Q81 供水、排水器材设备 标准查询与下载

DIN EN 12201-1:2011 给排水以及压力排污用塑料管道系统.聚乙烯(PE).第1部分:总则;德文版本EN 12201-1-2011

This part of EN 12201 specifies the general aspects of poyethylene (PE) - pressure piping systems (mains and service pipes)for buried or above ground applications. intended for the conveyance of water for human consumption,raw water prior to treatment, dr

NF P16-360*NF EN ISO 13260:2011 无压排水和污水系统用热塑管路系统.温度周期变化和外部负载阻力测试方法.

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading.

DIN EN ISO 13260:2011 无压地下排水排污系统用热塑性塑料管道系统.温度周期性变化和外部荷载综合抗性的测试方法(ISO 13260-2010);德文版本EN ISO 13260-2011

This Intenational Standard specifies two methods for testing pipes and fittings or joints for plastics piping systems intended for use in underground drainage and sewerage systems for their resistance to deformation and leakagem when subjected to sustained external loading in conjunction with the passage of hot water.

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Test method for resistance to combined temperature cycling and external loading (ISO 13260:2010); German version EN ISO 13260:2011

DIN EN 12666-1:2011 无压力地下排水系统和排水设备所用塑料管道系统.聚乙烯(PE).第1部分:管道,设备和系统的规范;德文版本EN 12666-1-2005+A1-2011

This Part fo EN 12666 specifies the requirements for pipws, fittings and the system of polyethylene(PE) piping systems intended to be used for --non-pressure underground drainage and sewerage outside the building structure

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system; German version EN 12666-1:2005+A1:2011

ISO 19892:2011 塑料管路系统.热冷水热塑管道和配件压力循环接头阻力试验方法

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of joints to pressure cycling

ISO/TS 22391-7:2011 热冷水设施用塑料管路系统.耐温性提高的聚乙烯(PE-RT).第7部分:一致性评价指南

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity

DIN EN 33:2011 抽水马桶和厕所配套设施.连接尺寸;德文版本EN 33-2011

This European Standard specifies the connecting dimensions of WC pans WC suites regardless of the materials used for their manufacture.

WC pans and WC suites - Connecting dimensions; German version EN 33:2011

ISO 11296-7:2011 地下无压排水和污水网络改造用塑料管路系统.第7部分:螺旋衬管

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes

DIN EN 12201-5:2011 给排水以及压力排污用塑料管道系统.聚乙烯(PE).第5部分:系统的适用性;德文版本EN 12201-5-2011

This Part fo EN 12201 specifies the characteristics of the fitness for purpose of the assembled piping systems intended for the conveyance of water inended for human consumption, raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes.

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system; German version EN 12201-5:2011

ISO 13056:2011 塑料管路系统.热冷水压力系统真空密封性试验方法

Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum

BS ISO 23228:2011 输送液体用热塑性塑料管道.简单应力开槽拉伸(PSGT)样本使用的模具太累的应力断裂阻力的测定

Thermoplastics pipes for the conveyance of fluids. Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens

BS 8542:2011 非住宅建筑内家庭用水量计算.操作规程

This British Standard gives recommendations for calculating the volume of public mains water that is consumed for domestic use in non-domestic buildings. It gives recommendations for estimating the total water use from the buildings’ components, allowing consumption to be indicated on a whole building level against other buildings for best practice levels. This standard is not for use as a design guide. It provides a framework for and details the development of water use calculation methodologies in non-domestic buildings. It provides recommendations for the quality of data used to calculate water use for each component in non-domestic buildings and also standardized reporting for product performance data. It applies to both new and existing buildings and covers: Water that is sourced from unwholesome sources such as rainwater harvesting systems or greywater reuse systems;and Water that is sourced from wholesome sources including both hot and cold water.

Calculating domestic water consumption in non-domestic buildings. Code of practice

UL 2780-2011 便池除臭垫

Urinal blocks

NF D14-517:2011 抽水马桶和厕所设备.连接尺寸.

WC pans and WC suites - Connecting dimensions.

NF D14-516:2011 洗面盆连接尺寸.

Wash basins - Connecting dimensions.

ISO 6224:2011 通用供水纺织增强热塑管规范

This International Standard specifies the requirements for general-purpose textile-reinforced thermoplastics water-discharge hoses. — ambient temperatures: −10 °C to +60 °C; — water temperature during operation: 0 °C to +60 °C. NOTE Three types of hose are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: At water temperatures above 23 °C and particularly above 40 °C, the maximum working pressure will be reduced. These hoses are not intended to be used for conveyance of potable (drinking) water, for washing-machine inlets, as fire-fighting hoses, for special agricultural machines or as gardening hoses for the consumer market.

Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification

ISO 13272:2011 地下排水和污水用塑料管路系统.未增塑聚氯乙烯(PVC-U)，聚丙烯(PP),带有矿物改性剂的聚丙烯(PP-MD)和聚乙烯(PE).交通区检查孔和检查井规范

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection ch

BS EN 13618:2011 饮用水设施中的挠性软管组件.功能要求和试验方法

Flexible hose assemblies in drinking water installations. Functional requirements and test methods

BS EN 33:2011 抽水马桶和厕所套间.连接尺寸规格

WC pans and WC suites. Connecting dimensions

BS EN 31:2011 洗脸盆.连接尺寸规格

Wash basins. Connecting dimensions