R07 电子计算机应用 标准查询与下载

JT/T 1244-2019 国内集装箱多式联运运单

Domestic container multimodal transport bill

JT/T 1257.3-2019 营运货车能耗在线监测 第3部分：数据交换

Online monitoring of energy consumption of operating trucks Part 3: Data exchange

DIN EN ISO 17419:2018 智能运输系统.协同系统.全球唯一识别(ISO 17419-2018); 英文版本EN ISO 17419-2018

This standard illustrates and specifies "Global Classification and Management of ITS Applications" (GCMA).

Intelligent transport systems - Cooperative systems - Globally unique identification (ISO 17419:2018); English version EN ISO 17419:2018

ISO 17572-2:2018 智能运输系统(ITS). 地理数据库参考定位. 第2部分: 预编码定位参考(预编码轮廓)

are used to locate transport-related phenomena in an encoder system as well as in the decoder side. The whether or not components of the reference are mandatory or optional, and their characteristics. — pre-coded location references (pre-coded profile); — dynamic location references (dynamic profile). requirements for physical formats are defined. This document specifies the pre-coded LRM, comprising: — specification of pre-coded location references (pre-coded profile); — logical format for VICS link location (Annex A); — TPEG physical format for ALERT-C (TMC) location references (Annex B, C & D); — TPEG physical format for ETLs (Annex E, F & G); — TPEG physical format for Korean node-link ID references (Annex H, I & J). — logical format for Road Section Identification Data set (Annex K).

Intelligent transport systems (ITS) - Location referencing for geographic databases - Part 2: Pre-coded location references (pre-coded profile)

JT/T 1226-2018 内河航运综合信息服务电子报文数据元

Inland waterway shipping comprehensive information service electronic message data element

JT/T 1225.2-2018 内河船舶能耗在线监测 第2部分：数据交换

Online monitoring of energy consumption of inland river vessels Part 2: Data exchange

ISO 21218:2018 智能传输系统.混合通信.接入技术支持

This document specifies general technical details related to the access layer of the ITS station reference architecture specified in ISO 21217 including: — the service access point (SAP) of a communication interface (CI) as provided by the communication adaptation layer (CAL) for communication, named IN-SAP, and related service primitives and service primitive functions; — the SAP provided by the CI management adaptation entity (MAE) for management of the communication interface, named MI-SAP, and related service primitives by reference to ISO 24102-3, and service primitive functions.

Intelligent transport systems - Hybrid communications - Access technology support

JT/T 1206-2018 长江航运信息系统 数据交换共享规范

本标准规定了长江航运信息系统采用基于套接字通信接口方式、网络服务接口方式和前置机方式进行数据交换的格式、内容和技术要求。 本标准适用于长江航运数据交换平台与长江航运各类信息系统之间的数据交换与共享。其他信息系统的开发建设及系统间的数据交换与共享可参照使用。

Yangtze River shipping information system.Specifications for data exchanging and sharing

JT/T 1179-2018 交通一卡通二维码支付技术规范

Technical specifications for transportation card QR code payment

ISO 16787:2017 智能运输系统. 驻车辅助系统(APS). 性能要求和试验规程

This document covers the assisted parking system (APS) for light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with such APS. This document establishes minimum functionality requirements that the driver can expect of the system, such as the detection of suitable parking spaces, calculation of trajectories and lateral control of the vehicle. Information on the presence of relevant obstacles in the driving path of the vehicle can also be included in the functionality of such systems. This document also sets minimum requirements for failure indication as well as performance test procedures. It includes rules for the general information strategy, but does not restrict the kind of information or display system. APS is intended to provide automated parking assistance functionality to the driver. The APS searches the environment adjacent to the vehicle for suitable parking areas between other parked vehicles or markings on the road such as painted lines, evaluates the required information to calculate parking trajectories and sends steering commands to an electronic interface of the steering system for lateral control of the vehicle during the parking manoeuvre. The basic APS function is to assist the driver with lateral control of the vehicle during parking manoeuvres. As an optional extension, APS can also offer limited longitudinal control of the vehicle movement, e.g. braking assistance while manoeuvring into the parking slot. This document contains requirements for the lateral control capability of APS. It does not address longitudinal control. During the parking manoeuvre, the driver can take over the control of the vehicle movement at any time and is also fully responsible for the parking manoeuvre. APS uses object-detection devices for detection and ranging in order to search the environment for suitable parking areas. Such devices can be sensors with distance information or vision-based systems. In addition, sensors or counters, as well as relevant data available on the vehicle network (e.g. CAN), may be used to calculate the position of the vehicle relative to the parking area. APS is an extension of systems which inform the driver about obstacles in parking manoeuvres (e.g. This document does not include assisted parking systems, reversing aids and obstacle-detection devices for use on heavy commercial vehicles or on vehicles with trailers.

Intelligent transport systems - Assisted Parking System (APS) - Performance requirements and test procedures

BS ISO 14813-6:2017 智能交通系统 ITS 部门的参考模型架构 ASN.1的使用

Intelligent transport systems. Reference model architecture(s) for the ITS sector. Use of ASN.1

DIN EN 302636-5-1:2017 智能运输系统(ITS).车载通信.地理网络.第5部分:传输协议.第1子部分:基本传输协议(英文版本EEN 302 636-5-1 V2.1.1 (2017-08)的核准本作为德国标准)

This European Standard (EN) has been developed by the European Standardization Organization ETSI (European Telecommunication Standardization Institute) and specifies requirements in the telecommunications sector.

Intelligent Transport Systems (ITS) - Vehicular Communications - GeoNetworking - Part 5: Transport Protocols - Sub-part 1: Basic Transport Protocol (Endorsement of the English version EN 302 636-5-1 V2.1.1 (2017-08) as German standard)

DIN EN 302636-4-1:2017 智能运输系统(ITS).车载通信.地理网络.第4部分:点对点和点对多点通信的地理寻址和转发.第1子部分: 媒体独立功能 (英文版本EN 302 636-4-1 V1.3.1 (2017-08)的核准本作为德国标准)

This European Standard (EN) has been developed by the European Standardization Organization ETSI (European Telecommunication Standardization Institute) and specifies requirements in the telecommunications sector.

Intelligent Transport Systems (ITS) - Vehicular Communications - GeoNetworking - Part 4: Geographical addressing and forwarding for point-to-point and point-to-multipoint communications - Sub-part 1: Media-Independent Functionality (Endorsement of the Eng

ISO 13184-3:2017 智能运输系统(ITS).咨询安全性系统用经个人ITS站的导航协议.第3部分:道路导航协议 (RGP)一致性测试规范

This document specifies conformance tests for a self-conformance assessment of the supplier's P-ITS-S system. The conformance test cases follow the use case definition of ISO/TR 13184-1 and the requirements stated in ISO 13184-2 based on the Data eXchange Message (DXM) at the application level regarding the safety warning and parking guide services between — the Vehicle ITS Station (V-ITS-S) installed in the vehicle, or — a Personal ITS Station (P-ITS-S), e.g. Nomadic Device, in a vehicle or used by a pedestrian, and — a Roadside ITS Station (R-ITS-S) installed at the roadside. The primary but not exclusive purpose of this document is to provide information to the P-ITS-S system provider to build and test the P-ITS-S system against the conformance test cases. This final step in the development process of the P-ITS-S system ensures providers that their P-ITS-S system meets a high degree of functional requirements expected by the end user.

Intelligent transport systems (ITS) - Guidance protocol via personal ITS station for advisory safety systems - Part 3: Road guidance protocol (RGP) conformance test specification

JT/T 1174.2-2017 公路水路建设与运输市场信用信息分类编码与格式 第2部分:水运工程建设市场

JT/T 1174的本部分规定了水运工程建设市场信用信息分类与编码规则、项目信息、从业企业信用信息、从业人员信用信息及代码。 本部分适用于水运工程建设市场信用信息管理与服务有关信息系统设计、建设和使用。

Credit information classified coding and format for construction and transportation market of highway and waterway.Part 2: Waterway engineering construction market

JT/T 1175.5-2017 便利海运公约电子表格 第5部分:船员名单

JT/T 1175的本部分规定了便利海运公约电子表格船员名单报文定义、XML报文格式和平台报文格式。 本部分适用于履行国际海事组织便利运输公约的船公司与口岸监管部门之间的数据交换。

Spreadsheet for convention facilitation of international maritime traffic.Part5: Crew list

JT/T 1175.6-2017 便利海运公约电子表格 第6部分:旅客名单

JT/T 1175的本部分规定了便利海运公约电子表格旅客名单的报文定义、XML报文格式和平台报文格式。 本部分适用于履行国际海事组织便利运输公约的船公司与口岸监管部门之间的数据交换。

Spreadsheet for convention facilitation of international maritime traffic.Part 6: Passenger list

JT/T 1175.7-2017 便利海运公约电子表格 第7部分:危险货物舱单

JT/T 1175的本部分规定了便利海运公约电子表格危险货物舱单的报文定义、XML报文格式和平台报文格式。 本部分适用于履行国际海事组织便利运输公约的船公司与口岸监管部门之间的数据交换。

Spreadsheet for convention facilitation of international maritime traffic.Part7:Dangerous goods manifest

JT/T 1174.1-2017 公路水路建设与运输市场信用信息分类编码与格式 第1部分:公路建设市场

JT/T 1174的本部分规定了公路建设市场信用信息分类与编码规则、项目信息、从业企业信用信息、从业人员信用信息及代码。 本部分适用于公路建设市场信用信息管理与服务有关信息系统的设计、建设和使用。

Credit information classified coding and format for construction and transportation market of highway and waterway.Part 1: Highway construction market

JT/T 1174.4-2017 公路水路建设与运输市场信用信息分类编码与格式 第4部分:水路运输市场

JT/T 1174的本部分规定了水路运输市场信用信息分类与编码规则、从业单位信用信息、从业人员信用信息及代码。 本部分适用于水路运输市场信用信息管理与服务有关信息系统设计、建设和使用。

Credit information classified coding and format for construction and transportation market of highway and waterway.Part 4: Waterway transportation market