T36 电子、电气设备 标准查询与下载

SAE J2683-2005 移动空调系统中使用的二氧化碳(CO2 R-744)的制冷剂纯度和容器要求

This SAE Standard applies to Carbon Dioxide R-744 refrigerant used to service motor vehicle passenger air-conditioning (A/C) systems designed to use CO (R-744).

Refrigerant Purity and Container Requirement for Carbon Dioxide (CO₂ R-744) Used in Mobile Air-Conditioning Systems

ISO 15031-4:2005 道路车辆.排放相关的诊断用车辆和外部设备之间的通信.第4部分:外部试验设备

The document specifies: — a means of establishing communications between an OBD-equipped vehicle and external test equipment, — a set of diagnostic services to be provided by the external test equipment in order to exercise the services defined in ISO 15031-5, — conformance criteria for the external test equipment.

Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 4: External test equipment (Second Edition)

SAE J1766-2005 电动车和混合电动车电池系统碰撞完整性试验的推荐规程

Electric, Fuel Cell and Hybrid vehicles may contain many types of high voltage systems. Adequate barriers between occupants and the high voltage systems are necessary to provide protection from potentially harmful electric current and materials within the high voltage system that can cause injury to occupants of the vehicle during a crash. This SAE Recommended Practice is applicable to all Electric, Fuel Cell and Hybrid vehicle designs that are comprised of at least one voltage bus with a nominal voltage greater than or equal to 60 Volts DC or 30 VAC. This Recommended Practice addresses electrical isolation integrity, electrolyte spillage, and retention of the battery system.

Recommended Practice for Electric and Hybrid Electric Vehicle Battery Systems Crash Integrity Testing

05/30111735 DC-2005 ISO 4141-2:道路车辆.多芯电缆.第2部分:高性能铠装电缆的试验方法和要求

ISO 4141-2: Road vehicles - Multi-core cables - Part 2: Test methods and requirements for high performance sheathed cables

GJB 5402-2005 改装车用自发电机组规范

本规范规定了由改装车发动机驱动的发电机组（以下简称机组）的技术要求、试验方法、质量保证规定、运输、贮存等内容。 本规范适用于由汽车发动机驱动交流工频（50/60Hz）、中频（400Hz）、直流发电机的改装车用自发电机组的研制、生产和验收。

Specification for self-generating sets in special vehicles

ISO 8820-2:2005 道路车辆.熔断器.第2部分:用户指南

This part of ISO 8820 gives guidance for the choice and application of automotive fuse-links (see Annex A). It describes the various parameters which have to be taken into account when selecting fuse-links. It is intended to be used in conjunction with the other parts of ISO 8820.

Road vehicles - Fuse-links - Part 2: User's guide

ISO 21848:2005 道路车辆.42V电源电压的电气和电子设备.电荷载

This International Standard describes the electrical loads that can affect electric and electronic systems and components of road vehicles for a supply voltage of 42 V, which may be used in a single or a multiple voltage electrical system. In addition, it specifies the tests and resulting requirements, test equipment accuracy being agreed upon between the vehicle manufacturer and the supplier. It does not cover electromagnetic compatability (EMC). NOTE Electrical loads are independent from the mounting location. This International Standard also provides design guidance for the interaction of 42 V with other system voltages.

Road vehicles - Electrical and electronic equipment for a supply voltage of 42 V - Electrical loads

QC/T 729-2005 汽车用交流发电机技术条件

本标准规定了汽车用交流发电机的要求、试验方法、检验规则、标志、包装、贮存和保管。 本标准适用于汽车用交流发电机(以下简称交流发电机)。

Automotive altenator technical specification

QC/T 730-2005 汽车用薄壁绝缘低压电线

本标准规定了汽车用薄壁绝缘低压电线的要求、试验方法、检验规则等。 本标准适用于汽车用电气系统额定电压不大于60V(直流)单芯薄壁和超薄壁绝缘低压电线。

Road vehicle - Low tension cables with thin wall insulated

UL 1839-2005 汽车蓄电池辅助电缆

This standard contains requirements covering the investigation of battery booster cables. It specifies the properties of battery booster cables and the requirements for investigation of these properties. It applies to battery booster cable sets used for providing a temporary connection of a surface vehicle battery of up to 24 volts to another similar battery to provide emergency starting power when required.

UL Standard for Safety Automotive Battery Booster Cables First Edition; Reprint with revisions through and including October 2, 2007

KS B ISO 1044:2004 工业车辆.电动车辆牵引用铅酸蓄电池.优先选用的电压

이 규격은 전동식 산업용 지게차용 납산 구동 배터리의 전압을 규정한다.

Industrial trucks-Lead-acid traction batteries for electric trucks-Preferred voltages

SAE J1113/28-2004 车辆部件电磁兼容性的测量规程.第28部分:辐射电磁场抗扰性.混响法(模式调谐)

Vehicle electrical/electronic systems may be affected when immersed in an electromagnetic field generated by sources such as radio and TV broadcast stations, radar and communication sites, mobile transmitters, cellular phones, etc. Reverberation method is used to evaluate the immunity of electronic devices in the frequency range of 400 MHz - 18GHz. Pulse modulation is used for testing above 800 MHz. This document provides the component design and test engineers with a test procedure and the performance requirements necessary to evaluate the immunity of electronic devices to radiated electromagnetic fields early in the design stage as well as pilot and production stages. Ensuring electromagnetic compatibility early in the development stage will minimize costly changes later in the program and will prevent excessive component level hardening during full-vehicle level testing. The reverberation test method performs a dual function: The primary function of the method is to provide a bench test procedure correlatable to vehicle level radiated immunity testing in the anechoic chamber and at mobile transmitter sites. The method can be used to evaluate the relative performance of different designs of the same device.

Electromagnetic Compatibility Measurements Procedure for Vheicle Components Part 28 Immunity to Radiated Electromagnetic Fields Reverberation Method (Mode Tuning)

ISO 16844-3:2004 道路车辆.速度记录器系统.第3部分:动作传感器接口

This part of ISO 16844 specifies the physical and data link layers of the electrical interface connecting a motion sensor to a vehicle unit, used in tachograph systems in road vehicles to perform speed signal transmission and data interchange.

Road vehicles - Tachograph systems - Part 3: Motion sensor interface

QC/T 720-2004 汽车空调术语

本标准规定了汽车空调用术语及其定义。 　　本标准适用于M类、N类车辆用空调。

Auto air condition vocabulary

SAE J1625-2004 重型断路器

This SAE Standard defines the test conditions, procedures, and performance requirements for circuitbreakers in ratings from 50 to 200 A. This document covers automatic reset, modified reset and manualreset types of circuit breakers for low voltage DC systems (12 V and 24 V).NOTE— It is technically feasible for circuit breakers in this general class to be provided in amperage ratings below 50 A. In those instances, the procedures as detailed herein may be used providedcompensation is made for test currents, test leads, and power supply requirements. Additionalguidance may be obtained from SAE J553 – Circuit Breakers.1.1 Operational requirements for 42V vehicular electrical systems are under development as of thisrevision. The electrical environment is not completely defined, particularly as it relates to other components that would influence circuit breaker function (such as storage battery technology, charging system design and operational characteristics). The test and evaluation requirements of this standard are sufficient to determine relative performance concerning current carrying capability, environmental durability, and general requirements regardless of maximum voltagerating. It is anticipated that a separate technical document will be created to capture requirementsunique to 42V electrical system architecture and load characteristics.

Heavy-Duty Circuit Breakers

SANS 10169:2004 在机动车上安装音响报警装备（汽笛）后的性能测定

Covers the measurement of the sound level of audible warning devices after these have been installed in motor vehicles of categories other than category L.

Determining the performance of audible warning devices (hooters) after installation in a motor vehicle

NF R13-715-2:2004 道路车辆.牵引和被牵引车辆之间电气连接的数字信息的交换.第2部分:制动器和行驶系的应用层

Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2 : application layer for brakes and running gear.

NF R13-715-1:2004 道路车辆.牵引和被牵引车辆之间电气连接的数字信息的交换.第1部分:物理层和数据链接层

Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 1 : physical layer and data-link layer.

NF R13-715-3:2004 道路车辆.牵引和被牵引车辆之间电气连接的数字信息的交换.第3部分:除制动器和行驶系以外的设备用应用层

Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 3 : application layer for equipment other than brakes and running gear.

NF R13-013-3:2004 道路车辆.窄带辐射电磁能产生的电子干扰用部件试验方法.第3部分:横向电磁模式元件

Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3 : transverse electromagnetic (TEM) cell.