共找到 384 条与 走行部分 相关的标准,共 26 页
本标准规定了机车柴油机机体主轴承孔同轴度测量方法和数据处理方法。 本标准适用于各种类型的机车柴油机机体主轴承孔同轴度的测量。
Measuring method of coaxiality of main bearing hole of locomotive diesel engine block
本标准规定了测量机车柴油机曲轴主轴颈径向圆跳动的方法。 本标准适用于机车柴油机曲轴主轴颈径向圆跳动的测量。
Measuring Method of Radial Circular Runout of Crankshaft Main Journal of Locomotive Diesel Engine
本标准规定了42726QT圆柱滚子轴承(以下简称轴承)的型式、墓本尺寸及技术要求。 本标准适用于铁遭客车车轴用滚动轴承。
Basic dimensions and technical requirements of 42726QT cylindrical roller bearings
この規格は,JIS E 4502に規定する車軸(以下,車軸という。)の輪座の強度設計方法について規定する。備考1.この規格の引用規格を,次に示す。JIS E 4502鉄道車両用車軸2.この規格の中で{ }を付けて示してある単位及び数値は,従未単位によるのであって,参考として併記したものである。
Railway rolling stock -- Design methods for strength of axles
Rail vehicle axle types and basic dimensions
Vibration dampers for rail vehicles - Rotative damper
Rail Vehicle Axle Flaw Detection Method Ultrasonic Flaw Detection of In-service Axles
Ultrasonic Flaw Control of Newly Made Axle Axle by Rail Vehicle Axle Flaw Detection Method
Specifies requirements (chemical composition, physical and mechanical properties, dimensional characteristics, marking) for the manufacture and supply of rough-rolled tyres of unalloyed steels. Also deals with information to be supplied by the purchaser, classification, inspection, delivery, guarantee. In addition, the requirements of ISO 404 are applicable.
Railway rolling stock material - Part 1: Rough-rolled tyres for tractive and trailing stock; technical delivery conditions
Specifies requirements (chemical composition, mechanical properties, appearance and soundness, machining allowance and dimensional tolerances, residual imbalance, marking) for the manufacture and supply of rolled, forged or cast solid wheels of unalloyed steels. Also deals with information to be supplied by the purchaser, classification, manufacture, inspection, delivery. Annnex A describes a procedure for shot peening web surfaces of wheels. In addition, the requirements of ISO 404 are applicable.
Railway rolling stock material - Part 6: Solid wheels for tractive and trailing stock; technical delivery conditions
本标准规定了铁道客车滚动轴承用轴箱装置(包括轴箱体、前盖、后盖、顶套、防尘挡圈、密封件)的技术要求、试验方法、检验规则、标志、包装与运输等要求。 本标准适用于铁道客车滚动轴承用毛毡密封式、橡胶密封式及金属迷宫密封式轴箱。
Specifications for axle box devices for railway passenger car rolling bearings
本标准规定了铁道货车转向架基础制动装置的技术要求,测量方法,检验规则。 本标准适用于新造铁道货车二轴转向架单侧制动的带有各种摩擦系数的闸瓦的基础制动装置。
Technical specification of railway freight car bogie foundation brake device
本标准规定了货车水平轮链式手制动机(以下简称手制动机)的技术要求、组装要求及性能要求。 本标准适用于手制动机的制造与组装。
Specifications for horizontal wheel chain hand brakes for trucks
Railway rolling stock. Wheelsets. Quality requirements.
Requirements for the manufacture, inspection and testing of centres in the machined, part machined or ready for assembly condition for tractive and trailing stock.
Railway rolling stock materials - Specification for forged and rolled wheel centres
Requirements for the manufacture, inspection and testing of rolled steel tyres for tractive and trailing stock.
Railway rolling stock materials - Specification for forged and rolled tyres
This Part of BS 5892 specifies requirements for the manufacture, inspection and testing of rolled or forged monobloc wheels in the unmachined, finish machined or ready for assembly condition for traction and trailing stock. This Part of BS 5892 includes requirements for the dimensions, tolerances and surface finish that are to be adopted unless otherwise specified in the design drawing.
Railway rolling stock materials — Part 3: Specification for monobloc wheels for traction and trailing stock
Requirements for the assembly of wheelsets.
Railway rolling stock materials - Specification for wheelsets for traction and trailing stock
Requirements for the manufacture, inspection and testing of rolled or forged wheels in the unmachined, finish machined or ready for assembly condition.
Railway rolling stock materials - Specification for monobloc wheels for traction and trailing stock
This Part of BS 5892 specifies requirements for the manufacture, inspection and testing of forged and/or rolled axles (solid or hollow) in the unmachined, part machined or ready for assembly condition for traction and trailing stock. This Part of BS 5892 includes requirements for the dimensions, tolerances and surface finish that are to be adopted unless otherwise specified in the design drawing. NOTE The titles of the publications referred to in this Part of BS 5892 are listed on the inside back cover. ?This Part of BS 5892 is not applicable to axles designed to BS EN 13103 and BS EN 13104, the manufacture, inspection and testing of which are specified in BS EN 13261
Railway rolling stock materials — Part 1: Specification for axles for traction and trailing stock
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号