T04 基础标准与通用方法 标准查询与下载

SAE J2506-2012 材料处理器命名和规范

This SAE Standard establishes terminology and the content of commercial literature specifications for self-propelled crawler and wheeled material handlers, pedestal mounted material handlers and their equipment as defined in 3.1. Illustrations used here are not intended to include all existing commercial machines or to be exactly descriptive of any particular machine. They have been provided to describe the principles to be used in applying this document. (Material handlers share many design characteristics with hydraulic excavators and log loaders; primarily 360 degree continuous reotation of the upperstructure relative to the undercarriage or mounting. They differ in their operating application. Material handlers are used for the handling of scrap material and normally utilize grapples or magnets. Hydraulic excavators are used for the excavation of earth, gravel and other loose material utilizing a bucket. Log loaders are used for the handling of logs and trees and normally utilize grapplers.) The purpose of this document is to establish a uniform method of providing nomenclature for material handlers.

Material Handler Nomenclature and Specifications

KS R 0121-2012 道路车辆.混合动力汽车术语

이 표준은 차량과 구별되는 하이브리드 자동차 시스템, 구동 장치, 에너지 저장 장치, 성능

Road vehicles－Glossary of terms relating to hybrid vehicles

KS R 0132-2012 道路车辆.电动摩托车术语

이 표준은 전기 모터사이클의 시스템, 구동 장치, 에너지 저장 장치, 성능 등에 관한 용어

Road vehicles－Glossary of terms relation to electric two-wheeled motorcycles

KS R 1171-2012 制动装置的坡道出发辅助技能评估方法

이 표준은 승용 자동차용(RV, SUV 자동차를 포함한다.)에 사용하는 전자적으로 제어되는

Test method for automotive hill start assist function of brake system

KS R 1172-2012 客车.车道偏离警告系统.道路环境条件试验方法

이 표준은 승용차에 사용하는 차선이탈 경고장치의 성능 시험을 수행하기 위하여 도로의 곡률과

Test method of lane departure warning system for passenger car－Road and ambient test conditions and test method

SAE J2489-2012 SAE No. 2 摩擦试验机耐久性试验

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This SAE Recommended Practice is intended as the definition of a standard test, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. The SAE No 2 Friction Test Machine is used to evaluate the friction characteristics of automatic transmission plate clutches with automotive transmission fluids. It can also be used to conduct durability tests on wet friction systems. The specific purpose of this document is to define a Durability Test based on a specific power level selected from either the 3600 r/min Stepped Power Test or from the 6000 r/min Stepped Power Test, for the evaluation of wet friction system performance variation as a function of number of cycles. This standard procedure is intended for common use by both suppliers and end users to allow objective comparisons of wet friction material system performance. The only variables selected by the supplier or user of the friction system are: a. Friction Material; b. Fluid; and c. Reaction Plates. These three variables must be clearly identified when reporting the results of this test. If any of the test parameters or system hardware as described in this document are changed, other than the friction material, test fluid, or reaction plates, the data may not be reported as having been obtained using this document. This procedure is not intended to evaluate the initial coefficient or break-in characteristics. For this information, refer to SAE J2490 SAE No. 2 Friction Test Machine µPVT Test.

SAE No. 2 Friction Test Machine Durability Test

SAE J1098-2012 每小时应用吨公里

This SAE Standard establishes the procedures for the application of Tonne Kilometer Per Hour (TKPH) rating values for off-the-road tires; utilizing empirical data formula, it describes the procedure for evaluating and predicting off-the-road tire TKPH requirements as determined by a work cycle analysis. The loads, speeds, inflations, and rim configurations are assumed to be within acceptable industry or manufacturer's prescribed recommendations. Other application parameters affecting tires are not included in the scope (for example: floating, cut, bruise, wear, etc.). These parameters must also be considered for final tire selection, since a tire that maximizes desirable TKPH characteristics will sometimes compromise these other parameters. The standards for the productivity of off-the-road machines to tires are not included in the scope. The formula (4.2 and 4.3) are applicable to transport type machines only (that is, trucks, tractor trailers, and scrapers) using category E earthmover Service Code Tires. See SAE J751 for service codes.

Ton Kilometer Per Hour Application

CJ/T 387-2012 城市轨道交通设备房标识

本标准规定了城市轨道交通设备房标识分类、要求和标识设计。本标准适用于城市轨道交通车站、区间、控制中心和车辆基地(车辆段、停车场)等设备房及有关设备的标识的设计和制作等。

Equipment room signs of urban rail transit

BS ISO 8855:2011 道路车辆.车辆动力学和道路保持能力.词汇

Road vehicles. Vehicle dynamics and road-holding ability. Vocabulary

BS ISO 11452-4:2011 道路车辆.来自窄辐电磁能的电气干扰的组件试验方法.捆束激励法

Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Harness excitation methods

KS R 0012-2012 汽车术语.第2部分:汽车尺寸、重量、载重及性能

이 표준은 자동차의 치수, 질량, 하중 및 성능에 관한 용어(이하 용어라 한다.)와 그 정

Glossary of terms relating to automobiles－Part 2：Dimensions, masses, weights and performances of automobiles

KS R 0041-2012 长期污染防治设备

이 표준은 공해 방지 장치의 용어에 관하여 규정한다.

Glossary of terms for pollution control equipment

KS R 0011-2012 汽车术语.第1部分:汽车分类

이 표준은 자동차 등의 종류에 관한 용어(이하 용어라 한다.)와 그 정의에 대하여 규정한다

Gossary of terms relating to kinds of automobiles－Part 1：Kinds of automobiles

KS R 0024-2012 汽车制动术语.种类、制动设备和制动

이 표준은 자동차에 사용하는 브레이크의 종류, 역학 및 작동에 관한 용어에 대하여 규정한다

Glossary of terms relating to brake types, braking mechanics and brake operation of automobiles

ASTM F2812-12 选定的汽车运动的护目镜和眼镜型防护眼镜的标准规范

1.1 This specification covers eye protectors, exclusive of helmet-mounted visors, designed for use by riders of motorcycles, mopeds, and snowmobiles for off road use that minimize or significantly reduce injury to the eye and adnexa as a result of impact and penetration by objects that may be kicked up from the road, track, trail, or snow surfaces and made airborne and, as such, likely to cause eye discomfort or injury. This specification does not address shield-type eye protectors such as are connected to, integral to, and/or supported by protective helmets. Protective eyewear offers protection only to the eyes and does not protect other parts of the head, face, or neck. 1.2 Protectors are divided into two types, goggles or spectacles, depending on their design characteristics. 1.3 This specification does not apply to prescription eyewear. (Warning???Impact-resistant prescription spectacles that conform to the standard specifications of ANSI Z87.1 should be used if spectacles are to be worn under goggle-type eyewear as covered by this specification.) 1.4 In this specification, the use of the word ???shall??? indicates a mandatory requirement. The word ???should??? indicates a recommendation. 1.5 Units???The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. Metric units of measure in this specification are in accordance with the International System of Units (SI). If a value for measurement as given in this specification is followed by an equivalent value in other units, the first stated is to be regarded as the requirement. A given equivalent value may be approximate. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports

BS ISO 26262-3:2011 道路车辆.功能安全.概念阶段

Road vehicles. Functional safety. Concept phase

QC/T 894-2011 重型混合动力电动汽车污染物排放车载测量方法

本标准规定了混合动力电动汽车在底盘测功机或场地上进行车载排放试验的试验方法。 本标准适用于最大总质量超过3500kg的混合动力电动汽车。

On-board measurement methods for emissions from heavy-duty hybrid electric vehicles

ISO 8855:2011 道路车辆 车辆动力学和道路保持能力 词汇

Road vehicles - Vehicle dynamics and road-holding ability - Vocabulary

BS ISO 26262-6:2011 道路车辆.功能安全.在软件级的产品开发

Road vehicles. Functional safety. Product development at the software level

BS ISO 26262-5:2011 道路车辆.功能安全.在硬件级的产品研发

Road vehicles. Functional safety. Product development at the hardware level