T36 电子、电气设备 标准查询与下载

BS ISO 8820-5:2007 道路车辆.熔断体.SF 30和SF 51类型的带轴向引线的熔断体(带状熔断体)和试验装置

This part of ISO 8820 specifies fuse-links with axial terminals (Strip fuse-links) Type SF 30 and SF 51 and test fixtures for fuses in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 32 V, a current rating of 30 A to 500 A and a breaking capacity of 2 000 A intended for use in the electrical system of road vehicles with a nominal voltage of 12 V and/or 24 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1, whose requirements are applicable, except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Fuse-links with axial terminals (strip fuse-links) types SF 30 and SF 51 and test fixtures

BS ISO 8820-6:2007 道路车辆.熔断体.单螺栓熔断体

This part of ISO 8820 specifies single-bolt fuse-links in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 58 V, a current rating of u 300 A and a breaking capacity of 2 000 A intended for use in road vehicles at a nominal voltage of 12 V, 24 V and/or 42 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1, whose requirements are applicable, except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Single-bolt fuse-links

BS ISO 8820-7:2007 道路车辆.熔断体.:额定电压为450V带焊片(G型)的熔断体

This part of ISO 8820 specifies fuse-links with tabs (Type G) in road vehicles. This type of fuse-link is basically designed for use in fuel-cell applications. This part of ISO 8820 establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This part of ISO 8820 is applicable for fuse-links with a rated voltage of 450 V, a current rating of u 70 A and a breaking capacity of 2 000 A intended for use in road vehicles at a nominal voltage up to 450 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1:—1) and ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1:—1), the requirements of which are applicable except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Fuse-links with tabs (Type G) with rated voltage of 450 V

BS ISO 16750-1:2007 道路车辆.电气和电气设备环境条件和试验.总则

This part of ISO 16750 applies to electric and electronic systems/components for vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle. This part of ISO 16750 contains definitions and general notes. Electromagnetic compatibility (EMC) is not covered by this part of ISO 16750.

Road vehicles - Environmental conditions and testing for electrical and electronic equipment - General

SAE J1757-1-2007 机动车辆显示器的标准度量衡

The scope of this SAE Standard is to provide methods to determine display optical performance in all typical automotive ambient light illumination - with focus on High Ambient Contrast Ratio, which is critical for display legibility in a sunshine environment. It covers indoor measurements and simulated outdoor lighting. It is not the scope of this document to set threshold values for automotive compliance, however some recommended values are presented for reference.

Standard Metrology for Vehicular Displays

ISO 8820-7:2007 道路车辆.熔断器.第7部分:额定电压为450V带焊片(G型)的熔断器

This part of ISO 8820 specifies fuse-links with tabs (Type G) in road vehicles. This type of fuse-link is basically designed for use in fuel-cell applications. This part of ISO 8820 establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This part of ISO 8820 is applicable for fuse-links with a rated voltage of 450 V, a current rating of u 70 A and a breaking capacity of 2 000 A intended for use in road vehicles at a nominal voltage up to 450 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1:—1) and ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1:—1), the requirements of which are applicable except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Part 7: Fuse-links with tabs (Type G) with rated voltage of 450 V

IEC 60364-7-721:2007 低压电气装置.第7-721部分:特殊装置或位置的要求.居住挂车和电动居住挂车的电气装置

The particular requirements of this part of IEC 60364 apply to the electrical installation of caravans and motor caravans. They apply to those electrical circuits and equipment intended for the use of the caravan for habitation purposes. They do not apply to those electrical circuits and equipment for automotive purposes. They do not apply to the electrical installations of mobile homes, residential park homes and transportable units. NOTE 1 For mobile homes and residential park homes the general requirements apply. NOTE 2 For transportable units see IEC 60364-7-717. NOTE 3 For the purpose of this standard, caravans and motor caravans are referred to as “caravans” The particular requirements of some parts from the IEC 60364-7 series may also apply to such installations in caravans, e.g. IEC 60364-7-701.

Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans

JASO Z123-2007 汽车部件.空调.制冷剂(R134a)泄漏用试验方法

Automotive parts-Air conditioner-Test method for measuring refrigerant (R134a)leakage

JB/T 6698-2007 机动车及内燃机用永磁发电机 安装尺寸

本标准规定了机动车及内燃机用永磁发电机的安装尺寸。 本标准适用于安装在机动车及内燃机用的飞轮式、带轮式及风扇式永磁发电机的安装尺寸。船舶及其他特殊用途永磁发电机的安装尺寸可参照采用。

Installation dimensions of permanent magnetic generators applied for motor vehicles and internal-combustion engine

JB/T 6707-2006 机动车及内燃机用起动机 技术条件

本标准规定了机动车及内燃机用起动机的技术要求、试验方法、检验规则、标志、包装、贮存和保管。 本标准适用于机动车（汽车、拖拉机、工程机械、低速载货汽车、三轮汽车）及内燃机用起动机，船舶及其他类似机械也可参照使用。

Specifications of starters applied for motor vehicles and internal-combustion engine

JEITA TT-6004-2007 智能交通系统(ITS)车载器用语音合成符号

Speech synthesizer symbols for ITS on -Bodrd Unit

ISO 8820-6:2007 道路车辆.熔断器.第6部分:单螺栓连接熔断器

This part of ISO 8820 specifies single-bolt fuse-links in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 58 V, a current rating of u 300 A and a breaking capacity of 2 000 A intended for use in road vehicles at a nominal voltage of 12 V, 24 V and/or 42 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1, whose requirements are applicable, except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links

ISO 8820-5:2007 道路车辆.熔断器.第5部分:SF 30和SF 51类型的带轴向引线的熔断器(带状熔断器)和试验装置

This part of ISO 8820 specifies fuse-links with axial terminals (Strip fuse-links) Type SF 30 and SF 51 and test fixtures for fuses in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 32 V, a current rating of 30 A to 500 A and a breaking capacity of 2 000 A intended for use in the electrical system of road vehicles with a nominal voltage of 12 V and/or 24 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1, whose requirements are applicable, except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

DIN EN ISO 15006:2007 道路车辆.交通信息和控制设备的人类工效学问题.车辆中声音信号表示规范和附加规程

This International Standard establishes ergonomic specifications for the presentation of auditory information related to transport information and control systems (TICS) through speech or sounds. It applies only to the use of auditory displays when the vehicle is in motion. It presents a set of requirements and recommendations for in-vehicle auditory messages from TICS, and provides message characteristics and functional factors for maximizing message intelligibility and utility while helping prevent auditory or mental overload.

Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and compliance procedures for in-vehicle auditory presentation (ISO 15006:2004); English version of DIN EN ISO 15006:2007-02

ASTM E2493-07 收集取证交通工具电子控制装置中非易失性存储数据的标准指南

This guide sets forth recommendations for the collection of non-volatile memory data from a vehicle ECU or EDR that, to the extent possible, do not alter the data being collected. This guide sets forth recommendations for the collection of non-volatile memory data from a vehicle ECU or EDR that, in the case where data may be altered during the collection process, informs the parties involved of the risk and type of alteration that may occur. 1.1 This guide sets forth recommendations for the collection of non-volatile memory data from vehicle Electronic Control Units (ECUs), or Event Data Recorders (EDRs), that have allegedly been involved in an event or incident that is the subject of litigation.1.2 The data collection methods used to retrieve data from the subject ECU or EDR include commercially available scan/interrogation/test tools and also include proprietary scan/interrogation/test tools with prior agreement of the parties involved. 1.3 Additional, and potentially applicable, standards promulgated by ASTM Committee E-30 on Forensic Sciences include: Practices E 860 and E 1188.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units

KS R ISO 15031-4:2006 道路车辆.排放相关的诊断用车辆和外部设备之间的通信.第4部分:外部试验设备

규격은 다음 사항에 대하여 규정한다.-OBD가 탑재된 차량과 외부 시험 장치 사이의 통

Road vehicles-Communication between vehicle and external equipment for emissions-related diagnostics-Part 4:External test equipment

KS R ISO 15031-3:2006 道路车辆.排放相关的诊断用车辆和外部设备之间的通信.第3部分:诊断连接器和相关电路的规范及使用

이 규격은 배출가스 관련 진단을 위한 외부 장비와 차량 사이의 통신에 사용하는 진단 커넥터

Road vehicles－Communication between vehicle and external equipment for emissions－related diagnostics－Part 3：Diagnostic connector and related electrical circuits, specification and use

QC/T 774-2006 汽车交流发电机用电子电压调节器技术条件

本标准规定了汽车交流发电机用电子电压调节器的要求、试验方法、检验规则、标志、包装、储存和保管。 本标准适用于汽车交流发电机用电子电压调节器。拖拉机、内燃机、工程机械及其他特殊用途的交流发电机调节器可参照使用。

Technical specification for electronic voltage regulator for automotive alternator

GJB 1249A-2006 装甲车辆通信系统通用规范

本规范规定了装甲车辆通信系统的基本技术要求和质量保证规定等内容。 本规范适用于适用装甲车辆通信设备的选型及通信系统的设计、制造与验收。

General specification for communication system of armoured vehicl

NF R13-440-2*NF EN ISO 8092-2:2006 道路车辆.车载电气布线线束的连接.第2部分:定义、试验方法和通用性能要求

Road vehicles - Connections for on-board electrical wiring harnesses - Part 2 : definition, test methods and general performance requirements.