Q81 供水、排水器材设备 标准查询与下载

DIN EN 545:2011 水管用球墨铸铁管,配件,附件及其接头 -要求和试验方法;德文版本EN 545-2010

Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2010

DIN 1988-100:2011 饮用水设施的实施规程.第100部分:饮用水保护,饮用水质量监控;DVGW惯例

Codes of practice for drinking water installations - Part 100: Protection of drinking water, drinking water quality control; DVGW code of practice

DIN EN ISO 4641:2011 给排水用橡胶软管和软管组件.规格(ISO 4641-2010).德文版本EN ISO 4641-2011

This International Standard specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: - ambient temperatures: -25 °C to +70 °C; - water temperatures during operation: 0 °C to +70 °C.

Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2010); German version EN ISO 4641:2011

NF T54-967-3:2011 地下供水网翻新用塑料管道系统.第3部分:无缝管道衬里.

Plastics piping systems for renovation of underground water supply networks - Part 3 : lining with close-fit pipes.

NF T54-967-1:2011 地下供水网翻新用塑料管道系统.第1部分:总则.

Plastics piping systems for renovation of underground water supply networks - Part 1 : general.

NF D12-207:2011 卫生洁具-马桶座圈

Appareils sanitaires - Abattants de WC

NF P16-364-4:2011 地下无压排水管网和污水管网翻新用塑料管道系统.第4部分:现场加工管衬里.

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4 : lining with cured-in-place pipes.

NF P16-364-1:2011 地下无压排水和污水管网翻新用塑料管道系统.第1部分:总则.

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1 : general.

ISO 7186:2011 排水装置用球墨铸铁产品

Ductile iron products for sewerage applications

DIN EN ISO 11296-1:2011 地下无压排水道及污水网的翻修用塑料管道系统.第1部分:综述(ISO 11296-1-2009).德文版本EN ISO 11296-1-2011

This part of ISO 11296 specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground non pressure drainage and sewerage networks, which are operated as gravity systems and subjected to a maximum surcharge pressure of 0,5 bar ). It is applicable to pipes and fittings as manufactured, as well as to the installed plastics lining system; it is not applicable to the existing pipeline or any annular filler. This part of ISO 11296 establishes the general requirements common to all relevant renovation techniques.

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2009); German version EN ISO 11296-1:2011

DIN EN ISO 11298-1:2011 地下供水网络的修缮用塑料管道系统.第1部分:总则(ISO 11298-1-2010).德文版本EN ISO 11298-1-2011

This part of ISO 11298 specifies the requirements and test methods for plastics piping systems intended to be used for the renovation of underground water supply networks, which transport water intended for human consumption, including raw water intake pipelines. It is applicable to pipes and fittings, as manufactured, as well as to the installed lining system. It is not applicable to cover sprayed coatings, the existing pipeline or any annular filler. This part of ISO 11298 gives the general requirements common to all relevant renovation techniques.

Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2010); German version EN ISO 11298-1:2011

DIN EN ISO 21003-2:2011 建筑物内部用冷热水装置的多层管道系统.第2部分:管道(ISO 21003-2-2008 + Amd 1-2011).德文版本EN ISO 21003-2-2008 + A1-2011

This part of ISO 21003 specifies the characteristics of pipes for multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water - whether or not the water is intended for human consumption (domestic systems) or heating systems, - under specified design pressures and temperatures appropriate to the class of application (see Table 1 of ISO 21003-1:2008). It also specifies the test parameters for the test methods referred to in this part of ISO 21003. ISO 21003 is a reference product standard. It is applicable to multilayer pipes, fittings, their joints, and also to joints with components made of other plastics and non-plastics materials intended to be used for hot and cold water installations. This part of ISO 21003 is intended for use only in conjunction with all the other parts of ISO 21003. ISO 21003 covers a range of service conditions (application classes) and design pressures. The polymeric materials used for the stress-designed layers are the following: polybutylene (PB), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) and chlorinated poly(vinyl chloride) (PVC-C).

Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011); German version EN ISO 21003-2:2008 + A1:2011

DIN EN ISO 11298-3:2011 地下供水网络的修缮用塑料管道系统.第3部分:紧配合管道衬里(ISO 11298-3-2010).德文版本EN ISO 11298-3-2011

This part of ISO 11298, in conjunction with ISO 11298-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of water supply networks, which transport water intended for human consumption, including raw water intake pipelines. It is applicable to polyethylene (PE) pipe for both independent and interactive pressure pipe liners as well as associated fittings and joints for the construction of the lining system.

Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010); German version EN ISO 11298-3:2011

DIN EN ISO 11296-3:2011 地下无压排水道及污水网的翻修用塑料管道系统.第3部分:无缝管道的衬里(ISO 11296-3-2009+Cor.1-2011).德文版本EN ISO 11296-3-2011

This part of ISO 11296, in conjunction with ISO 11296-1, specifies requirements and test methods for close-fit lining systems intended to be used for the renovation of non-pressure drainage and sewerage networks. It applies to pipes and fittings made of polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U). It is applicable to the plastic lining system only. It is not applicable to the requirements for the existing pipeline.

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2009+Cor.1:2011); German version EN ISO 11296-3:2011

DIN EN ISO 11296-4:2011 地下无压排水道及污水网的翻修用塑料管道系统.第4部分:固化在管道中的衬里(ISO 11296-4-2009,修正版本2010-06-01).德文版本EN ISO 11296-4-2011

This part of ISO 11296, in conjunction with ISO 11296-1, specifies requirements and test methods for cured-in-place pipes and fittings used for the renovation of underground non-pressure drainage and sewerage networks. It applies to the use of various thermosetting resin systems, in combination with compatible fibrous carrier materials and other process-related plastics components (see 5.1).

Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2009, corrected version 2010-06-01); German version EN ISO 11296-4:2011

BS ISO 21307:2011 塑料管材和管件.配气和配水系统的建造用聚乙烯(PE)管道和配件用对焊熔接程序

Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

DIN 2459:2011 饮用水系统装置中使用的金属管用不可分割的金属制弹性密封连接器.一般要求和试验方法

Inseparable elastomer sealed connectors made of metal for metallic pipes for use in drinking water system installation - General requirements and test methods

DIN EN 14154-2:2011 水表.第2部分:安装和使用条件;德文版本EN 14154-2-2005+A2-2011

This document specifies criteria for selection of water meters, installation requirements and the first operation of new or repaired meters to ensure accurate constant measurement and reliable reading of the meter. In applications where a water meter is legally required to conform to the requirements of the Measuring Instruments Directive, this document may be used to demonstrate conformity. Where legal national requirements exist they shall in all cases take precedence over or supplement the specifications given in this part of this document.

Water meters - Part 2: Installation and conditions of use; German version EN 14154-2:2005+A2:2011

DIN 4263:2011 给排水工程用液压设计的污水管和排水管几何值

Geometrical values of drains and sewers for hydraulic design for water and waste water engineering

DIN EN 14154-1:2011 水表.第1部分:一般要求;德文版本EN 14154-1-2005+A2-2011

This document applies to water meters intended for residential, commercial, light industrial and industrial use, and specifies the requirements and certification procedures for water meters, irrespective of the design technologies used to meter the actual volume of clean cold potable water or heated water, flowing through a fully charged, closed conduit. These water meters shall incorporate devices, which indicate the integrated volume. This document also applies to water meters based on electrical or electronic principles, and to water meters based on mechanical principles incorporating electronic devices, used to meter the actual volume flow of cold potable water or heated water. It provides metrological requirements for electronic ancillary devices when they are subject to metrological control. As a rule the ancillary devices are optional. However national or international regulations make some ancillary devices mandatory in relation to the utilisation of the water meter.

Water meters - Part 1: General requirements; German version EN 14154-1:2005+A2:2011