S32 制动系统 标准查询与下载

DIN EN 13452-2:2005 轨道交通.制动.公共运输制动系统.第2部分:试验方法

Railway applications - Braking - Mass transit brake systems - Part 2: Methods of test; German version EN 13452-2:2003

DIN EN 13452-1:2005 轨道交通.制动.公共运输制动系统.第1部分:性能要求

This document specifies minimum and maximum limiting requirements for braking systems and performance. The Transport Authority defines the particular parameters where required in this document and specifies any additional braking requirements to the vehicle builder/braking system supplier. This document specifies requirements and performances for the braking of vehicles for urban transport systems, running on steel or rubber tyred wheels and guided by steel rails or other equivalent means.#,,#

Railway applications - Braking - Mass transit brake systems - Part 1: Performance requirements; German version EN 13452-1:2003

DIN 25653:2004 铁路车辆部件的名称.撒砂机

This standard applies to sand distributos for rail-vehicles. It defines terms of construction parts.

Terms for railway vehicle parts - Sand distributor

DIN 27205-1:2004 铁路车辆的状况.制动器.第1部分:脚踏制动器机械部分

This document applies to the mechanical part of tread brakes.

State of railway vehicles - Brake - Part 1: Tread brake, mechanical part

DIN 27205-6:2004 铁路车辆的状况.制动器.第6部分:电磁牵引制动器

State of railway vehicles - Brake - Part 6: Magnetic track brake

DIN 27205-2:2004 铁路车辆的状况.制动器.第2部分:盘式制动器机械部分

This document applies to the mechanical part of disc brakes.

State of railway vehicles - Brake - Part 2: Disc brake, mechanical part

UIC O 833-2004 制动三角形物体供应的技术规范

Technical specification for the supply of brake triangles

BS EN 13979-1:2003+A1:2009 轨道交通.轮副和转向架.整轮.技术验收程序.第1部分:锻制和轧制轮

The aim of this European Standard is to define the requirements that a monobloc wheel of a freight of passenger railway vehicle non-powered axle shall meet in order to be able to be used on a European network. For wheels of powered axles or wheels with noise dampers, the requirements may be amended or supplemented. For light vehicles and tramways, other standards or documents accepted by the customer and supplier may be used. This European Standard only applies to wheels of new design. These requirements are intended to assess the validity of the design choice for the proposed use. The assessment of these requirements is the technical approval procedure. This European Standard is applicable to forged and rolled wheels for which the quality requirements are defined in EN 13262.

Railway applications - Wheelsets and bogies - Monobloc wheels - Technical approval procedure - Part 1:Forged and rolled wheels

TB/T 3086-2003 铁道车辆金属护套橡胶软管技术条件

本标准规定了铁道车辆制动系统、供风系统用金属护套橡胶软管的型式与基本尺寸、技术要求、试验方法与性能要求、标志、检脸规则、包装、贮存、运翰等。 本标准适用于新造铁道车辆制动系统、供风系统用金属护套橡胶软管。

Technical specification of metal-jacket rubber composite hoses for rolling stock

TB/T 3087-2003 机车车辆总风软管连接器总成

本标准规定了铁路机车车辆用总风软管连接器总成的型式尺寸与标记、技术要求、试验方法与性能要求、检验规则及包装、贮存、运翰、质蚤保证期等。 本标准适用于铁路机车车辆用总风软管连接器总成。

Main hose coopling assemblies for locomotive and car

UIC OR 543-2003 制动器.除牵引机车和牵引车辆以外的其他客货车辆的管理规则

Brakes - Regulations governing the equipment of trailing stock

TB/T 3078-2003 铁道车辆高磷闸瓦超声波检验

本标准规定了新制铁道车辆外瓦背型高碑闸瓦超声波检验方法、检验规则及质量纷收要求。 本标准适用于新制铁道车辆外瓦背型高磷闸瓦的瓦背与瓦体熔接质量的检验。

Ultrasonic inspection of high-phosphorous cast iron brake shoes for railway rolling stock

BS EN 13452-1:2003 轨道交通.制动.公共运输制动系统.性能要求

This European Standard specifies minimum and maximum limiting requirements for braking systems and performance. The Transport Authority defines the particular parameters where required in this European Standard and specifies any additional braking requirements to the vehicle builder/braking system supplier. This European Standard specifies requirements and performances for the braking of vehicles for urban transport systems, running on steel or rubber tyred wheels and guided by steel rails or other equivalent means. This European Standard applies to vehicles operating on: — tramways; — light railways; — metros on steel wheels; — metros on rubber tyred wheels; — Commuter/Regional railways; and is applicable to: — all newly designed vehicles; — all major refurbishments, if these include either redesign or extensive modifications to the brake system; — any new builds of existing designs of vehicles. For this type of vehicle, the Transport Authority may specify performance values different from those defined in this European Standard. This European Standard does not apply to special transport systems, e.g. suspended monorail, rack and pinion lines, isolated operations such as scenic railways, special duty vehicles, etc. Transport Authorities shall ensure that specifications include this European Standard as part of the brake system requirements. Suppliers shall identify, at the time of tendering, any non-compliances against this European Standard. Compliance with the functional and performance requirements defined in this European Standard is verified by testing in accordance with EN 13452-2.

Railway applications - Braking - Mass transit brake systems - Performance requirements

BS EN 13452-2:2003 轨道交通.制动.公共运输制动系统.试验方法

This European Standard specifies test requirements for the braking of vehicles for urban transport systems, running on steel or rubber tyred wheels and guided by steel rails or other equivalent means. This European Standard applies to vehicles operating on: — tramways; — light railways; — metros on steel wheels; — metros on rubber tyred wheels; — commuter/regional railways; and is applicable to: — all newly designed vehicles; — all major refurbishments, if these include either redesign or extensive modifications to the brake system; — any new builds of existing designs of vehicles. This European Standard does not apply to special transport systems, e.g. suspended monorail, rack and pinion lines, special duty vehicles, etc. Transport Authorities shall ensure that specifications include this European Standard as part of the brake system requirements. Suppliers shall identify, at the time of tendering, any non-compliances against this European Standard.

Railway applications - Braking - Mass transit brake systems - Methods of test

TB/T 3067-2003 机车车辆制动管系用法兰接头

本标准规定了铁道机车车辆不锈钢制动管系用法兰接头的型式、规格、尺寸、技术要求及标记等。 本标准适用于铁道机车车辆不锈钢制动管系用法兰接头。

Flange connectors for brake assembly of locomotive and car

TB/T 1492-2002 铁路车辆制动机单车试验方法

本标准规定了104,F8,GK,103,120型车辆制动机装车后的单车试验方法。 本标准适用于装有空气制动装置的铁道车辆，亦适用于加装电空制动装置的铁道车辆。

The method of single car for railway passenger car and wagon brake

JIS E 4309:2001 铁路车辆的复合制动瓦.质量要求

この規格は，鉄道車両の車輪踏面に用いる合成制輪子(以下，踏面用制輪子という。)及び鉄道車両のプレーキディスク面に用いる合成制輪子(以下，ブレーキディスク用制輪子という。)の品質要求事項について規定する。また，踏面用制輪子とブレーキディスタ用制輪子とを総称しで，以下，制輪子という。

Composition brake shoes for railway rolling stock -- Quality requirements

JIS E 7501:2001 铁路车辆用铸铁制动瓦的性能试验方法和检查方法

この規格は，鉄道車両の車輪踏面に用いる鋳鉄制輪子(以下，制輪子という。)の実物大プレーキ試験機(以下，試験機という。)での性能試験方法及び検査方法について規定する。

Method of performance test and inspection methods for cast iron brake shoes of railway rolling stock

TB/T 3005-2001 机车用粉末冶金闸瓦

本标准规定了铁道电力、内燃机车用粉末冶金闸瓦的技术要求、试验方法、检验规则和标志、包装、运输与贮存等要求。 本标准适用于运行速度不超过160km/h、轴重不超过25t的铁道电力、内燃机车用粉末冶金闸瓦(以下简称闸瓦)。 对于运行速度在160km/h到200km/h之间、轴重不超过25t的铁道电力、内燃机车粉末冶金闸瓦可参照使用本标准。

Powder metallurgy brake shoe for locomotive

TB/T 3010-2001 铁道车辆滚动轴承高碳铬轴承钢订货技术条件

本标准规定了热轧高碳铬轴承钢圆钢的尺寸、外形、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于制造铁道车辆滚动轴承套圈和滚动体用热轧圆钢。

Technical conditions for ordering high carbon chromium bearing steel for rolling bearings of railway vehicles