共找到 247 条与 标准化、质量管理 相关的标准,共 17 页
This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration. Castings are classified on the basis of the tensile strength of the iron in cast test bars.
Standard Specification for Gray Iron Castings
Standard Recommended Procedure for Qualification of Deformed and Plain Steel Bar Producing Mills
Standard Recommended Procedure for Qualification of Deformed and Plain Steel Bar Producing Mills
This standard provides procedures for determining the fatigue life and fatigue energy of 380 mm long by 50 mm thick by 63 mm wide hot-mix asphalt (HMA) beam specimens sawed from laboratory or field compacted HMA and subjected to repeated flexural bendi
Standard Method of Test for Determining the Fatigue Life of Compacted Hot-Mix Asphalt (HMA) Subjected to Repeated Flexural Bending
1.1. This specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range M6 through M100 [1/4 through 4 in.] nominal. It also covers austenitic stainless steel nuts in the size range M6 [1/4 in.] nominal and abov
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
This Twenty-Seventh Edition of Transportation Materials is published in two parts. Part I contains specifications for materials, and Part II includes methods of testing and specifications for testing equipment. Part I
Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part I: Specifications 27th Edition; Includes Table of Contents for Part IA and Part IB
This practice covers the procedure for the evaluation of the Superpave Gyratory Compactor (SGC) internal angle of gyration using an instrument capable of simulating loading conditions similar to those created by a hot-mix asphalt (HMA) specimen.
Standard Method of Test for Evaluation of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
This practice covers the determination of low-temperature properties of asphalt binders using data from the bending beam rheometer (T 313) and the direct tension tester (T 314). This practice can be used on data from unaged material or from material age
Standard Practice for Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders
This specification covers iron-chromium and iron-chromium-nickel alloy castings for general corrosion-resistant application. The grades covered by this specification represent types of alloy castings suitable for broad ranges of application, which are i
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
Independent Assurance (IA)—IA is used in industry as an internal audit and review to support the accuracy of data and processes. In the highway industry it is the outgrowth of a report from the Congressional House Committee on Oversights and Investigati
Standard Practice for Independent Assurance (IA) Programs
This practice covers the identification of elastomeric response of modified asphalt binders by means of percent recovery obtained in the Multiple Stress Creep Recovery (MSCR) test. The MSCR test is conducted using the Dynamic Shear Rheometer (DSR) at th
Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
This specification covers coal fly ash and raw or calcined natural pozzolan for use in concrete where cementitious or pozzolanic action, or both, is desired, or where other properties normally attributed to finely divided coal fly ash and raw or calcine
Standard Method of Test for Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method
This test method covers the determination of the failure strain and failure stress of asphalt binders by means of a direct tension test. It can be used with unaged or aged material using T 240 (RTFOT), R 28 (PAV). The test apparatus is designed for test
Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this procedure to establish appropriate safet
Standard Method of Test for The Qualitative Detection of Harmful Clays of the Smectite Group in Aggregates Using Methylene Blue
This method covers preparation of specimens and the measurement of the change of diametral tensile strength resulting from the effects of water saturation and accelerated water conditioning, with a freeze-thaw cycle, of compacted HMA. The results may be
Standard Method of Test for Resistance of Compacted Hot Mix Asphalt (HMA) to Moisture-Induced Damage
This test method covers procedures for preparing and testing hot-mix asphalt (HMA) to determine the dynamic modulus and phase angle over a range of temperatures and loading frequencies.
Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt (HMA)
Standard Specification for Preservatives and Pressure Treatment Processes for Timber
Standard Specification for Preservatives and Pressure Treatment Processes for Timber
Soil erosion is a natural process whereby soil particles are dislodged by rainfall and carried away by runoff. The removal rate of the soil particles is proportional to the intensity and duration of the rainfall, the volume and characteristics of the wa
EROSION AND SEDIMENT CONTROL IN HIGHWAY CONSTRUCTION 4th edition
This Twenty-Seventh Edition of Transportation Materials is published in two parts. Part I contains specifications for materials, and Part II includes methods of testing and specifications for testing equipment.
Standard Specifications for Transportation Materials and Methods of Sampling and Testing Part II Tests 27th Edition; Includes Table of Contents for Part IIA and Part IIB
This specification is applicable to frames, grates, rings, and covers for inlets, manholes, and other structures for civil engineering use where items may be placed in traffic service and load bearing is a consideration.
Standard Specification for Drainage, Sewer, Utility, and Related Castings
This specification covers three strength grades of finely ground granulated blast-furnace slag for use as a cementitious material in concrete and mortar.
Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号