are provided for information purposes only. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

YB/T 122-1997 高炉用石墨砖

Graphite block for blast furnace

JIS R 7222:1997 石墨材料的物理性能试验方法

この規格は，黒鉛素材(以下，素材という。)の物理特性測定方法について規定する。

Test methods for physical properties of graphite materials

JIS R 7202:1997 圆柱形机加工石墨电极的螺纹精确度试验方法

この規格は，人造黒鉛丸形電極(以下，電極という。)のねじ精度測定方法について規定する。

Testing methods for screw precision of cylindrical machined graphite electrodes

JIS R 7201:1997 圆柱形机械石墨电极

Cylindrical machined graphite electrodes

JIS R 7223:1997 石墨材料的化学分析

この規格は，黒鉛素材(以下，素材という。)の化学分析方法について規定する。

Chemical analysis of graphite materials

YB/T 5053-1997 石墨阳极

Graphite anode

YB/T 099-1997 石墨电极.焙烧品

Baked compact for graphite electrode

AIR FORCE MIL-Y-87125 A NOTICE 3-1997 1000/3000细丝的石墨线

This notice should be filed in front of MIL-Y-87125A(USAF), dated 27 July 1979.

YARN, GRAPHITE, 1000/3000 FILAMENTS

ARMY MIL-G-47316 A NOTICE 1-1996 用于高温的模制石墨

This commercial item description covers brown kraft paper used for general wrapping applications.

GRAPHITE, MOLDED, FOR HIGH TEMPERATURE APPLICATIONS

ASTM C838-96(2001) 人造砷-碳与石墨塑型容积密度测试方法

1.1 This test method covers the determination of the density of as-manufactured carbon and graphite from measurements of mass and dimensions at room temperature. 1.2 This test method is applicable to boronated carbon and graphite. 1.3 This test method is not applicable to carbon- and graphite-containing materials that are thermally unstable at or below temperatures of 200176;C. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

ASTM C838-96(2010)e1 人造砷-碳与石墨塑型容积密度的标准试验方法

This test method provides a means of determining bulk density on as-manufactured logs, blocks, or shaped articles. This test method is suitable for manufacturing control and acceptance specifications. Test Method C559 may be used when a higher degree of accuracy is required. 1.1 This test method covers the determination of the density of as-manufactured carbon and graphite from measurements of mass and dimensions at room temperature. 1.2 This test method is applicable to boronated carbon and graphite. 1.3 This test method is not applicable to carbon- and graphite-containing materials that are thermally unstable at or below temperatures of 200°C. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

ASTM C838-96 人造砷-碳与石墨塑型容积密度测试方法

1.1 This test method covers the determination of the density of as-manufactured carbon and graphite from measurements of mass and dimensions at room temperature. 1.2 This test method is applicable to boronated carbon and graphite. 1.3 This test method is not applicable to carbon- and graphite-containing materials that are thermally unstable at or below temperatures of 200176;C. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes