共找到 306 条与 铁路车辆综合 相关的标准,共 21 页
이 규격은 주행시 여객차 차체에서의 진동 가속도, 진동수 등의 진동 특성 측정 방법에 대하
Vibration characteristics of railway rolling stock-Measuring methods
이 규격은 철도 차량의 고전압 직류 회로에, 단일체 또는 고속도 감류기로 사용되는 철도 차
Railway rolling stock-High speed circuit breaker-Test methods
이 규격은 철도 차량에 사용하는 전자 기기(이하 전자 기기라 한다.)의 시험에 관한 일반
General rules for tests of electronic equipmentused on railway rolling stock
이 규격은 철도 차량의 구조체, 대차 그 밖의(1) 용접 구조에 쓰이는 아크 용접 이음(이
Design Methods of arc welded joints for railway rolling strock
本标准规定了旅客列车DC600V 供电系统及部件的技术要求、检验规则及试验方法等。 本标准适用于电力牵引的DC600V供电制式旅客列车及动力集中动车组。 本标准也 适用于内燃牵引的DC600V供电制式旅客列车及动车组(供电辅助发电机组除外)。 动力分散动车组参照执行本标准。
Technical conditions of DC600V power supply system for passenger trains
This standard applies to all electronic equipment for control, regulation, protection, supply, etc., installed on rail vehicles and associated with: - either the accumulator battery of the vehicle; - or a low voltage power supply source with or without a direct connection to the contact system (transformer, potentiometer device, auxiliary supply); with the exception of electronic power circuits, which conform to EN 50207. This standard covers the conditions of operation, design, construction, and testing of electronic equipment, as well as basic hardware and software requirements considered necessary for competent, reliable equipment. Additional requirements in other standards or individual specifications may complement this standard, if they are justified. Specific requirements related to practices necessary to assure defined levels of functional safety are to be determined in accordance with subclauses 4.6.3.1 and 4.6.3.2 of EN 50126 and its informative annex A. Software safety integrity level of 1 or higher shall only be considered when it is shown that a residual safety risk remains and that it has to be carried by the software driven programmable electronic system. In such a case (i.e. software safety integrity level 1 or higher), EN 50128 is applicable. For the purpose of this standard, electronic equipment is defined as equipment mainly composed of semiconductor devices and recognized associated components. These components will mainly be mounted on printed boards. NOTE Sensors (current, voltage, speed, etc.) and firing unit printed board assemblies for power electronic devices are covered by this standard. Complete firing units are covered by EN 50207.
Railway applications - Electronic equipment used on rolling stock
Railway applications - Communication, signalling and processing systems - Part 2 : safety-related communication in open transmission systems.
The document indicates the terms and definitions of rail vehicles according to their technical characteristics and is intended to facilitate oral and written communication. The document incorporates the English and French translation of the terms for information.
Railway applications - Classification of rail vehicles - Survey, terminology, definitions
Railway applications - Communication, signalling and processing systems - Part 1 : safety-related communication in closed transmission systems.
Railway applications - Communications, signalling and processing systems - Software for railway control and protection systems.
Railway applications - Structural requirements of railway vehicle bodies.
이 규격은 운행하는 차량 승객의 승차감 측정 및 평가 방법에 대하여 규정한다. 이 규격의
Railway rolling stock-Test and evaluation method for passenger comfort
이 규격은 철도 차량(최고 속도 150km/h 이하)에 사용되는 차축과 고탄소강 일체 압연
Railway rolling stock - Assembly and test methods of wheelsets
이 규격은 철도 차량에 사용하는 자동 복합 연결기(이하 복합 연결기라 한다.)에 대하여 규
Automatic complex coupler for railway rolling stock
이 규격은 철도 차량의 주행 저항을 측정하기 위한 주행 저항 시험에 대하여 규정한다.
Railway rolling stock-Test methods for running resistance
This European Standard defines minimum structural requirements for railway vehicle bodies. This European Standard specifies the loads vehicle bodies shall be capable of sustaining, identifies how material data shall be used and presents the principles to be used for design verification by analysis and testing. The railway vehicles are divided into categories which are defined only with respect to the structural requirements of the vehicle bodies. These structural requirements should not be confused with operating requirements. It is the responsibility of the operator to decide as to which structural category railway vehicles shall be designed. Some vehicles may not fit into any of the defined categories; the structural requirements for such railway vehicles should be specified by the operator using the principles presented in this European Standard. The standard applies to all railway vehicles within the EU and EFTA territories. The specified requirements assume operating conditions and circumstances such as are prevalent in these countries.
Railway applications - Structural requirements of railway vehicle bodies
Railway applications - Rolling stock - Pantographs : characteristics and tests - Part 2 : pantographs for metro and light rail vehicles.
本标准规定了车辆滚动轴承车轴轮座前肩弧度A型样板的结构型式和基本尺寸。 本标准适用于检查经过精加工后的车辆滚动轴承车轴A型轮座前肩弧度样板的设计。
Vehicle axle wheel seat radian sample
本标准规定了车辆滑动轴承车轴轮座前肩、轴颈后肩弧度样板的结构型式和基本尺寸。 本标准适用于检查经过精加工后的车辆滑动轴承车辆(轴型:B,C,D,E,F,G)轮座前肩和轴颈后肩弧度样板的设计。
Radian sample of the front shoulder of the vehicle rolling bearing axle wheel seat and the rear shoulder of the journal
本标准规定了车辆滚动轴承车轴轮座前肩弧度B、C型样板的结构型式和基本尺寸。 本标准适用于检查经过精加工后的车辆滚动轴承车轴B型和C型轮座前肩弧度样板的设计。
Front shoulder radian B and C type samples of vehicle rolling bearing axle and wheel seat
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号