S35 牵引电气设备 标准查询与下载

BS EN 50261:1999 轨道交通.电子设备安装

This standard applies to the mechanical design features for the installation of all electronic equipment as defined in EN 50155 and complying with HD 493. For individual or specialized equipment not complying with HD 493, no specified dimensions are defined; this type of equipment shall be designed to meet the particular requirements. These requirements for racks and enclosures do not exclude other solutions (e.g. single board mounting within an equipment box, future developments, etc.) This standard also covers particular requirements for the interconnection to the vehicle wiring.

Railway applications - Mounting of electronic equipment

BS EN 50152-2:1999 轨道交通.固定装置.交流开关专门要求.单相断路器,接地开关及与高于1KV相接的开关

To be read in conjunction with BS EN 60129:1994

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Single-phase disconnectors, earthing switches and switches with Um above 1 kV

BS EN 50122-2:1999 轨道交通.固定设备.直流牵引系统引起的杂散电流效应保护措施

This standard specifies requirements for protective provisions against the effects of stray currents which result from the operation of d.c. traction systems. As experience for several decades has not shown evident corrosion effects from a.c. traction systems and actual investigations are not completed, this standard only deals with stray currents flowing from a d.c. traction system. This standard applies to all metallic fixed installations which form part of the traction system, and also to any other metallic components located in any position in the earth, which may carry stray currents resulting from the operation of the railway system. This standard applies to all new electrification of a d.c. railway system. The principles may also be applied to existing electrified systems where it is necessary to consider the effects of stray currents. The range of application includes: —railways; —guided mass transport systems such as: tramways, elevated and underground railways, mountain railways, trolleybus systems and magnetic levitated systems; —material transportation systems. This standard does not apply to: a) mine traction systems in underground mines; b) cranes, transportable platforms and similar transportation equipment on rails, temporary structures (e.g. exhibition structures) in so far as these are not supplied directly from the contact line system and are not endangered by the traction power supply system; c) suspended cable cars; d) funicular railways; e) maintenance work.

Railway applications - Fixed installations - Protective provisions against the effects of stray currents caused by d.c. traction systems

IEC 60077-2:1999 轨道交通.机车车辆用电气设备 第2部分:电工元件 一般规则

在GB／T 21413．1的基础上，本部分规定了机车车辆主电路、辅助电路、控制和指示电路中安装的 所有电工器件的通用规则。 本部分日的是使GB／T 21413．1所规定的·—般条件适用于机车车辆上的所有电工器件，以保证相 应器件技术要求和试验的一致性。 电工器件主要是指开关设备和控制设备，包括继电器、开关、电阻器、熔断器等，但不含其控制部分。 注l：目前，通常也将电子元器件或电子组件纳入电工器件中。本部分并不适用于电子设备，但不能因为电工器件 中装有电子元器件而将其排除在本部分范围之外。 电子组件应符合相应的标准(1EC 60571)。 汴2：经用户与制造商协商后，某些规则可适用于铁路机车车辆之外的机车车辆(如矿山机车、有轨电车)上的电工 器件。 本部分给出了： a) 器件特性； b) 器件应当遵循的使用条件； c) 用于验证器件在使用条件下符合特性的试验项目及试验方法； d) 电器上应标识或给山的信息。 本部分不适用于工业用电器，它们应符合各自的产品标准。为保证这些电器在机车车辆上正常工 作，本部分仅规定了这些电器在铁路应用条件下的特殊要求。为此，应有专门的文件来说明工业电器应 满足的附加要求，如： ——适用于哪—‘种工况(例如控制电压、环境条件等)； ———不需要承受特定机车车辆使用条件的安装和使用； 进行附加试验以验证这些器件能够满足机车车辆使用条件。

Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules

TB/T 2947-1999 列车干线供电技术条件

本标准规定了由机车将接触网的电能直接或经降压后，经列车供电干线(列车电缆、车端连接器)向客车供电的技术条件。 本标准适用于新造国际联运客车。 运用于国内的采用相同供电方式的客车可参照执行。

Technical conditions for train main line power supply

DIN EN 50206-1:1999 轨道交通.车辆.集电器的特征试验.第1部分:干线车辆的集电器

Railway applications - Rolling stock - Pantographs: Characteristic tests - Part 1: Pantographs for main line vehicles; German version EN 50206-1:1998

TB/T 2938-1988 电气化铁道铝包钢绞线

Aluminum clad steel strand for electrified railway

DIN EN 50123-6:1998 轨道交通.固定设备.直流开关装置.第6部分:直流开关装置

Railway applications - Fixed installations; D.C. switchgear - Part 6: Switchgear assemblies; German version EN 50123-6:1998

JIS E 5007:1998 铁路车辆.牵引变压器.试验方法

Railway rolling stock -- Traction transformers -- Test methods

NF F41-020-3:1998 直流开关设备.第3部分:户内直流断路器和开关断路器

D.C. Switchgear. Part 3 : indoor D.C. Disconnectors and switch-disconnectors.

NF F41-020-1:1998 直流开关设备.第1部分:总则

D.C. Switchgear. Part 1 : general.

DIN EN 50123-5:1998 轨道交通.固定设备.直流开关装置.第5部分:直流网络中特殊应用的超电压避雷器和低电压限制器

Railway applications - Fixed installations - D.C. switchgear - Part 5: Surge arresters and low-voltage limiters for specific use in D.C. systems; German version EN 50123-5:1997

TB/T 2885-1998 电气化铁道专用油浸式吸流变压器

Oil-immersed current-absorbing transformer for electrified railway

TB/T 2891-1998 电气化铁道并联电容器静态型高次谐波过流保护技术条件

Technical conditions for static high-order harmonic overcurrent protection of shunt capacitors for electrified railways

TB/T 2890-1998 电气化铁道专用并联电容器技术条件

Specifications for shunt capacitors for electrified railways

TB/T 2888-1998 电气化铁道用2×27.5kV自耦变压器技术条件

Specifications of 2×27.5kV autotransformer for electrified railway

TB/T 2887-1998 铁道专用27.5kV级油浸式电力变压器技术参数和要求

Technical parameters and requirements of 27.5kV oil-immersed power transformer for railway

TB/T 2886-1998 电气化铁道27.5kV、55kV级油浸式斯科特联接变压器技术条件

Technical conditions of 27.5kV and 55kV oil-immersed Scott connection transformers for electrified railways

TB/T 1678-1997 交流电气化铁道通信防护专业术语

Communication protection terminology for AC electrified railway

TB/T 2823-1997 交流电气化铁道对电视差转台的防护距离

The protection distance of AC electrified railway to TV turntable