Q82 供气器材设备 标准查询与下载

ANSI/CSA LC4-2012 用于燃气配送系统的压接铜和铜合金配件(同CSA 6.32)

Standard for Press-Connect Metallic Fittings for Use in Fuel Gas Distribution Systems (same as CSA 6.32)

ANSI/ASTM F2509:2012 外径受控的聚乙烯煤气分配管及配管用现场组装的无阳极立管成套部件标准规格

Specification for Field-Assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

ANSI Z83.8b-2012 气体加热器、气体组合加热器、气体效用加热器及燃气管道炉(同CSA 2.6b)

Gas Unit Heaters, Gas Packaged Heaters, Gas Utility Heaters, and Gas-Fired Duct Furnaces (same as CSA 2.6b)

ANSI/ASME B31.8-2012 气体输送和分配管道系统

Gas Transmission and Distribution Piping Systems

ANSI/ASME B31.8S-2012 燃气管道的管理系统完整性

Managing System Integrity of Gas Pipelines

ASME STP-PT-049-2012 高强线管温度降额因子的调查

This report reviews the ASME derating factors, identifies the range of line pipe steel grades that may be affected and the potential impacts to ASME pipeline and piping design standards, and makes recommendations for further study or experimental investigation as necessary.

INVESTIGATION OF TEMPERATURE DERATING FACTORS FOR HIGH-STRENGTH LINE PIPE

ANSI Z21.21-2012 燃气器具用自动阀(与CSA 6.5b标准相同)

This standard applies to individual automatic valves or valves utilized as parts of automatic gas ignition systems. This standard also applies to commercial\industrial safety shutoff valves, herein after referred to as C/I valves. This standard shall not apply to self-contained water heater, cooking appliance, or room heater thermostats, or self-contained automatic gas shutoff valves for hot water supply systems.

Automatic Valves for Gas Appliances (same as CSA 6.5)

ANSI Z21.18b-2012 燃气器具压力调节器(同CSA 6.3b标准)

This standard applies to individual gas appliance pressure regulators, which are not a part of a combination control, intended for application on individual gas appliances. This standard also applies to negative gas appliance pressure regulators.

Standard for Gas Appliance Pressure Regulators (same as CSA 6.3b)

ASME B31.8S-2012 燃气管道的管理系统完整性

Managing System Integrity of Gas Pipelines

ANSI/ASTM F1924:2012 外径可控的聚乙烯供气管道用塑料机械配件规格

Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

ANSI Z21.69a-2012 可移动燃气器具连接器的标准 (同CSA 6.16a标准)

Details test and examination criteria for gas appliance connectors consisting of flexible tubing for connecting gas supply piping to a gas appliance mounted on casters or otherwise subject to movement. These connectors are limited to a maximum length of 6 feet (1.83 m). These connectors are suitable for use with natural, manufactured or mixed gases, liquefied petroleum gases, or LP gas-air mixtures, at pressures not in excess of 1/2 psi (3.5 kPa).

Standard for Connectors for Movable Gas Appliances (same as CSA 6.16a)

ANSI Z21.57a-2012 娱乐车辆燃气灶具标准

Standard for Recreational Vehicle Cooking Gas Appliances

ASTM D2513-12 聚乙烯煤气压力管,配管及管件标准规格

1.1 This specification covers requirements and test methods for material dimensions and tolerances, hydrostatic burst strength, chemical resistance, and rapid crack resistance of polyethylene pipe, tubing, and fittings for use in fuel gas mains and services for direct burial and reliner applications. The pipe and fittings covered by this specification are intended for use in the distribution of natural gas. Requirements for the qualifying of polyethylene systems for use with liquefied petroleum gas are also covered. 1.1.1 This specification does not cover threaded pipe. Design considerations are discussed in Appendix X1. In-plant quality control programs are specified in Annex A1 and Annex A2. 1.1.2 See Specification F2619/F2619M for polyethylene piping for pressure or non-pressure oil and gas producing applications to convey fluids such as oil, dry or wet gas, multiphase fluids, and non-potable oilfield water. 1.2 The text of this specification references notes, footnotes, and appendixes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following is an index of the annexes and appendix in this specification: Annex Subject Annex A1 In-Plant Quality Control for all materials up to 12 in. Annex A2In-Plant Quality Control for PE materials 14 in. and larger. AppendixesSubject Appendix X1 Design Consideration 1.5 The following precautionary caveat pertains only to the test method portion, Section 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

ANSI/ASTM F2785:2012 高分子12气压管,管道和配件规格

Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

ANSI Z21.97-2012 室外装饰燃气器具用标准(与CSA 2.41标准相同)

Applies to newly produced, decorative gas appliances for outdoor installation, constructed entirely of new, unused parts and materials. Appliances submitted for examination under this standard shall be classified as one of the following: portable, stationary, or built-in.

Standard for Outdoor Decorative Gas Appliances (same as CSA 2.41)

ANSI Z83.4-2012 再循环的直接燃气式工业气体加热器

Recirculating Direct Gas-Fired Industrial Air Heaters

JJF 1328-2011 带弹簧管压力表的气体减压器校准规范

本规范适用于带弹簧管压力表的气体减压器的校准。

Calibration Specification for Pressure Regulators with Bourdon Tube Pressure Gauge

NF D36-392/IN2:2011 气体燃烧器和燃气器具的安全和控制装置.一般要求

Safety and control devices for gas burners and gas burning appliances - General requirements.

NF D36-392:2011 气体燃烧器和燃气器具的安全和控制装置.一般要求

Safety and control devices for gas burners and gas burning appliances - General requirements.

NF D36-121/A1:2011 国内经济 用于使用网络分配的气体燃料的家用电器外部连接的波纹金属软管密封端部配件

Économie domestique - Raccords d'extrémité avec joint d'étanchéité pour tuyaux flexibles métalliques onduleux pour le raccordement externe des appareils à usage domestique utilisant les combustibles gazeux distribués par réseaux