T36 电子、电气设备 标准查询与下载

BS EN ISO 8092-2:2006 道路车辆.车载电气线束用连接器.定义、试验方法和一般性能要求

This part of ISO 8092 defines terms, and specifies test methods and general performance requirements for single-pole and multi-pole connections used with on-board electrical wiring harnesses of road vehicles. This part of ISO 8092 is applicable to connectors designed to be disconnected after mounting in the vehicle for repair and maintenance only. It does not cover one-part connections, i.e. where one part of the connection has direct contact to the pattern of the printed circuit board. This part of ISO 8092 is not applicable to internal connections of electronic devices.

Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements

BS ISO 17356-3:2006 道路车辆.嵌入式机动车装置用开放式界面.OSEK/VDX操作系统(OS)

OSEK/VDX is a joint project of the automotive industry. It aims at an industry standard for an open-ended architecture for distributed control units in vehicles. This part of ISO 17356 describes the concept of a real-time operating system, capable of multitasking, which can be used for motor vehicles. It is not a product description which relates to a specific implementation. It also specifies the operating system Application Program Interface (API). General conventions, explanations of terms and abbreviations have been compiled in ISO 17356-1. ISO 17356-6 describes implementation and system generation aspects. The specification of the OS represents a uniform environment which supports efficient utilization of resources for automotive control unit application software. The OS is a single processor operating system meant for distributed embedded control units.

Road vehicles - Open interface for embedded automotive applications - OSEK/VDX operating system (OS)

BS ISO 17356-4:2006 道路车辆.嵌入式机动车装置用开放式界面.OSEK/VDX通信(COM)

This part of ISO 17356-4 (COM) specifies a uniform communication environment for automatic control unit application software. It increases the portability of application software modules by defining common software communication interfaces and behaviours for internal communication (communication within an ECU) and external communication (communication between networked vehicle nodes), which is independent of the used communication protocol.

Road vehicles - Open interface for embedded automotive applications - OSEK/VDX Communication (COM)

BS ISO 4141-1:2006 道路车辆.多芯连接电缆.基本性能铠装电缆的试验方法和要求

This part of ISO 4141 specifies the test methods and requirements of basic performance multi-core sheathed cables for the connection of towing and towed vehicles, suitable for a temperature range of -40 ℃ to +85 ℃.

Road vehicles - Multi-core connecting cables - Test methods and requirements for basic performance sheathed cables

SAE J2669-2006 车式发电机用电压调节器

This SAE Definition Document contains historic voltage regulation methods and test requirements that have not been previously published. The purpose of this document is to recommend a set of definitions and practices for use on current future 12 V vehicle electric power regulation and control systems in internal combustion engine road vehicles. This document is not intended to include nor exclude regulators used in higher voltage vehicle electrical systems. The term "generator" rather than "alternator" will be used even though these terms may be used interchangeably in practice. This recommended practice has been developed to reduce the worldwide variation in regulation methods used on automotive generator systems

Voltage Regulators for Automotive-Type Generators

ISO 17356-6:2006 道路车辆.嵌入式机动车装置用开放式界面.第5部分:OSEK/VDX执行语言(OIL)

This document describes the OSEK Implementation Language (OIL) concept for the description for ISO 17356 real-time systems, capable of multitasking and communications, which can be used for motor vehicles. It is not a product description that relates to a specific implementation. General conventions, explanations of terms and abbreviations are compiled in a glossary, which is part of ISO 17356-1.

Road vehicles - Open interface for embedded automotive applications - Part 6: OSEK/VDX Implementation Language (OIL)

KS R ISO 10487-1:2005 乘用车收音机连接.第1部分:尺寸及通用要求

이 규격은 승용차에 부착하기 위하여 의도된 라디오에 대한 다극 커넥터와 안테나 소켓 위치의

Passenger car radio connections-Part 1:Dimensions and general requirements

KS R ISO 10487-2:2005 乘用车.车用收音机连接.第2部分:性能要求

이 규격은 KS R ISO 10487-1에 따른 다극 커넥터의 성능 요구 사항을 규정한 것

Passenger cars-Connections for car radios-Part 2:Performance requirements

KS R ISO 7736:2005 道路车辆.前端安装的轿车无线电接收机.包括连接装置的装配空间

이 규격은 차량 라디오 및 전기적 연결부 등을 차량 전방에 장착할 때 장착 공간에 대한 치

Road vehicles-Car radio for front installation-Installation space including connections

SAE J2740-2005 一般发动机UART连续数据通信

This Technical Information Report defines the General Motors UART Serial Data Communications bus, commonly referred to as GM UART. This document should be used in conjunction with SAE J 2534-2 in order to enhance an SAE J 2534 interface to also provide the capability to program ECUs with EM UART. SAE J 2534-1 includes requirements for an interface that can be used to program certain emission-related Electronic Control Units (ECUs)as required by U.S. regulations, and SAE J 2534-2 defines enhanced functionality required to program additional ECUs not mandated by current U.S. regulations. The purpose of this document is to specify the requirements necessary to implement GM UART in an enhanced SAE J 2534 interface intended for use by independent automotive service facilities to program GM UART ECUs in General Motors vehicles.

General Motors UART Serial Data Communications

SAE J1128-2005 低压主回路电缆

This standard covers low voltage primary cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. The tests are intended to quality cables for nominal applications with limited exposure to fluids and physical abuse.

Low Voltage Primary Cable

SAE J1127-2005 低压蓄电池电缆

This SAE Standard covers low voltary battery cable intended for use at a nominal system voltage of 60 V DC (25 V AC) or less in surface vehicle electrical systems. The tests are intended to quality cables for normal applications with limited exposure to fluids and physical abuse.

Low Voltage Battery Cable

ISO 8092-2:2005 道路车辆.车载电气线束的联结.第2部分:定义、试验方法和一般性能要求

This part of ISO 8092 defines terms, and specifies test methods and general performance requirements for single-pole and multi-pole connections used with on-board electrical wiring harnesses of road vehicles. This part of ISO 8092 is applicable to connectors designed to be disconnected after mounting in the vehicle for repair and maintenance only. It does not cover one-part connections, i.e. where one part of the connection has direct contact to the pattern of the printed circuit board. This part of ISO 8092 is not applicable to internal connections of electronic devices.

Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements

ISO 15031-6:2005 道路车辆.车辆与发射相关诊断用外部设备间的通信.第6部分:故障诊断编码定义

This part of ISO 15031 provides recommended uniformity for alphanumeric trouble codes. It further provides guidance for uniform messages associated with these codes. It specifies several sections addressing format, structure, messages and a few examples, and is applicable to electrical/electronic systems diagnostics of motor vehicles. Annex A specifies the diagnostic trouble code naming guidelines for signals from components, signals to components, system based diagnostics, and signals using a subfault strategy. Annex B specifies the actual code assignments and description for powertrain system diagnostic trouble codes. Annex C specifies the actual code assignments and description for network communication system diagnostic trouble codes, body system diagnostic trouble codes, and chassis system diagnostic trouble codes. Annex D specifies the DTC failure category and Subtype definition of the DTC failure type byte which is an extension of a base DTC to more precisely describe the fault symptom of the DTC.

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions

ISO 17356-4:2005 道路车辆.嵌入式机动车装置用开放式界面.第4部分:OSEK/VDX通讯(COM)

This part of ISO 17356-4 (COM) specifies a uniform communication environment for automatic control unit application software. It increases the portability of application software modules by defining common software communication interfaces and behaviours for internal communication (communication within an ECU) and external communication (communication between networked vehicle nodes), which is independent of the used communication protocol.

Road vehicles - Open interface for embedded automotive applications - Part 4: OSEK/VDX Communication (COM)

ISO 17356-3:2005 道路车辆.嵌入式机动车装置用开放式界面.第3部分:OSEK/VDX操作系统(OS)

OSEK/VDX is a joint project of the automotive industry. It aims at an industry standard for an open-ended architecture for distributed control units in vehicles. This part of ISO 17356 describes the concept of a real-time operating system, capable of multitasking, which can be used for motor vehicles. It is not a product description which relates to a specific implementation. It also specifies the operating system Application Program Interface (API). General conventions, explanations of terms and abbreviations have been compiled in ISO 17356-1. ISO 17356-6 describes implementation and system generation aspects. The specification of the OS represents a uniform environment which supports efficient utilization of resources for automotive control unit application software. The OS is a single processor operating system meant for distributed embedded control units.

Road vehicles - Open interface for embedded automotive applications - Part 3: OSEK/VDX Operating System (OS)

SN/T 1669-2005 进出口汽车用电动冷却风扇检验规程

本标准规定了进出口汽车用电动冷却风扇的技术要求、检验及判定。 本标准适用于额定电压为12V的汽车用电动冷却风扇。 对评价电动冷却风扇性能的各项参数的额定值，本标准不作规定。 本标准应与产品相关的技术条件一起使用，本标准未规定的其他要求，可参照产品相关的技术条件。

Rules for the inspection of electric cooling fans of automobile for import and export

SANS 4091:2005 道路车辆．用于牵引车辆和被牵引车辆之间的电气连接的连接器．定义，试验和要求

Gives definitions and specifies tests and requirements for connectors used for the electric connection of towing and towed road vehicles.

Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements

SANS 12098:2005 道路车辆.用于牵引及牵引车辆的电气连接器.标称电压为24伏的15极车辆连接器

Specifies the dimensions, the contact allocation and test requirements for 15-pole connectors for the electrical connection of equipment other than braking systems and running gear of towing and towed vehicles with 24 V nominal supply voltage. Also specifies a park socket used to receive and store the plug when disconnected, and a means of adaptation between 7-pole and 15-pole connectors.

Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 15-pole connector for vehicles with 24 V nominal supply voltage

SANS 11446:2005 道路车辆.用于牵引及牵引车辆的电气连接器.标称电压为12伏的13极车辆连接器

Specifies the dimensional characteristics, contact allocations and test requirements for 13-pole connectors for the electrical connection of towing and towed vehicles with 12 V nominal supply voltage. Also specifies a park socket for receiving and storing the plug when it is disconnected.

Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 13-pole connectors for vehicles with 12 V nominal supply voltage