T36 电子、电气设备 标准查询与下载

ISO 10924-4:2009 道路车辆.断路器.第4部分:CB15式带有标签的中等断路器(刀片式)

Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15

ISO 10924-1:2009 道路车辆.断路器.第1部分:术语及一般试验要求

Road vehicles - Circuit breakers - Part 1: Definitions and general test requirements

QC/T 810-2009 汽车起动机用电磁开关技术条件

本标准规定了汽车起动机用电磁开关的要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于汽车起动机用电磁开关。

Solenoid switch for automobile starters specification

HJ 509-2009 车用陶瓷催化转化器中铂、钯、铑的测定.电感耦合等离子体发射光谱法和电感耦合等离子体质谱法

本标准规定了机动车用陶瓷催化转化器中铂（Pt）、钯(Pd)、铑(Rh)的电感耦合等离子体发射光谱(ICP-OES)和电感耦合等离子体质谱(ICP-MS)的测定方法。 本标准适用于新制的和使用过的以堇青石蜂窝陶瓷为载体，并附载贵金属作活性组分的催化转化器中Pt、Pd、Rh的测定。

Determination of Platinum,Palladium and Rhodium loading in the vehicle-used ceramic catalytic converters.Inductive coupled plasma-optical emission spectrometry and inductive coupled plasma-mass spectrometry

JIS D 5403 ERRATUM 1:2009 勘误表

ERRATUM

ISO 6469-1:2009 道路电气车辆.安全规范.第1部分:车载可充电储能系统(RESS)

This part of 1SO 6469 specifies requirements for the on-board rechargeable energy storage systems (RESS) of electrically propelled road vehicles, inciuding battery-electric vehicles (BEVs), fuel-cell vehicles (FCVs) and hybrid electric vehicles (HEVsj, for the protection of persons inside and outside the vehicle and the vehicle environment. Flywheels are not included in the scope of this part of 1SO 6469. This part of ISO 6469 does not apply to RESS in motorcycles and vehicles_ not primarlly intended as road vehicles, Such as material handling trucks or fork-lift trucKs， This part of ISO 6469 applies only to RESS in on-board voltage class B (see 3.18) electric circuits for vehicie propulsion. This part of 1SO 6469 does not provide comprehensive safety information for manufacturing, maintenance and repalr personnel.

Electrically propelled road vehicles - Safety specifications - Part 1: On-board rechargeable energy storage system (RESS)

BS ISO 20860-2:2009 道路车辆.50 Ω阻抗无线电频率连接系统接口.测试程序

Road vehicles - 50 ohms impedance radio frequency connection system interface - Test procedures

SANS 55504:2009 公共交通.道路车辆.车内可以看到的可变的乘客信息显示装置

Outlines the requirements for electronic Interior Variable Message Signs (IVMS) for the presentation of dynamic passenger information in public transport vehicles. Applies to different IVMS systems mounted in public transport vehicles and specifies the

Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle

JJG 517-2009 出租汽车计价器检定规程

本规程适用于出租汽车计价器(以下简称计价器)的型式评价、首次检定、后续检定和使用中检验。

Verification Regulation of Taximeters

SAE USCAR12-2009 布线元件设计指南

Wiring component design guidelines

SAE J2030-2009 重型电连接器的性能标准

This SAE Standard encompasses connectors between two cables or between a cable and an electrical component and focuses on the connectors external to the electrical component. This document provides performance requirements based upon the mechanical and electrical environment and covers applications of connectors for direct current electrical systems of 50 V or less in heavy- duty applications typically used in off-highway machinery. Severe applications may require higher test levels, or field-testing on the intended application.

Heavy-Duty Electrical Connector Performance Standard

SAE J746-2009 液压发动机试验规程

This test code describes tests for determining characteristics of hydraulic positive displacement motors as used on construction and industrial machinery as referenced in SAE J1116. These characteristics are to be recorded on data sheets similar to the one shown in Figure 1. Two sets of data sheets are to be submitted: one at 49 °C (120 °F) and one at 82 °C (180 °F). This test code establishes conditions for motor tests, outlines a procedure for tests, and establishes a method of presenting motor test data. The procedures covers the following determinations: a, SAE Volumetric rating; b. SAE running torque characteristics; c. SAE stall torque characteristics; d. Power output; e. Power loss; f. Torque efficiency; g. Overall efficiency

Hydraulic Motor Test Procedures

ISO 22900-3:2009 道路车辆.模块化车辆通信接口(MVCI).第3部分:诊断服务器应用程序接口(D-Server API)

Road vehicles - Modular vehicle communication interface (MVCI) - Part 3: Diagnostic server application programming interface (D-Server API)

BS ISO 11452-10:2009 道路车辆.窄频辐射电磁能引发的电气干扰元件试验方法.在音频扩展范围内的抗传导干扰性

Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Immunity to conducted disturbances in the extended audio frequency range

SAE J1843-2009 中型和重型车辆应用中采用电子控制的油门踏板位置传感器

The purpose of this SAE Recommended Practice is to provide a common electrical and mechanical interface specification that can be used to design electronic accelerator pedal position sensors and electronic control systems for use in medium- and heavy-duty vehicle applications.

Accelerator Pedal Position Sensor for Use with Electronic controls in medium- and Heavy-Duty Vehicle Applications

DIN 72594-2:2009 道路车辆.50 ohm无线电频率接口(50RFI).第2部分:试验规程

Road vehicles - 50 ohm radio frequency interface (50 RFI) - Part 2: Test procedures

JIS D 1401:2009 混合电车用双层电容器的电气特性试验方法

This Standard specifies the test methods for electrical characterisities of a unit cell of electric double layer capacitor (hereafter refereed to as"capacitor") used in peak-power assistance for hybrid electric vehicles.

Electrical characteristic test methods of electric double layer capacitors for use in hybrid electric vehicles

SAE J1211-2009 汽车电气/电子模块耐用性鉴定用手册

This document addresses robustness of electrical/electronic modules for use in automotive applications. Where practical, methods of extrinsic reliability detection and prevention will also be addressed. This document primarily deals with electrical/electronic modules (EEMs), but can easily be adapted for use on mechatronics, sensors, actuators and switches. EEM qualification is the main scope of this document. Other procedures addressing random failures are specifically addressed in the CPI (Component Process Interaction) section 10. This document is to be used within the context of the Zero Defect concept for component manufacturing and product use. It is recommended that the robustness of semiconductor devices and other components used in the EEM be assured using SAE J1879 OCT2007, Handbook for Robustness Validation of Semiconductor Devices in Automotive Applications. The emphasis of this document is on hardware and manufacturing failure mechanisms, however, other contemporary issues as shown in Figure 1 need to be addressed for a thorough Robustness Validation. A Pareto of contemporary issues is shown in Figure 1. Although this document addresses many of the issues shown, however some are outside the scope of this document and will need to be addressed for a thorough RV process application. Examples of issues outside the scope of this document are system interactions, interfaces, functionality, HMI (Human-Machine Interface) and software. At the time of publication of this handbook, a system level Robustness Validation handbook, which addresses these issues, had been initiated.

Handbook for Robustness Validation of Automotive Electrical/Electronic Modules

ISO 11452-10:2009 道路车辆.窄带辐射电磁能产生的电气干扰用部件试验方法.第10部分:扩展音频频率范围中的抗扰性

Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range

BS ISO 22900-2:2009 道路车辆.模块车辆通信接口(MVCI).诊断协议数据单元应用程序设计接口(D-PDU API)

Road vehicles - Modular vehicle communication interface (MVCI) - Diagnostic protocol data unit application programming interface (D-PDU API)