S34 通用零部件 标准查询与下载

JIS E 5001:1988 铁路车辆断路器试验方法

この規格は，鉄道車両に用いる直流の断流器(以下，断流器という。)の試験方法について規定する。備考1.この規格の中で{ }を付けて示してある単位及び数値は，従来単位によるものであって，参考として併記したものである。2.この規格を適用する断流器を，次に示す。

Methods of test for line breakers of railway rolling stock

DIN 1596:1988 带拧紧机构的轻型管夹.有轨车辆用单端头的管夹

This standard applies to sleepers being used predominantely in rail-vehicles, and not being subject of any other standard.#,,#

Light pipe clips with pipe-tightening; single-ended for rail vehicles

DIN 1597:1988 带拧紧机构的轻型管夹.有轨车辆用双端头的管夹

Light pipe clips with pipe-tightening; double-ended for rail vehicles

DIN 1593:1988 带拧紧机构的重型管夹.有轨车辆用双端头的管夹

Heavy pipe clips with pipe-tightening; double-ended for rail vehicles

DIN 1592:1988 带拧紧机构的重型管夹.有轨车辆用单端头的管夹

This standard applies to sleepers being used predominantely in rail-vehicles, and not being subject of any other standard.#,,#

Heavy pipe clips with pipe-tightening; single-ended for rail vehicles

TB/T 1820-1987 钢丝编织胶管及接头球头式

Steel wire braided rubber hose and joint ball head type

TB/T 1977-1987 球形止阀、弯形止阀、闸阀技术条件

Technical conditions for spherical check valve, curved check valve and gate valve

TB/T 1822-1987 钢丝编织胶管及接头混合式

Steel wire braided hose and joint hybrid

TB/T 1838-1987 铁道车辆用路徽标记

Road emblems for railway vehicles

TB/T 1821-1987 钢丝编织胶管及接头铰接式

Steel wire braided hose and joint hinged

TB/T 1970-1987 货车三通阀在701型试验台上的试验方法

The test method of the three-way valve of the truck on the 701 type test bench

TB/T 1911.2-1987 弹条Ⅰ型调高扣件 轨距挡板

Elastic bar type I height adjustment fastener gauge baffle

TB/T 1911.1-1987 弹条Ⅰ型调高扣件 组装配制

Assembling and manufacturing of spring bar type I height adjustment fastener

TB/T 1911.3-1987 弹条Ⅰ型调高扣件 挡板座

Elastic strip type I height adjustment fastener baffle seat

TB 1896-1987 铁路客车发电装置试验台技术条件

Specifications for railway passenger car power generation device test bench

TB/T 1891-1987 内燃、电力机车门锁技术条件

Specifications for door locks of internal combustion and electric locomotives

DIN 1552-2:1987 轨道车辆用轴套.钢制压配合轴套

This standard applies preferably to brake-mechanisms in rail-vehicles. Concerning origin of this standard, the reader may refer to former editions, especially to the edition of November 1977.

Bushes for rail vehicles; press-fit bushes (pressend on) of steel

DIN 1552-1:1987 轨道车辆用轴套.钢制压配合轴套

This standard applies preferably to brake-mechanisms in rail vehicles. Corresponding bolts can be found in DIN 5525 and DIN 5526. Concerning origin of this standard, the reader may refer to former editions, especially to the edition of November 1977.

Bushes for rail vehicles; press-fit bushes of steel

NF F33-001:1986 铁路车辆, 夹紧螺栓

Rolling stock-clamp-bolts.

TB/T 1758-1986 机车车辆弹簧喷丸技术条件

Rolling Stock Spring Shot Peening Technical Conditions