S35 牵引电气设备 标准查询与下载

TB/T 3021-2001 铁道机车车辆电子装置

本标准适用于铁道机车车辆（包括地毯、城轨车辆）上安装的所有控制、调节、保护、供电等电子装置。这些装置可有车上蓄电池或发电机供电，也可能有直接或间接与接触网相连的低压电源（变压器、分压器、辅助电源）供电；在本标准中，电子装置是指以半导体器件和其他通用元器件为主组成的装置，这些元器件通常安装在印制板上。 注：本标准也适用于（电流、电压、速度等）传感器和电力电子装置触发板，但成套触发装置应符合IEC61287-1。 本标准不是用于主电路和辅助电路的电力电子装置。

Electronic devices for railway rolling stock

TB/T 1608-2001 机车车辆用三相异步电机基本技术条件

本标准规定了机车车辆用三相异步电机的技术特性、试验方法、验收规则及要求。 本标准适用于干线铁道用电力机车、内燃机车、动车组和车辆用的劈相机和由劈相机、或由交流辅助发电机、或由电子变流器供电的用于驱动空气压缩机、风机或其他辅助机械的三相鼠笼型异步电动机，但不包括控制电机。 如选用有特殊要求的三相异步电动机如变极电动机等拖动上述辅助机械，除了满足该系列的技术条件外，还应满足本标准有关条文的规定。 以 下，三相鼠笼型异步电动机简称电动机，劈相机和电动机泛指电机。

Basic technical specifications of three-phase asynchronous motors for rolling stock

TB/T 1398-2001 机车电气设备文字符号

本标准规定了铁道机车电气设备、装置和元器件文字符号，用于说明电气设备、装置和元器件的名称、功能、状态和特征。 本标准适用于铁道机车电气图样和技术文件的编制。动车、动车组上的电气设备文字符号也可参照采用。 本标准不适用于电气产品的型号编制与命名。

Character symbols of locomotive electrical equipment

TB/T 3022-2001 TD系列单元控制台技术条件

本标准规定了TD系列单元控制台、表示盘的型号、规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于铁路信号及其他领域TD系列单元控制台、表示盘的设计、制造和检验。

TD series unit console technical conditions

TB/T 3023-2001 铁路光缆接头盒主要技术条件

本标准规定了铁路光缆接头盒的产品分类、型号、结构、组成和主要技术要求。 本标准适用于铁路通信光缆线路中架空、管道(隧道)、直埋等敷设方式安装使用的光缆接头盒。 本标准不适用于海底、架空地线复合光缆(OPGW)、全介质自承式架空光缆(ADSS)和应急光缆接头盒及金属材料的光缆接头盒。

Main technical specifications of railway optical cable splice box

TB/T 1484.1-2001 铁路机车车辆电缆订货技术条件 第1部分：额定电压3kV及以下电缆

本标准规定了额定电压3kV及以下铁路机车车辆用电缆的分类、技术要求和验收规则。 本标准适用于铁路机车车辆，也适用于其他轨道车辆。

Technical conditions for ordering railway rolling stock cables Part 1: Cables with rated voltage 3kV and below

TB/T 1675-2001 铁道客车空气调节试验方法

本标准规定了铁道客车静置状态热工性能试验室的条件、试验程序、测试方法、试验数据的整理和计算及试验报告的形式。 本标准适用于新造铁道空调客车，其他有特殊要求的铁道空调客车也可参照使用。

Air Conditioning Test Method for Railway Passenger Cars

BS EN 50152-3-3:2001 轨道交通.固定装置.交流电开关的专门要求.交流牵引系统特殊使用的测量、控制和保护装置.单相感应电压变压器.单相电压变压器

To be read in conjunction with BS EN 60044-2:1999

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase inductive voltage transformers - Single-phase voltage transform

BS EN 50152-3-2:2001 轨道交通.固定装置.交流电开关的专门要求.交流牵引系统特殊使用的测量、控制和保护装置.单相电流变压器

To be read in conjunction with BS EN 60044-1:1999

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase current transformers - Single-phase current transformers

IEC 60322:2001 轨道交通.机车车辆的电气设备 开敞式结构电力电阻器的规则

This international Standard gives the rules for all power resistors (for example, braking, heating, snubber and filter) used in the power and auxiliary circuits on board rolling stock irrespective of the circuit and the type of vehicle where they are used. These resistors are generally of open construction and are used in polluted areas. The construction consists of resistor elements of grids, plates, strips, ribbons or wires. NOTE Certain of these rules may, after agreement between user and manufacturer, be used for electrical equipment installed on other vehicles such as mine locomotives, trolley buses, etc. This standard states - the characteristics of the resistors; - the service conditions with which the power resistors have to comply; - the tests intended for confirming that these conditions have been met and the methods to be adopted for these tests; - the information to be marked on, or given with, the resistors. This standard does not give requirements relating to general service conditions and general rules which are given in IEC 60077-1. The object of this standard is to adapt the general rules given in IEC 60077-1 to power resistors for rolling stock in order to obtain uniformity of requirements and tests throughout the corresponding range of components and to avoid the need for testing to two different standards.

Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction

IEC 61992-3:2001 轨道交通.固定设施.直流开关设备.第3部分:户内隔离器及隔离器式开关

This part of IEC 61992 specifies requirements for d.c. disconnectors, switch disconnectors and earthing switches for use in indoor fixed installations of traction systems. NOTE 1 Switchgear assemblies, electromagnetic compatibility (EMC) and dependability are not covered in this part of IEC 61992, but rather by other parts of this standard or other standards as indicated in IEC 61992-1. NOTE 2 In this standard, the word "unit" means "disconnector and/or switch disconnector and/or earthing switch" as defined in 3.1.4, 3.1.5 and 3.1.6 of IEC 61992-1. NOTE 3 Disconnectors, switch disconnectors and earthing switches may have electrically latched mechanisms and, in such cases, may be indicated with the current term of "power contactors".

Railway applications - Fixed installations; DC switchgear - Part 3: Indoor disconnectors and switch disconnectors

IEC 61992-1:2001 轨道交通.固定设施.直流开关设备.第1部分:总则

The IEC 61992 series specifies requirements for d.c. switchgear and controlgear and is intended to be used in fixed electrical installations with nominal voltage not exceeding 3 000 V d.c, which supply electrical power to vehicles for public guided transport, i.e. railway vehicles, tramway vehicles, underground vehicles and trolley-buses.

Railway applications - Fixed installations - DC switchgear - Part 1: General

IEC 61992-2:2001 轨道交通.固定设施.直流开关设备.第2部分:断路器

This part of IEC 61992 specifies requirements for d.c. circuit-breakers for use in fixed installations of traction systems. NOTE Switchgear assemblies, electromagnetic compatibility (EMC) and dependability are not covered in this part of IEC 61992, but by other parts of this standard or by other standards, as indicated in IEC 61992-1.

Railway applications - Fixed installations; DC switchgear - Part 2: Circuit-breakers

ANSI/IEEE 1476:2000 火车客车辅助电力系统接口标准

Prescribes the electrical interface between the components comprising the auxiliary power systems and their electrical interface with other train-borne systems. As such, this standard treats the auxiliary power system components (static inverters and converters, low voltage dc power supplies, back-up battery systems and battery chargers) as black boxes and addresses only their interface requirements.

Standard for Passenger Train Auxiliary Power Systems Interfaces

TB/T 1703-2000 电力机车用交流电度表

本标准规定了电力机车用交流电度表(以下简称为机车表)的型式与基本参数、要求、试验方法、检验规则、标志、包装及贮存等。 本标准适用于固定安装使用的，测量额定频率为50H z的交流电能的感应式交流有功电度表。

AC watt-hour meter for electric locomotive

TB/T 3002-2000 直流、脉流牵引电动机负荷试验台技术条件

本标准规定了铁路内燃、电力机车用直流或脉流牵引电动机负荷试验台(以下简称试验台)的主电路基本型式、技术要求、试验方法、检验规则及标志、包装等。 本标准适用于直流、脉流牵引电动机出厂及检修例行试验用负荷试验台。

Technical conditions of DC and pulse current traction motor load test bench

TB/T 3001-2000 铁路机车车辆用电子变流器供电的交流电动机

本标准规定了铁路机车车辆上的由电子变流器供电的交流电动机的技术要求，为通过试验确定电动机的性能并为评定该电动机对某一规定负载工况的适应性以及与其它电动机进行比较提供依据。 本标准适用于铁路机车车辆上的由电子变流器供电的交流电动机。 非铁路机车车辆用的有电子变流器供电的电动机，比如公路车辆上使用的电动机也可参照本标准。

AC motors powered by electronic converters for railway rolling stock

JIS E 6101:2000 铁路车辆.直流牵引电动机.试验方法

この規格は，鉄道車両の直流又は脈流用主電動機(以下，電動機という。)の試験方法について規定する。

Railway rolling stock -- DC traction motors -- Test methods

LD/T 71.15-2000 铁路工业电机线圈工劳动定额制定

Formulation of Labor Quota for Motor Coil Workers in Railway Industry

TB 10065-2000 铁路电力变、配电所设计规范

Code for design of railway electric transformer and distribution station