S11 线路构件 标准查询与下载
共找到 584 条与 线路构件 相关的标准，共 39 页
This document applies to hydraulic dampers (excluding end mountings) used on rail vehicles. The dampers covered in this standard include: -- dampers that control the dynamic behaviour of vehicle: -- suspension dampers, (e.g. primary vertical dampers, secondary vertical dampers and secondary lateral dampers), -- yaw dampers, -- roll dampers, -- inter-vehicle dampers, -- dampers that control the dynamic behaviour of mechanical systems: -- pantograph dampers, -- etc. All relevant terminology which is specific to the subject is defined in this document.
Railway applications - Suspension components - Hydraulic dampers; English version of DIN EN 13802
- ICS
- 45.040
- CCS
- S11
- 发布
- 2005-11
- 实施
TB/T 1632的本部分规定了钢轨固定式和移动式闪光焊接的要求、试验方法和检验规则。 本部分适用于50kg/m~75kg/m钢轨的闪光焊接。
Rail Welding Part 2: Flash Welding
- ICS
- CCS
- S11
- 发布
- 2005-06-27
- 实施
- 2005-06-27
本标准规定了43kg/m~75kg/m钢轨轨道的混凝土枕(宽枕)用轨下竹制调高垫板和木制调高垫板的型式尺寸、技术要求、试验方法、检验规则、包装与储运。 本标准适用于混凝土枕用轨下竹制调高垫板和木制调高垫板(以下简称调高垫板)。
Technical conditions for lowering height-adjusting pads for concrete sleepers
- ICS
- CCS
- S11
- 发布
- 2004-10-23
- 实施
- 2005-01-15
This document applies to hydraulic dampers (excluding end mountings) used on rail vehicles. The dampers covered in this standard include: — dampers that control the dynamic behaviour of vehicle: — suspension dampers, (e.g. primary vertical dampers, secondary vertical dampers and secondary lateral dampers), — yaw dampers, — roll dampers, — inter-vehicle dampers, — dampers that control the dynamic behaviour of mechanical systems: — pantograph dampers, — etc. All relevant terminology which is specific to the subject is defined in this document.
Railway applications - Suspension components - Hydraulic dampers
- ICS
- 45.040
- CCS
- S11
- 发布
- 2004-09-23
- 实施
- 2004-09-23
This document describes measurement procedures by means of which the insertion loss of those resilient (elastic) elements can be determined in a laboratory as well as in situ.
Mechanical vibration - Resilient elements used in railway tracks - Part 3: Experimental evaluation of insertion loss from artificial excitation of mounted track systems (in a test rig and in situ)
- ICS
- 93.100;17.160
- CCS
- S11
- 发布
- 2004-09
- 实施
Railway applications/track - Track geometry quality - Part 1 : characteristics of track geometry.
- ICS
- 93.100
- CCS
- S11
- 发布
- 2004-07-01
- 实施
- 2004-07-05
Railway applications/Track - Track geometry quality - Part 1: Characterisation of track geometry; German version EN 13848-1:2003
- ICS
- 93.100
- CCS
- S11
- 发布
- 2004-05
- 实施
This document applies to parabolic springs as suspension elements for use on railway vehicles. This document constitutes guidelines for: design, specification of technical and quality requirements; the approval procedure and quality assurance of production methods; the examination and tests to be carried out; the delivery conditions.#,,#
Railway applications - Suspension components - Parabolic springs, steel; German version EN 14200:2004
- ICS
- 45.040
- CCS
- S11
- 发布
- 2004-05
- 实施
Railway applications - Track - Rail - Part 1 : Vignole railway rails 46 kg/m and above.
- ICS
- 45.080
- CCS
- S11
- 发布
- 2004-04-01
- 实施
- 2004-04-05
Railway applications - Track - Switches and crossings - Part 2 : requirements for geometric design.
- ICS
- 93.100
- CCS
- S11
- 发布
- 2004-03-01
- 实施
- 2004-03-05
Electromagnetic Compatibility (EMC) Part 1: General Section 1: Application and Interpretation of Fundamental Definitions and Terms
General requirements for rolled or welded structural quality steel/ Structural quality steel Sixth Edition
- ICS
- CCS
- S11
- 发布
- 2004-02-01
- 实施
本标准规定了绝缘轨距杆(以下简称“轨距杆”)的组成、分类及适用环境，要求，试验方法，检验规则，标志与包装。 本标准适用于标准轨距线路设有轨道电路区段使用的轨距杆，非标准轨距线路的轨距杆可参考使用。
Technical specification for insulated gauge rods
- ICS
- 45.040
- CCS
- S11
- 发布
- 2004-01-30
- 实施
- 2004-08-01
Technical specification for the heat treated rails
- ICS
- 45.080
- CCS
- S11
- 发布
- 2004-01-30
- 实施
- 2004-03-01
This European Standard applies to parabolic springs as spring elements for rail vehicles. This European Standard is a guide to the following subjects: — design; — specification of technical and qualitative requirements; — approval procedures and quality assurance of production methods; — tests and inspections to be carried out; — delivery conditions.
Railway applications - Suspension components - Parabolic springs, steel
- ICS
- 45.040
- CCS
- S11
- 发布
- 2004-01-28
- 实施
- 2004-01-28
This Part of this European Standard specifies the requirements for the homologation of track geometry quality parameters as measured by various measuring devices. These measuring devices are described in Parts 2, 3, 4 of the standard. This European Standard applies to all track geometry parameters including track gauge, longitudinal level, alignment, cross level (cant / superelevation) and twist. It defines each parameter and specifies the requirements for measurement, the analysis methods and the presentation of results.
Railway applications/Track - Track geometry quality - Part 1:Characterisation of track geometry
- ICS
- 93.100
- CCS
- S11
- 发布
- 2004-01-13
- 实施
- 2004-01-13
