T35 车用电子、电气设备与仪表综合 标准查询与下载

ISO 6856:2005 道路车辆.非屏蔽高电压点火电缆组件.试验方法和一般要求

This International Standard specifies test methods and general requirements for unscreened high-voltage ignition cable assemblies, and is applicable to all such assemblies used in road vehicle applications.

Road vehicles - Unscreened high-voltage ignition cable assemblies - Test methods and general requirements

KS R ISO 4182:2004 汽车.前照灯光束角度随载荷变化的测量

이 규격은 하중에 의한 차량 자세의 변화로 차량 전조등의 강하 빔 경사각 변화를 초기 경사

Road vehicles-Measurement of variations in dipped-beamheadlamp angle as a function of load

KS R ISO 3559:2004 道路车辆.装在汽车及其挂车上的照明灯工作电压

이 규격은 자동차와 그 자동차의 트레일러에 장착하는 조명 및 조명 신호 장치와 트레일러 연

Road vehicles-Working voltages for lights fitted to motorvehicles and to their trailers

KS R ISO 4148:2004 道路车辆.专用警告信号灯.尺寸

이 규격은 투사 빔의 수직면에 들어가는 장치 등에서 광도가 빠르게 변하는 것을 염두에 두고

Road vehicles-Special warning lamps-Dimensions

KS R ISO 303:2004 道路车辆.汽车及其挂车的照明和光信号装置的安装

이 규격은 철도 차량, 농업 또는 산림용 트랙터 및 기계 장치, 공공 작업 차량을 제외한

Road vehicles-Installation of lighting and light signalling devicesfor motor vehicles and their trailers

KS R ISO 4082:2004 道路车辆.汽车.闪光装置

이 규격은 자동차용 점멸 장치의 인증에 필요한 전기적 특성에 대해 정의한다.

Road vehicles－Motor vehicles－Flasher units

KS R ISO 3208:2004 道路车辆.轿车内隆起部位的测定

이 규격은 승용차 내부에 설치된 제어용 장치 및 그 밖의 장치의 돌출부의 중요성과 힘의 작

Road vehicles－Evaluation of protrusions inside passenger cars

KS R ISO 4165:2004 道路车辆.电气连接装置.双极连接

이 규격은 도로 차량의 추가 설비에 공칭 전압 12 V 또는 24 V의 전원을 공급하기

Road vehicles－Electrical connections－Double-pole connection

KS R ISO 4141-4:2004 道路车辆.多芯连接电缆.第4部分:装芯电缆组件联接试验方法和要求

이 규격에서는 견인 및 피견인 차량의 연결에 사용되는 공칭 전압 12 V 또는 24 V

Road vehicles-Multi-core connecting cables-Part 4:Articulation test method and requirements for coiled cable assemblies

KS R ISO 4091:2004 道路车辆.牵引车和挂车之间电气连接用连接器.定义、试验和要求

이 규격은 견인, 피견인 차량의 전기적 연결에 대한 커넥터의 정의와 시험, 요구 사항을

Road vehicles－Connectors for the electrical connection of towing and towed vehicles－Definitions, tests and requirements

KS R ISO 3732:2004 道路车辆.牵引车和挂车之间电气连接用连接器.带12V标称电源电压的车辆用12S(补充)型7极连接器

이 규격은 12V용 7폴 보조 커넥터(12S)에 대한 치수 특성 및 구체적인 요구 사항

Road vehicles－Connectors for the electrical connection of towing and towed vehicles－7 pole connector type 12S(supplementary)for vehicles with 12V nominal supply voltage

KS R ISO 3731:2004 道路车辆.牵引车和挂车之间电气连接用连接器.带24V标称电源电压的车辆用24S(补充)型7极连接器

이 규격은 24V용 7폴 보조 커넥터(24S)에 대한 치수 특성 및 구체적인 요구 사항

Road vehicles－Connectors for the electrical connection of towing and towed vehicles－7 pole connector type 24S(supplementary)for vehicles with 24V nominal supply voltage

ISO 11452-2:2004 道路车辆.窄带辐射的电磁能量产生的电干扰的部件试验方法.第2部分:吸波屏蔽外壳

This part of ISO 11452 specifies an absorber-lined shielded enclosure method for testing the immunity (off-vehicle radiation source) of electronic components for passenger cars and commercial vehicles regardless of the propulsion system (e.g spark-ignition engine, diesel engine, electric motor). The device under test (DUT), together with the wiring harness (prototype or standard test harness), is subjected to an electromagnetic disturbance generated inside an absorber-lined shielded enclosure, with peripheral devices either inside or outside the enclosure. It is applicable only to disturbances from continuous narrowband electromagnetic fields. See ISO 11452-1 for general test conditions.

Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure

SAE USCAR20-2004 电场相关的寿命试验.SAE/USCAR 2补充件

This life test for underhood/passenger/trunk connector systems may be used in place of Section 5.8.6 (Connector System Electrical Test Flow Chart) of SAE/USCAR-2. All other requirements of SAE/USCAR-2 remain applicable even when this test is used. Refer to SAE/USCAR-2 and Connector/Terminal Supplier for appropriate power rating and current cycle Testing.

Field correlated life test - Supplement to SAE/USCAR 2

DIN EN ISO 4165:2004 道路车辆.电气连接.双极连接

The following items are covered: Dimensions, tests, requirements.

Road vehicles - Electrical connections - Double-pole connection (ISO 4165:2001); German version EN ISO 4165:2003

ARMY MIL-PRF-52470 A VALID NOTICE 1-2004 91厘米(36英寸)直径的孔.18米(60英尺)最大深度(十进制)车载接地俄歇

MIL-PRF-52470A, dated 8 March 1996, has been reviewed and determined to be valid for use in acquisition

AUGER, EARTH, TRUCK-MOUNTED, 91 CENTIMETER (36 INCH) DIAMETER HOLE, 18 METER (60 FOOT) MAX DEPTH (METRIC)

KS R 5018-2003 道路车辆.照明灯和光信号装置

이 규격은 자동차에 사용하는 주된 램프류(리플렉스 리플렉터를 포함한다.)에 대하여 규정

Automobiles parts-Lighting and light signalling devices

KS R ISO 3784:2003 道路车辆.碰撞试验中冲击速度的测量

이 규격에서는 도로 차량에 대한 충돌 시험에서 충격 속도 측정의 정확도를 규정하고 있다

Road vehicles-Measurement of impact velocity in collision tests

ISO 11452-7:2003 道路车辆.窄带辐射的电磁能量产生的电干扰的部件试验方法.第7部分:直流射频(RF)能注入

This part of ISO 11452 specifies a direct RF power injection test for determining the immunity of electronic components of passenger cars and commercial vehicles to electrical disturbances from narrowband electromagnetic energy, regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor). The test method, which involves providing differential mode excitation to the DUT (device under test), is applicable to all DUT leads except RF Ground. Applicable over the frequency range 0,25 MHz to 500 MHz, the method can be used to predict the compatibility in the vehicle environment with respect to radiated and conducted RF energy, including conducted transient RF energy, and is especially useful as a means of isolating the susceptible circuits within a DUT and evaluating potential solutions.

Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection

KS R IEC 60254-2:2003 铅酸牵引蓄电池.第2部分:单元格和端子的种类与标识

이 규격은 전기로 움직이는 모든 개체의 전력원으로 사용되는 납산 축전지의 응용 부분에

Lead-acid traction batteries－Part 2：Dimensions of cellsand terminals and marking of polarity on cells