Q62 石膏制品 标准查询与下载

DIN EN 14246:2006 吊顶石膏成分.定义、要求和试验法

Gypsum elements for suspended ceilings - Definitions, requirements and test methods English version of DIN EN 14246:2006-09

JIS A 6901 ERRATUM 1:2006 勘误

ERRATUM

BS EN 14246:2006 吊顶用石膏构件.定义、要求和试验方法

This European Standard specifies the characteristics and performance of factory made cast gypsum elements, for which the main intended uses are the construction of suspended ceilings under universal substrates. It covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength (expressed as breaking load) and thermal resistance (expressed as thermal conductivity). The following performance characteristics are linked to systems assembled with gypsum elements for suspended ceilings: fire resistance, direct airborne sound insulation and acoustic absorption, which can be measured according to the corresponding European test methods. If required, tests should be done on assembled system simulating the end use conditions. This European Standard describes the reference tests for technical specifications. This European Standard also covers additional technical characteristics that are of importance for the use and the acceptance of the product by the construction industry and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this European Standard. This European Standard does not cover metal ceiling grids or plasterboard products. This European Standard excludes stiffening timber roof truss structure applications.

Gypsum elements for suspended ceilings — Definitions, requirements and test methods

NF P72-602:2006 隔热/隔音面板和灰泥板用石膏基胶粘剂.定义、要求和试验方法

Gypsum based adhesives for thermal/acoustic insulation comosite panels and plasterboards - Definitions, requirements and test methods.

NF P72-642:2006 成型的石膏板檐口.定义、要求和试验方法

Preformed plasterboard cornices - Definitions, requirements and test methods.

DIN EN 13950:2006 隔热/隔音合成石膏灰泥墙板.定义、要求和试验办法.德文版本 EN 13950-2005

This European Standard specifies the characteristics and performance of thermal/acoustic insulation composite panels made of an insulating material laminated to gypsum plasSerboards for which the main intended use is the internal insulation (thermal and/or acoustic) of walls. They are attached with adhesives or by mechanical fixings to vertical solid backgrounds and by mechanical fixings to wood or metal framing with the plasterr)oard face exposed. The method of fixing and jointing shall ensure that the insulating material is not exposed in its normal application This European Standard covers the following performances characteristics: reaction to fire. fire resistance, water vapour permeability, flexural strength, impact resistance, direct airborne sound insulation and thermal resistance to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the products to this European Standard. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry.

Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods; English version of DIN EN 13950:2006-02

ASTM C1629/C1629M-06(2011) 抗机械损伤的未装饰的内部石膏板产品和纤维加强水泥板标准分类

Each abuse/impact property of abuse resistant wall panels is divided into three classification levels. The three levels of classification are: Level I, Level II, and Level III, with Level I representing the lowest rating for any given property. The test methods specified are utilized to establish the abuse-resistance classification of an abuse resistant wall panel. Each classification level requires a minimum overall specified performance. Any classified abuse resistant wall panel can be used at a classification level which is rated lower than the highest level qualified.1.1 This standard establishes classifications of abuse resistance based on minimum abuse-resistance performance of nondecorated interior gypsum panel products and fiber-reinforced cement panels (abuse resistant wall panels). 1.2 The values stated in inch-pound and SI (metric) units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

ASTM C1658/C1658M-06 玻璃纤维石膏板的标准规范

1.1 This specification covers the glass mat gypsum panels described in 1.1.1-1.1.3.1.1.1 Glass mat interior gypsum paneldesigned for use on walls, ceilings, or partitions and that affords a surface suitable to receive decoration.1.1.2 Glass mat coreboard gypsum panel, and glass mat shaftliner gypsum paneldesigned for use as a base in multilayer systems or as gypsum studs or cores in semisolid or solid gypsum board partitions, or in shaftwall assemblies.1.1.3 Glass mat water-resistant gypsum paneldesigned to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration. (This is distinct from a coated glass mat water-resistant gypsum panel ASTM C 1178.) 1.2 Specifications applicable to all glass mat gypsum panels are located in Sections and . Specifications applicable to specific glass mat gypsum panels are located in the following sections:SectionGlass mat interior gypsum panel5Glass mat coreboard gypsum panel, and glass mat shaftlinergypsum panel6Glass mat water-resistant gypsum panel71.3 The values stated in either inch-pound units or SI (metric) are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined.

Standard Specification for Glass Mat Gypsum Panels

ASTM C473-06a 石膏板制品的物理测试的标准试验方法

1.1 These test methods cover the physical testing of gypsum panel products.1.2 The test methods appear in the following order:SectionFlexural Strength (Method A)Core, End and Edge Hardness (Method A)Nail Pull Resistance (Method A)Flexural Strength (Method B)Core, End and Edge Hardness (Method B)Nail Pull Resistance (Method B)Humidified DeflectionEnd SquarenessNominal ThicknessRecessed- or Tapered Edge DepthWidthLengthWater Resistance of Core-Treated Water-Repellent Gypsum Panel Products Surface Water Resistance of Gypsum Panel Products with Water-Repellent Surfaces 1.3 The text of these test methods references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of these test methods.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Physical Testing of Gypsum Panel Products

ASTM C473-06 石膏板制品的物理测试的标准试验方法

1.1 These test methods cover the physical testing of gypsum panel products.1.2 The test methods appear in the following order:1.3 The text of these test methods references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of these test methods.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Methods for Physical Testing of Gypsum Panel Products

ASTM C840-06 石膏板的应用和加工的标准规范

1.1 This specification covers the minimum requirements for the methods of application and finishing of gypsum board, including related items and accessories. 1.2 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.1.2.1 Where this specification is more stringent (size or thickness of framing: size and spacing of fasteners) than the fire-rated construction, this specification shall govern. 1.3 Where sound control is required for a gypsum board assembly, details of construction shall be in accordance with reports of acoustical tests of assemblies that have met the required acoustical values. 1.4 Unheated spaces above gypsum board ceilings shall be properly ventilated (see). 1.5 The various application systems are located in the following sections:The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are approximate and are provided for information purposes only. 1.6 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.7 The following precautionary caveat pertains only to Sections . This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.7.1 For specific precautionary statements, see 4.1.1, 4.1.2, and 22.5.

Standard Specification for Application and Finishing of Gypsum Board

ASTM C955-06 螺钉安装石膏板及金属熟石膏基板用承重(横向及轴向)钢骨、导板、系杆或隔栅撑标准规范

1.1 This specification covers steel studs, runners (tracks), and bracing or bridging (with a base metal thickness range of not less than 0.0329 in. (0.836 mm)) for screw application of gypsum panel products and metal plaster bases in load-bearing (transverse and axial) construction assemblies. Steel of lesser thickness shall be permitted in additional engineered products. 1.2 The values stated in inch-pound units are to be regarded as the standard. The SI (metric) values given in parentheses are provided for information purposes only. The following precautionary caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases

ASTM C11-06 与石膏和有关建筑材料和系统相关的标准术语

1.1 This standard covers terminology relating to gypsum and related building materials and systems. The terms are generically defined. More specific and expanded definitions may appear in appropriate standards.

Standard Terminology Relating to Gypsum and Related Building Materials and Systems

ASTM C1629/C1629M-06 防滥用无装饰室内石膏板产品和纤维增强水泥板的标准分类

Each abuse/impact property of abuse resistant wall panels is divided into three classification levels. The three levels of classification are: Level I, Level II, and Level III, with Level I representing the lowest rating for any given property. The test methods specified are utilized to establish the abuse-resistance classification of an abuse resistant wall panel. Each classification level requires a minimum overall specified performance. Any classified abuse resistant wall panel can be used at a classification level which is rated lower than the highest level qualified.1.1 This standard establishes classifications of abuse resistance based on minimum abuse-resistance performance of nondecorated interior gypsum panel products and fiber-reinforced cement panels (abuse resistant wall panels).1.2 The values stated in inch-pound and SI (metric) units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independent of the other. Values from the two systems shall not be combined.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

BS EN 14209:2005 预制石膏板檐口.定义、要求和试验方法

This European standard specifies the characteristics and performance of preformed plasterboard cornices intended to be used in building construction works either as part of the original specification or subsequently for improved decorative enrichment of the wall/ceiling angle in rooms. This standard covers the performance characteristics: reaction to fire and flexural strength. This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this European standard. This standard does not cover plain plaster and gypsum fibrous plasterwork cornices.

Preformed plasterboard cornices - Definitions, requirements and testmetho ds

KS F 4915-2005 石膏板用接合处理材料

이 규격은 건축물 내부의 벽 및 천장 부분에 사용하는 석고 보드의 주로 조인트 부분을 보강

Joint treatment materials for gypsum boards

NF P72-621:2005 再生石膏板产品.定义、要求和试验方法

Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods.

BS EN 13950:2005 隔热/隔音合成石膏墙板.定义、要求和试验办法.

This European Standard specifies the characteristics and performance of thermal/acoustic insulation composite panels made of an insulating material laminated to gypsum plasterboards for which the main intended use is the internal insulation (thermal and/or acoustic) of walls. They are attached with adhesives or by mechanical fixings to vertical solid backgrounds and by mechanical fixings to wood or metal framing with the plasterboard face exposed. The method of fixing and jointing shall ensure that the insulating material is not exposed in its normal application This European Standard covers the following performances characteristics: reaction to fire, fire resistance, water vapour permeability, flexural strength, impact resistance, direct airborne sound insulation and thermal resistance to be measured according to the corresponding European test methods. It provides for the evaluation of conformity of the products to this European Standard. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry.

Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods

JIS A 6901:2005 石膏板

この規格は，主に建物の壁，天井に用いる下地材及び仕上げ材のせっこうボード製品（以下,GBという。)について規定する。 この規格では，GBの試験方法及びその特性を規定し，また，種類及び各用途を規定する。

Gypsum boards

DIN EN 14190:2005 再加工生成的石膏板产品.定义、要求和试验方法

This European Standard specifies the characteristics and performance of products which have been produced from gypsum plasterboards manufactured according to EN 520 by reprocessing. Reprocessing may include cutting, perforating, edge profiling, decorating and laminating membranes of other materials for functional or decorative purposes, attaching fixings including supports e.g. for partitions. A fuller list of reprocessing operations is given in Annex B. Gypsum plasterboards subject to reprocessing operations may be suitable for extended applications such as suspended ceilings providing sound absorption, flooring, self decorative finishes, Iow emissivity characteristics, moisture vapour control and X-ray protection. The products are intended for use in wall, ceiling and floor applications, where they may be fixed direct to the background, or they are used in systems assembled in conjunction with the structure to form separate or suspended linings. The products offer a wide range of aesthetic solutions of modular or non-modular design. This standard covers the following product performance characteristics: reaction to fire, water vapour permeability, stability in case of ceiling elements, fiexural strength (breaking load), impact resistance, thermal resistance. The following performance characteristics are linked to systems assembled with products from reprocessing: shear strength, direct airborne sound insulation and acoustic absorption to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions. This European standard also covers additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this standard. This standard does not cover gypsum plasterboard thermal/acoustic insulation composite panels and prefabricated gypsum wallboard panels according to prEN 13950 and prEN 13915, respectively.

Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods; English version of DIN EN 14190:2005