Q71 木构配件 标准查询与下载

SANS 10243:2004 木桁架的制造和假设

Gives guidance on the manufacture, erection and bracing of timber roof trusses, including nail-plated trusses and bolted trusses with lapped members.

The manufacture and erection of timber trusses

SANS 6126:2004 木门抗软物撞击性能

Specifies a method for the determination of the resistance of wooden doors to soft body impact.

Resistance of wooden doors to soft body impact

SANS 6123:2004 木门．挺度的测定

Specifies a method of determining the stiffness of a wooden door.

Wooden doors - Determination of stiffness

SANS 6129:2004 木门．2类．耐候化性能的测定

Specifies a method of determining the resistance of a class 2 wooden door to adverse weather conditions.

Wooden doors - Class 2 - Determination of resistance to weathering

SANS 6125:2004 木门抗硬物撞击性能

Specifies a method for the determination of the resistance of wooden doors to hard body impact.

Resistance of wooden doors to hard body impact

SANS 6128:2004 木门抗摔性能

Specifies a method for the determination of the resistance of wooden doors to slamming.

Resistance of wooden doors to slamming

DIN EN 14251:2004 结构圆木.试验方法

This test standard specifies test methods for determining the following properties of structural round timber: bending strength, modulus of elasticity in bending, the compressive strength parallel to the grain and modulus of elasticity in compression parallel to the grain.

Structural round timber - Test methods; German version EN 14251:2003

ASTM D7032-04 确立木材-塑料复合物上承板和护栏设备的性能额定值的标准规范

1.1 This specification covers the procedures to establish a performance rating for wood-plastic composite (WPC) deck boards. This specification also defines the procedures to establish a performance rating for WPC guards and handrails. The purpose of this specification is to establish the basis for code recognition of these products or systems in exterior applications where combustible construction is allowed (see X1.1).1.2 Deck boards, guards, and handrails covered by this specification are permitted to be of any code compliant shape and thickness (solid or non-solid).Note 18212;While WPCs are produced in a broad range of ratios of fiber to resin it is recognized that the performance requirements in this specification are valid for any material or combination of materials used as deck boards, guards, or handrails. For products made primarily from resin, or for products that exhibit highly plastic properties (for example, more than 3 % strain without rupture in a standard flexural test under ambient conditions), users are directed to Specification D 6662 for additional guidance.1.3 A deck board, and a deck board used as a stair tread, are assigned a span rating indicating its ability to comply with model code specified functions identified for its specific end use. A guard or handrail is recognized for its ability to meet minimum code requirements specified in the appropriate model building code.1.4 Details of manufacturing processes may be proprietary and are beyond the scope of this specification.1.5 UnitsThe values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

BS ISO 12472:2003 木制门组件的耐火性.膨胀型密封剂工效的测定方法

For each type of element of construction, the application of test results will be considered under two sub-headings.

Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals

BS 644:2003 木窗.工厂组装的各种类型窗.规范

This British Standard specifies requirements for materials (including timber preservation), profile design, workmanship, glazing, construction, safety, security, weathertightness performance, and operation and strength performance of factory assembled timber windows of the following types: a) hinged: side hung, top hung and bottom hung; b) projecting side hung (open out or reversible); c) projecting top hung (open out or reversible); d) pivoted: horizontal and vertical (hung centrally or off-centre, including reversible); e) sliding: horizontal and vertical; f) tilt and turn; g) fixed light; h) direct glazed. This British Standard does not apply to windows supplied as kits for site assembly. NOTE The timber windows covered by this British Standard may be treated with either opaque or non-opaque finishes. Some glazing and finishing operations may be carried out on site.

Timber windows - Factory assembled windows of various types - Specification

ASTM C841-03 室内板条及垫高料安装的标准规范

1.1 This specification covers the minimum requirements for, and the methods of application of, interior lathing and furring to receive gypsum plaster applied in accordance with Specification C 842. Other materials are not prohibited from being used provided that their physical characteristics and durability under conditions of usage are at least equal in performance to those described.1.2 The values stated in inch-pound units are to be regarded as the standard. The metric values shown in parentheses are provided for information only.1.3 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories.1.4 Where a specific degree of sound control is required for plastered assemblies and constructions, details of construction shall be obtained from reports of sound tests of assemblies that have met the requirements of Test Method E 492.

Standard Specification for Installation of Interior Lathing and Furring

ASTM C841-03(2008)e1 室内板条及垫高料安装的标准规范

1.1 This specification covers the minimum requirements for, and the methods of application of, interior lathing and furring to receive gypsum plaster applied in accordance with Specification C 842. Other materials are not prohibited from being used provided that their physical characteristics and durability under conditions of usage are at least equal in performance to those described. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 Details of construction for a specific assembly to achieve the required fire resistance shall be obtained from reports of fire-resistance tests, engineering evaluations, or listings from recognized fire testing laboratories. 1.4 Where a specific degree of sound control is required for plastered assemblies and constructions, details of construction shall be obtained from reports of sound tests of assemblies that have met the requirements of Test Method E 492.

Standard Specification for Installation of Interior Lathing and Furring

GOST 11214-2003 带玻璃的木窗的规范

Windows of wood with glass. Specifications

BS EN 13377:2002 预制木构架梁.要求、分类和评定

This European Standard specifies classification, requirements and assessment procedures for prefabricated timber formwork beams. It also gives information on production control requirements. Prefabricated timber formwork beams are intended for use in falsework and formwork and to be loaded in the direction of the beam depth. They are of glued -shaped construction consisting of two identical flange members of solid timber connected by a single web of wood based material with beam depths of 160 mm, 200 mm and 240 mm, or connected by or a lattice of solid timber members with a beam depth of 240 mm beam depth.

Prefabricated timber formwork beams - Requirements, classification and assessment

DIN EN 13377:2002 预制的木材模板梁.分类和评估要求; 德文版本 EN 13377:2002

This European Standard specifies classification, requirements and assessment procedures for prefabricated timber formwork beams for temporary use in construction works. This European Standard covers beams which are made of solid timber or a combination of solid timber and timber based material and which are assembled by glueing.#,,#

Prefabricated timber formwork beams - Requirements, classification and assessment; German version EN 13377:2002

KS B 7363-2002 猪圈地板材料

이 규격은 양돈 시설에 사용되는 양돈용 바닥재(이하 바닥재라 한다.)에 대하여 규정한다.

Floor material for swine housing

EN 13810-1:2002 木基板浮隔地板.第1部分:性能规范和要求(V)

This European Standard provides the performance specifications and requirements for wood-based panels used in continuously fully supported non-structural floating floors.

Wood-based panels Floating floors Part 1: Performance specifications and requirements (V)

ISO 9366:2001 集成（凝聚）软木弹性地砖片 尺寸和边缘的平直度和垂直度的测定

This International Standard specifies a method for the determination of the dimensions of agglomerated cork floor tiles or slabs, and the deviation from squareness and from straightness of their edges. NOTE 1 Alternatively, methods described in EN 427 and EN 428 may be used. NOTE 2 The term "tiles" used in this International Standard covers either tiles or slabs.

Agglomerated cork floor tiles - Determination of dimensions and deviation from squareness and from straightness of edges

DIN 68702:2001 木制铺面

The document applies to wood paving as flooring with a representative character e.g. in assembly halls and in domestic areas as well as for flooring in workrooms in educational facilities and for wood pavings for commercial and industrial purposes with vehicular and stacker traffic.

Wood paving

BS EN 12104:2000 弹性地板覆盖物.软木地板砖.规格

This European Standard specifies the requirements for cork floor coverings made from agglomerated composition cork supplied in tile form which are designed to be used with a factory finish and/or an insitu finish. Cork floor coverings can be covered with other complementary layers of decorative materials, e.g. decorative cork or wood veneers, with or without applied colours. This European Standard includes a classification system based on intensity of use which shows where cork floor tiles should give satisfactory service (see EN 685). It also specifies requirements for marking, labelling and packing.

Resilient floor coverings. Cork floor tiles. Specification